Dodecen-(11)-saeuredimethylamid | 21950-82-3

• 分子结构分类: 有机化合物 - 脂质和类脂质分子 - 脂肪酰基
• 英文名称: Dodecen-(11)-saeuredimethylamid
• 英文别名: N,N-dimethyldodec-11-enamide
• CAS: 21950-82-3
• 化学式: C₁₄H₂₇NO
• 分子量: 225.374
• InChiKey: QYNFTKGMXJJGCM-UHFFFAOYSA-N

物化性质

• 沸点：
  314.0±11.0 °C(Predicted)
• 密度：
  0.869±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  4.3
• 重原子数：
  16
• 可旋转键数：
  10
• 环数：
  0.0
• sp3杂化的碳原子比例：
  0.79
• 拓扑面积：
  20.3
• 氢给体数：
  0
• 氢受体数：
  1

反应信息

• 作为反应物：
  描述：

  Dodecen-(11)-saeuredimethylamid 在 lithium aluminium tetrahydride 、 三乙胺-硼烷 作用下， 生成 12-dimethylamino-1-dodecanol
  参考文献：
  名称：

  Ferles,M. et al., Zeitschrift fur Chemie, 1968, vol. 8, # 10, p. 380 - 381

  摘要：

  DOI：
• 作为产物：
  描述：

  10-十一烯-1-醇 在 吡啶 、 (4,4'-di-tert-butyl-2,2'-dipyridyl)-bis-(2-phenylpyridine(-1H))-iridium(III) hexafluorophosphate 、 NiBr₂(dtbbpy) 、 sodium acetate 作用下， 以 四氢呋喃 、 甲基叔丁基醚 为溶剂， 反应 12.17h， 生成 Dodecen-(11)-saeuredimethylamid
  参考文献：
  名称：

  镍催化醇与氨基甲酰氯的脱氧酰胺化

  摘要：

  我们报道了醇与氨基甲酰氯的脱氧酰胺化反应，通过镍-光氧化还原双重催化生成酰胺。即使对于不同的复合糖和类固醇衍生物也可以获得良好到优异的产率。该反应是可扩展的，并且通过醇的同系化证明了该反应的合成效用，可产生几种重要的γ-氨基醇和合成上具有挑战性的生物活性化合物中间体。

  DOI：

  10.1021/acs.orglett.4c00519

文献信息

• Stereoselective Iodocyclopropanation of Terminal Alkenes with Iodoform, Chromium(II) Chloride, and <i>N</i>,<i>N</i>,<i>N</i>‘,<i>N</i>‘-Tetraethylethylenediamine
  作者：Kazuhiko Takai、Shota Toshikawa、Atsushi Inoue、Ryo Kokumai

  DOI：10.1021/ja0373061

  日期：2003.10.1

  Chemoselectivity of a reagent for (E)-olefination of aldehydes derived by reduction of iodoform with chromium(II) chloride in THF changes markedly by addition of TEEDA (N,N,N',N'-tetraethylethylenediamine), and trans-iodocyclopropanes are produced stereoselectively from terminal alkenes by treatment with the base-added reagent system. The iodocyclopropanation occurs only at terminal double bonds, and

  通过加入 TEEDA（N,N,N',N'-四乙基乙二胺）和反式碘代环丙烷，通过在 THF 中用氯化铬 (II) 还原碘仿而得到的醛的 (E)-烯化试剂的化学选择性显着变化通过用加碱试剂系统处理，从末端烯烃立体选择性地产生。碘环丙烷化仅发生在末端双键处，同一分子中的二取代和三取代双键保持不变。醇、醚、甲硅烷基醚、酯、叔胺和酰胺基等官能团与反应条件相适应。
• Heterosubstituted cyclopropanation of alkenes with organochromium reagents derived from heterosubstituted dihalomethanes, CrCl2, and tetraalkylethylenediamine
  作者：Kazuhiko Takai、Shota Toshikawa、Atsushi Inoue、Ryo Kokumai、Masato Hirano

  DOI：10.1016/j.jorganchem.2006.06.047

  日期：2007.1

  stereoselectively from terminal alkenes by treatment with a reagent derived from iodoform, chromium(II) chloride, and TEEDA (N,N,N′,N′-tetraethylethylenediamine) in THF. Similarly, cyclopropylsilanes and cyclopropylboronic esters are obtained by using R3SiCHI2, and a combination of Cl2CHB(OR)2 and LiI instead of iodoform, respectively. The heterocyclopropanation occurs selectively at terminal double bonds, and

  的Iodocyclopropanes反式构型立体选择性地被从末端烯烃通过处理产生与来自碘仿衍生的试剂，铬（II），氯化和TEEDA（Ñ，Ñ，Ñ '，Ñ '-tetraethylethylenediamine）的THF溶液。类似地，通过使用R 3 SiCHI 2和Cl 2 CHB（OR）2的组合获得环丙基硅烷和环丙基硼酸酯和LiI分别代替碘仿。杂环丙烷化选择性地在末端双键处发生，并且相同分子中的二取代和三取代的双键保持不变。诸如醇，醚，甲硅烷基醚，酯，叔胺和酰胺基团的官能团与反应条件相容。
• Polar group-containing olefin copolymer, process for preparing the same, thermoplastic resin composition contaning the copolymer, and uses thereof
  申请人：MITSUI CHEMICALS, INC.

  公开号：EP1186619A2

  公开（公告）日：2002-03-13

  The present invention is intended to provide a polar group-containing olefin copolymer having excellent adhesion properties to metals or polar resins and excellent compatibility therewith, a process for preparing the copolymer, a thermoplastic resin composition containing the copolymer, and uses thereof. The polar group-containing olefin copolymer comprises a constituent unit derived from an α-olefin of 2 to 20 carbon atoms, and a constituent unit derived from a straight-chain, branched or cyclic polar group-containing monomer having at the end a polar group such as a hydroxyl group or an epoxy group and/or a constituent unit derived from a macromonomer having at the end a polymer segment obtained by anionic polymerization, ring-opening polymerization or polycondensation. The polar group-containing olefin copolymer can be prepared by polymerizing the α-olefin with the polar group-containing monomer and/or the macromonomer in the presence of a metallocene catalyst. The polar group-containing olefin copolymer and the thermoplastic resin composition containing the copolymer are used for films, sheets, modifiers, building/civil engineering materials, automobile exterior trim, electric/electronic parts, coating bases, compatibilizing agents, etc.

  本发明旨在提供一种对金属或极性树脂具有极佳粘附性和相容性的含极性基团的烯烃共聚物、制备该共聚物的工艺、含有该共聚物的热塑性树脂组合物及其用途。含极性基团的烯烃共聚物包括一个由 2 至 20 个碳原子的 α-烯烃衍生的组成单元和一个由直链、支链或环状含极性基团单体衍生的组成单元，直链、支链或环状含极性基团单体的末端具有极性基团，如羟基或环氧基，和/或一个由大单体衍生的组成单元，大单体的末端具有通过阴离子聚合、开环聚合或缩聚反应获得的聚合物段。含极性基团的烯烃共聚物可通过在茂金属催化剂存在下使α-烯烃与含极性基团的单体和/或大单体聚合来制备。含极性基团的烯烃共聚物和含有该共聚物的热塑性树脂组合物可用于薄膜、板材、改性剂、建筑/土木工程材料、汽车外饰、电气/电子零件、涂层基料、相容剂等。
• Polar group-containing olefin copolymer, process for preparing the same, thermoplastic resin composition containing the copolymer, and uses thereof
  申请人：——

  公开号：US20020156207A1

  公开（公告）日：2002-10-24

  The present invention is intended to provide a polar group-containing olefin copolymer having excellent adhesion properties to metals or polar resins and excellent compatibility therewith, a process for preparing the copolymer, a thermoplastic resin composition containing the copolymer, and uses thereof. The polar group-containing olefin copolymer comprises a constituent unit derived from an &agr;-olefin of 2 to 20 carbon atoms, and a constituent unit derived from a straight-chain, branched or cyclic polar group-containing monomer having at the end a polar group such as a hydroxyl group or an epoxy group and/or a constituent unit derived from a macromonomer having at the end a polymer segment obtained by anionic polymerization, ring-opening polymerization or polycondensation. The polar group-containing olefin copolymer can be prepared by polymerizing the &agr;-olefin with the polar group-containing monomer and/or the macromonomer in the presence of a metallocene catalyst. The polar group-containing olefin copolymer and the thermoplastic resin composition containing the copolymer are used for films, sheets, modifiers, building/civil engineering materials, automobile exterior trim, electric/electronic parts, coating bases, compatibilizing agents, etc.

  本发明旨在提供一种对金属或极性树脂具有极佳粘附性能和极佳相容性的含极性基团的烯烃共聚物、制备该共聚物的工艺、含有该共聚物的热塑性树脂组合物及其用途。含极性基团的烯烃共聚物包括一个由 2 至 20 个碳原子的&agr;-烯烃衍生的组成单元，以及一个由直链、支链或环状含极性基团单体衍生的组成单元，该单体末端具有极性基团，如羟基或环氧基，和/或一个由大单体衍生的组成单元，该大单体末端具有通过阴离子聚合、开环聚合或缩聚反应获得的聚合物段。含极性基团的烯烃共聚物可通过在茂金属催化剂存在下，将&agr;-烯烃与含极性基团的单体和/或大单体进行聚合来制备。含极性基团的烯烃共聚物和含有该共聚物的热塑性树脂组合物可用于薄膜、板材、改性剂、建筑/土木工程材料、汽车外饰、电气/电子零件、涂层基料、相容剂等。
• Polar group-containing olefin copolymer, process for preparing the same, thermoplastic resin composition containing the copolymer and uses thereof
  申请人：Mitsui Chemicals, Inc.

  公开号：EP1734061B1

  公开（公告）日：2010-04-07