摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

di-m-tolyl sulfide | 3111-77-1

中文名称
——
中文别名
——
英文名称
di-m-tolyl sulfide
英文别名
di-m-tolylsulfane;bis(3-methylphenyl) sulfide;Di-m-tolyl-sulfid;3,3'-dimethyldiphenyl sulfide;Benzene, 1,1'-thiobis[3-methyl-;1-methyl-3-(3-methylphenyl)sulfanylbenzene
di-m-tolyl sulfide化学式
CAS
3111-77-1
化学式
C14H14S
mdl
——
分子量
214.331
InChiKey
AWUUCLCBZNMLCD-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    4.7
  • 重原子数:
    15
  • 可旋转键数:
    2
  • 环数:
    2.0
  • sp3杂化的碳原子比例:
    0.14
  • 拓扑面积:
    25.3
  • 氢给体数:
    0
  • 氢受体数:
    1

安全信息

  • 海关编码:
    2930909090

SDS

SDS:9f81ca0e1bb0cb034121cc0a2b9e1724
查看

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    di-m-tolyl sulfide 在 palladium 、 双氧水 作用下, 以 甲醇 为溶剂, 反应 18.0h, 以92%的产率得到di(m-tolyl)sulfoxide
    参考文献:
    名称:
    对称和不对称硫化物的合成及纳米钯催化的化学选择氧化
    摘要:
    已经开发出一种高度化学选择性,高效和纳米钯催化的方案,分别通过使用H 2 O 2作为氧化剂,通过对称和不对称硫化物的氧化来快速构建亚砜和砜。起始材料的可用性,催化剂的易于回收和再利用,广泛的底物范围以及高收率使得该方案成为有吸引力的替代方案。该方法还涉及无金属和微波促进的对称的二芳基硫醚的合成,以及FeCl 3介导的芳族重氮四氟硼酸盐与Na 2 S·9H 2的反应制备对称的二芳基二硫化物。O作为硫源。另外,经由K 2 CO 3介导的四氟硼酸壬二唑鎓与对称的二硫化物的反应产生了不对称的硫化物。
    DOI:
    10.1039/c8ob03209b
  • 作为产物:
    描述:
    乙酸间甲苯酯1,2,3,4,5,6,7,8-八硫杂环辛烷 、 nickel(II) ferrite 、 sodium t-butanolate 作用下, 以 N,N-二甲基甲酰胺 为溶剂, 反应 16.0h, 以90%的产率得到di-m-tolyl sulfide
    参考文献:
    名称:
    NiFe2O4是可磁回收的纳米催化剂,可在温和绿色条件下通过在S8存在下裂解C–O键来形成无味的C–S键
    摘要:
    我们介绍了使用NiFe 2 O 4磁性纳米粒子作为可重复使用的多相纳米催化剂,通过C- O键活化一锅无味地合成不对称和对称二芳基硫化物的绿色方法。不对称硫化物的合成是在碱金属和NiFe 2 O 4磁性纳米粒子存在下,使用酚酸酯(如乙酸酯,三氟甲磺酸酯和甲苯磺酸酯)与芳基硼酸/ S 8或三苯基氯化锡/ S 8作为硫醇化剂的交叉偶联反应进行的作为催化剂,在60-85°C的聚乙二醇溶剂中。同样,使用S 8从酚类化合物合成对称的二芳基硫醚描述了在120℃下在二甲基甲酰胺中作为硫源的NiFe 2 O 4和作为催化剂的NiFe 2 O 4。使用这些方案,由于使用了可磁重复使用的双金属纳米催化剂,并且避免了使用硫醇和芳基卤化物,各种不对称和对称硫化物的合成比使用可用方案更容易。
    DOI:
    10.1002/aoc.4691
点击查看最新优质反应信息

文献信息

  • Use of Base Control To Provide High Selectivity between Diaryl Thioether and Diaryl Disulfide for C–S Coupling Reactions of Aryl Halides and Sulfur and a Mechanistic Study
    作者:Hsing-Ying Chen、Wei-Te Peng、Ying-Hsien Lee、Yu-Lun Chang、Yen-Jen Chen、Yi-Chun Lai、Nai-Yuan Jheng、Hsuan-Ying Chen
    DOI:10.1021/om400784w
    日期:2013.10.14
    Previous studies have reported that S-arylation produces diaryl disulfide when the precursors include sulfur powder and aryl halide using CuI as the catalyst. However, our research has revealed that the use of different bases in the above S-arylation process results in the coproduction of diarylsulfane and diaryldisulfane. In addition, we have demonstrated that the ratio of the two products can be
    先前的研究报道,当前体包括硫粉和使用CuI作为催化剂的芳基卤化物时,S-芳基化反应将生成二芳基二硫化物。但是,我们的研究表明,在上述S-芳基化过程中使用不同的碱会导致联产二芳基硫烷和二芳基二硫烷。另外,我们证明了可以通过选择碱的碱度来控制两种产物的比例。1个1 H NMR谱表明,二芳基二硫醚是第一产物,通过CuI催化与芳基卤化物反应生成二芳基硫烷成为试剂。使用各种不同的碱,对各种芳基卤化物进行了测试,以提高二芳基硫烷和二芳基二硫烷之间的选择性,从而得出以下原理。弱碱,例如金属碳酸盐或乙酸盐,只会产生二芳基二硫醚;强碱(例如金属氢氧化物)会同时生成二芳基二硫烷和二芳基硫烷。根据DFT计算,氢氧根离子被碘离子交换并与铜键合,从而更强烈地影响铜电子以还原二芳基二硫化物。
  • Cu (II) and Cd (II) anchored functionalized mesoporous SBA-15 as novel, highly efficient and recoverable heterogeneous catalysts for green oxidative coupling of thiols and C S cross-coupling reaction of aryl halides
    作者:Somayeh Molaei、Taiebeh Tamoradi、Mohammad Ghadermazi、Arash Ghorbani-Choghamarani
    DOI:10.1016/j.poly.2018.09.014
    日期:2018.12
    Abstract Two novel heterogeneous catalysts have been synthesized by anchoring Cu and Cd Creatinine complexes onto the surface of mesochannels of SBA-15 for highly efficient oxidative coupling of thiols to disulfides using hydrogen peroxide and synthesis of sulfides using S8 and KOH. The structure of the prepared catalysts was determined using SEM, FT-IR, X-ray diffraction, elemental analysis, N2 a
    摘要通过将Cu和Cd肌酐配合物固定在SBA-15介孔表面上,使用过氧化氢将硫醇高效氧化偶联成二硫化物,并使用S8和KOH合成硫化物,从而合成了两种新型的非均相催化剂。使用SEM,FT-IR,X射线衍射,元素分析,N2吸附-解吸分析和TGA确定了制备的催化剂的结构。催化剂显着提高了硫醇和CS键形成的氧化偶联的反应速率。催化剂被重复使用了几次,而活性没有明显损失。
  • Cu-Catalyzed Synthesis of Diaryl Thioethers and <i>S</i>-Cycles by Reaction of Aryl Iodides with Carbon Disulfide in the Presence of DBU
    作者:Peng Zhao、Hang Yin、Hongxin Gao、Chanjuan Xi
    DOI:10.1021/jo400709s
    日期:2013.5.17
    Diaryl thioethers and S-cycles were obtained on the basis of the copper-catalyzed reaction of carbon disulfide and aryl iodides in the presence of DBU. This reaction enables the one-pot synthesis of diaryl thioethers by employing cheap, available, and easy-to-handle carbon disulfide with aryl iodides. The reaction was successfully employed in the construction of sulfur-containing cyclic molecules.
    在DBU存在下,基于二硫化碳和芳基碘化物的铜催化反应,获得了二芳基硫醚和S-环。通过使用廉价,易得且易于处理的二硫化碳与芳基碘化物,该反应能够一锅合成二芳基硫醚。该反应成功地用于构建含硫的环状分子。
  • Copper-Catalyzed Production of Diaryl Sulfides Using Aryl Iodides and a Disilathiane
    作者:Norio Sakai、Yohei Ogiwara、Hiromu Maeda
    DOI:10.1055/s-0036-1591723
    日期:2018.3
    A disilathiane was found to be a novel S1 source for the copper-catalyzed synthesis of diaryl sulfides using aryl iodides. The reaction of iodoarenes and hexamethyldisilathiane, (Me 3 Si) 2 S, in the presence of a catalytic amount of CuI/1,10-phenanthroline provided various types of diaryl sulfides in good yields.
    发现二硅硫烷是使用芳基碘在铜催化下合成二芳基硫化物的新型 S1 来源。在催化量的 CuI/1,10-菲咯啉存在下,碘芳烃和六甲基二硅硫烷 (Me 3 Si) 2 S 的反应以良好的产率提供了各种类型的二芳基硫化物。
  • Copper-catalyzed direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur transfer reagent
    作者:Christopher B. Kelly、Christopher (Xiang) Lee、Nicholas E. Leadbeater
    DOI:10.1016/j.tetlet.2011.06.107
    日期:2011.9
    A method for direct preparation of diaryl sulfides from aryl iodides using potassium thiocyanate as a sulfur-transfer agent is reported. A catalyst system comprising of a simple copper salt, tetrabutylammonium bromide as a phase-transfer agent and water as the solvent is used. Microwave heating at 200 °C for 60 min allows for the conversion of a range of aryl iodides to the corresponding diaryl sulfides
    报道了一种使用硫氰酸钾作为硫转移剂从芳基碘直接制备二芳基硫的方法。使用由简单的铜盐,四丁基溴化铵作为相转移剂和水作为溶剂的催化剂体系。微波在200°C下加热60分钟,可以将一定范围的芳基碘化物转化为相应的二芳基硫醚。
查看更多