5-溴甲基-4-甲基-2-苯基-1,3-噻唑 | 181424-15-7

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 唑类
• 中文名称: 5-溴甲基-4-甲基-2-苯基-1,3-噻唑
• 中文别名: 5-(溴甲基)-4-甲基-2-苯基-1,3-噻唑
• 英文名称: 5-(bromomethyl)-4-methyl-2-[4-phenyl]-1,3-thiazole
• 英文别名: 5-(Bromomethyl)-4-methyl-2-phenyl-1,3-thiazole
• CAS: 181424-15-7
• 化学式: C₁₁H₁₀BrNS
• 分子量: 268.177
• InChiKey: JIYKQPNREFZLCN-UHFFFAOYSA-N

物化性质

• 熔点：
  87 °C
• 沸点：
  375.9±34.0 °C(Predicted)
• 密度：
  1.463±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  3.6
• 重原子数：
  14
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.18
• 拓扑面积：
  41.1
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 危险等级：
  IRRITANT
• 海关编码：
  2934100090

SDS

Name:	5-(Bromomethyl)-4-methyl-2-phenyl-1 3-thiazole Material Safety Data Sheet
Synonym:
CAS:	181424-15-7

Section 1 - Chemical Product MSDS Name:5-(Bromomethyl)-4-methyl-2-phenyl-1 3-thiazole Material Safety Data Sheet
Synonym:

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
181424-15-7	5-(Bromomethyl)-4-methyl-2-phenyl-1,3-	TECH	unlisted

Hazard Symbols: C
Risk Phrases: 20/21/22 34

---

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful by inhalation, in contact with skin and if swallowed. Causes burns.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Harmful if absorbed through the skin. Causes skin burns.
Ingestion:
Harmful if swallowed. Causes gastrointestinal tract burns.
Inhalation:
Harmful if inhaled. Causes chemical burns to the respiratory tract.
Chronic:
Not available.

---

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.

---

Section 7 - HANDLING and STORAGE
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 181424-15-7: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: Yellow
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 86 - 90 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H10BrNS
Molecular Weight: 268.18

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials.
Incompatibilities with Other Materials:
Strong oxidizing agents, strong bases, amines.
Hazardous Decomposition Products:
Carbon monoxide, oxides of nitrogen, oxides of sulfur, carbon dioxide, hydrogen bromide, bromine.
Hazardous Polymerization: Not available.

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 181424-15-7 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
5-(Bromomethyl)-4-methyl-2-phenyl-1,3-thiazole - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 20/21/22 Harmful by inhalation, in contact with
skin and if swallowed.
R 34 Causes burns.
Safety Phrases:
S 22 Do not breathe dust.
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 181424-15-7: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 181424-15-7 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 181424-15-7 is not listed on the TSCA inventory.
It is for research and development use only.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  5-溴甲基-4-甲基-2-苯基-1,3-噻唑 在 邻苯二甲酸亚胺 作用下， 以 二氯甲烷 、 甲苯 、 乙腈 为溶剂， 反应 5.0h， 生成 (2-(((4-methyl-2-phenylthiazol-5-yl)methyl)amino)-2-oxoethyl)triphenylphosphonium bromide
  参考文献：
  名称：

  作为癌细胞线粒体靶向抑制剂的新型噻唑衍生物的设计、合成和生物学评价

  摘要：

  线粒体是细胞维持必要代谢活动的关键能量生产来源。针对功能失调的线粒体特征一直是线粒体相关疾病研究的热点。对癌性线粒体代谢的研究是肿瘤治疗中持续关注的问题。在此，我们基于我们早期对线粒体靶向剂的研究，着手评估新型 TPP-噻唑衍生物家族的抗癌活性。具体而言，我们设计并合成了一系列 TPP-噻唑衍生物，并通过 MTT 测定显示大多数合成的化合物有效抑制了三种癌细胞系（HeLa、PC3 和 MCF-7）。在结构修改后，我们探索了 SAR 关系并确定了最有希望的化合物R13（IC50 of 5.52 μM) 用于进一步研究。同时，我们进行了 ATP 产生测定以评估所选化合物对 HeLa 细胞能量产生的抑制作用。结果显示测试化合物显着抑制癌细胞的ATP产生。总体而言，我们设计并合成了一系列对癌细胞具有显着细胞毒性并有效抑制线粒体能量产生的化合物。

  DOI：

  10.1016/j.bioorg.2021.105015
• 作为产物：
  描述：

  4-甲基-2-苯基-1,3-噻唑-5-甲酸乙酯 在 lithium aluminium tetrahydride 、 三溴化磷 作用下， 以 四氢呋喃 、 二氯甲烷 为溶剂， 反应 5.0h， 生成 5-溴甲基-4-甲基-2-苯基-1,3-噻唑
  参考文献：
  名称：

  作为癌细胞线粒体靶向抑制剂的新型噻唑衍生物的设计、合成和生物学评价

  摘要：

  线粒体是细胞维持必要代谢活动的关键能量生产来源。针对功能失调的线粒体特征一直是线粒体相关疾病研究的热点。对癌性线粒体代谢的研究是肿瘤治疗中持续关注的问题。在此，我们基于我们早期对线粒体靶向剂的研究，着手评估新型 TPP-噻唑衍生物家族的抗癌活性。具体而言，我们设计并合成了一系列 TPP-噻唑衍生物，并通过 MTT 测定显示大多数合成的化合物有效抑制了三种癌细胞系（HeLa、PC3 和 MCF-7）。在结构修改后，我们探索了 SAR 关系并确定了最有希望的化合物R13（IC50 of 5.52 μM) 用于进一步研究。同时，我们进行了 ATP 产生测定以评估所选化合物对 HeLa 细胞能量产生的抑制作用。结果显示测试化合物显着抑制癌细胞的ATP产生。总体而言，我们设计并合成了一系列对癌细胞具有显着细胞毒性并有效抑制线粒体能量产生的化合物。

  DOI：

  10.1016/j.bioorg.2021.105015

文献信息

• PAR4 AGONIST PEPTIDES
  申请人：Bristol-Myers Squibb Company

  公开号：US20130289238A1

  公开（公告）日：2013-10-31

  The present invention provides PAR4 agonist peptides. These peptides are useful for developing robust PAR4 receptor assays.

  本发明提供PAR4激动肽。这些肽对于开发强大的PAR4受体测定方法非常有用。
• IMIDAZOTHIADIAZOLE AND IMIDAZOPYRAZINE DERIVATIVES AS PROTEASE ACTIVATED RECEPTOR 4 (PAR4) INHIBITORS FOR TREATING PLATELET AGGREGATION
  申请人：BRISTOL-MYERS SQUIBB COMPANY

  公开号：US20150094297A1

  公开（公告）日：2015-04-02

  The present invention provides thiazole compounds of Formula I wherein W, Y, R 0 , R 2 , R 4 , R 5 , R 6 , R 7 , X 1 , X 2 , X 3 and X 4 are as defined herein, or a stereoisomer, tautomer, pharmaceutically acceptable salt, prodrug ester or solvate form thereof, wherein all of the variables are as defined herein. These compounds are inhibitors of platelet aggregation and thus can be used as medicaments for treating or preventing thromboembolic disorders.

  本发明提供了式I的噻唑化合物，其中W、Y、R0、R2、R4、R5、R6、R7、X1、X2、X3和X4如本文所定义，或其立体异构体、互变异构体、药学上可接受的盐、前药酯或其溶剂化合物形式，其中所有变量均如本文所定义。这些化合物是血小板聚集抑制剂，因此可用作治疗或预防血栓栓塞性疾病的药物。
• Compounds modulating c-fms and/or c-kit activity and uses therefor
  申请人：Zhang Jiazhong

  公开号：US20090076046A1

  公开（公告）日：2009-03-19

  Compounds active on the receptor protein tyrosine kinases c-kit and/or c-fms are provided herewith. Also provided herewith are compositions useful for treatment of c-kit mediated diseases or conditions and/or c-fms-mediated diseases or conditions, and methods for the use thereof.

  提供了对受体蛋白酪氨酸激酶c-kit和/或c-fms活性的化合物。还提供了用于治疗c-kit介导的疾病或病状和/或c-fms介导的疾病或病状的组合物，以及使用它们的方法。
• COMPOUNDS MODULATING C-FMS AND/OR C-KIT ACTIVITY
  申请人：Zhang Jiazhong

  公开号：US20110230482A1

  公开（公告）日：2011-09-22

  Compounds active on the receptor protein tyrosine kinases c-kit and/or c-fms are provided herewith. Also provided herewith are compositions useful for treatment of c-kit mediated diseases or conditions and/or c-fms-mediated diseases or conditions, and methods for the use thereof.

  本文提供了对受体蛋白酪氨酸激酶c-kit和/或c-fms活性化合物。还提供了用于治疗c-kit介导的疾病或状况和/或c-fms介导的疾病或状况的组合物，以及其使用方法。
• COMPOUNDS MODULATING C-FMS AND/OR C-KIT ACTIVITY AND USES THEREFOR
  申请人：Zhang Jiazhong

  公开号：US20120309756A1

  公开（公告）日：2012-12-06

  Compounds active on the receptor protein tyrosine kinases c-kit and/or c-fms are provided herewith. Also provided herewith are compositions useful for treatment of c-kit mediated diseases or conditions and/or c-fms-mediated diseases or conditions, and methods for the use thereof.

  本文提供了在受体蛋白酪氨酸激酶c-kit和/或c-fms上活性化合物。还提供了用于治疗c-kit介导的疾病或状况和/或c-fms介导的疾病或状况的组合物，并提供了其使用方法。