摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

aluminum 2-methoxyethoxide | 30309-57-0

中文名称
——
中文别名
——
英文名称
aluminum 2-methoxyethoxide
英文别名
tri(methoxyethoxy)aluminum;aluminium 2-methoxyethoxide;Aluminium-2-methoxyethylat;2-Methoxyethoxyaluminum(2+)
aluminum 2-methoxyethoxide化学式
CAS
30309-57-0
化学式
C9H21AlO6
mdl
——
分子量
252.244
InChiKey
JKZVHPVLCRFFSQ-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    -0.27
  • 重原子数:
    6
  • 可旋转键数:
    2
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    1.0
  • 拓扑面积:
    18.5
  • 氢给体数:
    0
  • 氢受体数:
    2

反应信息

  • 作为反应物:
    描述:
    aluminum 2-methoxyethoxide硝酸 作用下, 以 乙醇 为溶剂, 反应 9.0h, 生成 alumina
    参考文献:
    名称:
    从烷氧基铝前体轻松合成高度热稳定的纳米多孔γ-氧化铝†
    摘要:
    研究了铝醇盐单源前驱物对非离子型三嵌段共聚物P123溶胶-凝胶合成高度热稳定的纳米结构氧化铝的影响。通过有效的一步法,利用蒸发诱导自组装(EISA)方法从醇盐前体开始,通过高效的一步法合成了具有大的单峰或双峰可及孔隙的不同晶体纳米多孔氧化铝材料。通过从异丙醇(O i Pr)(作为烷氧基)到酚盐(OPh)(作为芳氧基)到在其中存在的醚功能的变化,探索了分子铝前体中不同类型有机基团的影响。以甲氧基乙醇(OCH 2 CH 2OCH 3)和甲氧基乙氧基乙氧基(OCH 2 CH 2 OCH 2 CH 2 OCH 3)基团。制备的样品的特征在于小角度和广角X射线衍射,N 2吸附-解吸,TGA-DTA和TEM测量。对于所制备的氧化铝,发现其孔隙率,表面积,优异的热稳定性以及可调节的孔径分布,这使其适合于在需要单孔或双峰可及孔的不同工艺中的潜在应用。
    DOI:
    10.1039/c5ra05883j
  • 作为产物:
    描述:
    乙二醇甲醚 、 aluminum isopropoxide 以 甲苯 为溶剂, 生成 aluminum 2-methoxyethoxide
    参考文献:
    名称:
    从烷氧基铝前体轻松合成高度热稳定的纳米多孔γ-氧化铝†
    摘要:
    研究了铝醇盐单源前驱物对非离子型三嵌段共聚物P123溶胶-凝胶合成高度热稳定的纳米结构氧化铝的影响。通过有效的一步法,利用蒸发诱导自组装(EISA)方法从醇盐前体开始,通过高效的一步法合成了具有大的单峰或双峰可及孔隙的不同晶体纳米多孔氧化铝材料。通过从异丙醇(O i Pr)(作为烷氧基)到酚盐(OPh)(作为芳氧基)到在其中存在的醚功能的变化,探索了分子铝前体中不同类型有机基团的影响。以甲氧基乙醇(OCH 2 CH 2OCH 3)和甲氧基乙氧基乙氧基(OCH 2 CH 2 OCH 2 CH 2 OCH 3)基团。制备的样品的特征在于小角度和广角X射线衍射,N 2吸附-解吸,TGA-DTA和TEM测量。对于所制备的氧化铝,发现其孔隙率,表面积,优异的热稳定性以及可调节的孔径分布,这使其适合于在需要单孔或双峰可及孔的不同工艺中的潜在应用。
    DOI:
    10.1039/c5ra05883j
  • 作为试剂:
    参考文献:
    名称:
    [EN] 4'-THIONUCLEOSIDES AND OLIGOMERIC COMPOUNDS
    [FR] 4'-THIONUCLEOSIDES ET COMPOSES D'OLIGOMERES
    摘要:
    公开号:
    WO2005027962A3
点击查看最新优质反应信息

文献信息

  • A facile, green and efficient surfactant-free method for synthesis of aluminum nanooxides with an extraordinary high surface area
    作者:Gholamhossein Mohammadnezhad、Oluseun Akintola、Winfried Plass、Frank Steiniger、Martin Westermann
    DOI:10.1039/c6dt00611f
    日期:——
    Nano boehmite with unprecedented high surface area and pore volume (802 m2 g−1, 2.35 cm3 g−1) was prepared using a facile, green and efficient surfactant-free synthesis method. The structure of the material is characterized by the presence of plates with varying thicknesses and morphologies. The calcined samples show curved and rolled plates with a nanotube-like appearance.
    纳米勃姆石具有前所未有的高的表面积和孔隙体积(802米2克-1,2.35厘米3克-1)使用轻便,绿色和高效的无表面活性剂的合成方法制备。该材料的结构的特征在于存在具有不同厚度和形态的板。煅烧的样品显示出弯曲和卷起的板,具有类似纳米管的外观。
  • Synthesis, structure and luminescence study of a binuclear aluminium complex: A novel structure containing six coordinated aluminium atoms in two distinct coordination geometries
    作者:Mostafa M. Amini、Massomeh Sharbatdaran、Mehdi Mirzaee、Payman Mirzaei
    DOI:10.1016/j.poly.2006.05.031
    日期:2006.12
    binuclear complexes of aluminium alkoxides were prepared by the reaction of 8-hydroxyquinoline with aluminium 2-methoxyethoxide and aluminium 2-ethoxyethoxide in refluxing benzene. Both compounds, [Al(C9H6NO)2(μ-OCH2CH2OR)]2 [where R = CH3 (1) and C2H5 (2)], have been characterized by elemental analysis and spectral studies. The molecular structure determination of compound 2 by single crystal X-ray analysis
    通过使8-羟基喹啉与2-甲氧基乙醇铝和2-乙氧基乙醇铝在回流的苯中反应来制备新型的烷氧基铝双核配合物。这两种化合物,[铝(C 9 H ^ 6 NO)2(μ-OCH 2 CH 2 OR)] 2 [其中R = CH 3(1)和C 2 H ^ 5(2)],已经通过元素分析和光谱研究。通过单晶X射线分析确定化合物2的分子结构,发现存在离散的不对称二聚体(C 2(对称性)包含两个不同配位几何结构的铝原子,它们通过两个桥连的烷氧基相互连接。化合物1和2的27 Al NMR光谱表明,络合物的固态结构没有保留在溶液中,并且在溶液中形成了四配位的铝原子。两种化合物在被紫外线照射时均显示出发光。比旋光度测量表明,对于两种复合物,溶液中都存在额外的对映异构体(ee)。两种烷氧基铝的羟基喹啉衍生物在普通有机溶剂中均具有良好的溶解性,并具有合适的热稳定性。
  • Calcium alkoxyalanates
    作者:G. Dozzi、S. Cucinella、M. Bruzzone
    DOI:10.1016/s0022-328x(00)82562-0
    日期:1982.1
  • ——
    作者:S. H LIM、T. H NOH、Y. J BAE、H. K CHAE、Y. S CHOI
    DOI:10.1023/a:1018615104519
    日期:——
    The metal oxides MgO, BaO, Al2O3, SiO2, MgO-Al2O3, CaO-Al2O3, SrO-Al2O3, BaO-Al2O3 and MgO-SiO2 have been coated onto ribbons of the Fe-based amorphous alloy Metglas 2605S3A using a set-gel process. The effects of the surface coating on the magnetic properties of the alloy are investigated. The d.c. hysteresis loop for ribbons coated with MgO and MgO-Al2O3 is more square shaped than that for the uncoated ribbon. For ribbons coated with BaO, SrO-Al2O3 and BaO-Al2O3 it is more inclined than for the uncoated ribbon. Significant differences in the frequency dependence of the effective permeability are observed that depend on the nature of the coated oxides. The core loss is also affected by the coating. These results may be explained in terms of a stress induced by the coating and the modification of the domain structure via elastic and/or magnetoelastic interactions. It is thought from the magnetoelastic interactions that the MgO and MgO-Al2O3 coatings induce tensile stresses whilst those of BaO, SrO-Al2O3 and BaO-Al2O3 induce compressive stresses.
  • Facile synthesis of highly thermally stable nanoporous γ-aluminas from aluminum alkoxide precursors
    作者:Gholamhossein Mohammadnezhad、Oluseun Akintola、Winfried Plass、Felix H. Schacher、Frank Steiniger、Martin Westermann
    DOI:10.1039/c5ra05883j
    日期:——
    The effects of aluminum alkoxide single source precursors on the sol–gel synthesis of highly thermally stable nanostructured alumina by nonionic triblock copolymer P123 were investigated. Different crystalline nanoporous alumina materials with large single or bimodal accessible pores were synthesized via an efficient single-step process starting from alkoxide precursors utilizing the evaporation-induced
    研究了铝醇盐单源前驱物对非离子型三嵌段共聚物P123溶胶-凝胶合成高度热稳定的纳米结构氧化铝的影响。通过有效的一步法,利用蒸发诱导自组装(EISA)方法从醇盐前体开始,通过高效的一步法合成了具有大的单峰或双峰可及孔隙的不同晶体纳米多孔氧化铝材料。通过从异丙醇(O i Pr)(作为烷氧基)到酚盐(OPh)(作为芳氧基)到在其中存在的醚功能的变化,探索了分子铝前体中不同类型有机基团的影响。以甲氧基乙醇(OCH 2 CH 2OCH 3)和甲氧基乙氧基乙氧基(OCH 2 CH 2 OCH 2 CH 2 OCH 3)基团。制备的样品的特征在于小角度和广角X射线衍射,N 2吸附-解吸,TGA-DTA和TEM测量。对于所制备的氧化铝,发现其孔隙率,表面积,优异的热稳定性以及可调节的孔径分布,这使其适合于在需要单孔或双峰可及孔的不同工艺中的潜在应用。
查看更多