Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product identifiers Product name : L-Homoserine lactone hydrochloride CAS-No. : 2185-02-6 Relevant identified uses of the substance or mixture and uses advised against Identified uses : Laboratory chemicals, Manufacture of substances Section 2. HAZARDS IDENTIFICATION Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No 1272/2008 This substance is not classified as dangerous according to Directive 67/548/EEC. Label elements Caution - substance not yet tested completely. Other hazards - none Section 3. COMPOSITION/INFORMATION ON INGREDIENTS Substances Formula : C4H7NO2 · HCl Molecular Weight : 137,56 g/mol Section 4. FIRST AID MEASURES Description of first aid measures If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. In case of skin contact Wash off with soap and plenty of water. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Most important symptoms and effects, both acute and delayed Indication of any immediate medical attention and special treatment needed no data available Section 5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides, nitrogen oxides (NOx), Hydrogen chloride gas Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information no data available Section 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Avoid dust formation. Avoid breathing vapors, mist or gas. Environmental precautions Do not let product enter drains. Methods and materials for containment and cleaning up Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. Section 7. HANDLING AND STORAGE Precautions for safe handling Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Recommended storage temperature: -20 °C Specific end uses no data available Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls General industrial hygiene practice. Personal protective equipment Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section 9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) Appearance Form: solid b) Odour no data available c) Odour Threshold no data available d) pH no data available e) Melting point/freezing no data available point f) Initial boiling point and no data available boiling range g) Flash point no data available h) Evaporation rate no data available i) Flammability (solid, gas) no data available j) Upper/lower no data available flammability or explosive limits k) Vapour pressure no data available l) Vapour density no data available m) Relative density no data available n) Water solubility no data available o) Partition coefficient: n- no data available octanol/water p) Autoignition no data available temperature q) Decomposition no data available temperature r) Viscosity no data available s) Explosive properties no data available t) Oxidizing properties no data available Other safety information no data available Section 10. STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available Section 11. TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects Inhalation May be harmful if inhaled. May cause respiratory tract irritation. Ingestion May be harmful if swallowed. Skin May be harmful if absorbed through skin. May cause skin irritation. Eyes May cause eye irritation. Additional Information RTECS: Not available Section 12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects no data available Section 13. DISPOSAL CONSIDERATIONS Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. Section 14. TRANSPORT INFORMATION UN number ADR/RID: - IMDG: - IATA: - UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods Transport hazard class(es) ADR/RID: - IMDG: - IATA: - Packaging group ADR/RID: - IMDG: - IATA: - Environmental hazards ADR/RID: no IMDG Marine pollutant: no IATA: no Special precautions for user no data available Section 15. REGULATORY INFORMATION This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Safety, health and environmental regulations/legislation specific for the substance or mixture no data available Chemical Safety Assessment no data available Section 16. OTHER INFORMATION Further information Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use only. The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. Corporation and its Affiliates shall not be held liable for any damage resulting from handling or from contact with the above product. See and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.
Large-Scale, Protection-Free Synthesis of Se-Adenosyl-l-selenomethionine Analogues and Their Application as Cofactor Surrogates of Methyltransferases
摘要:
S-Adenosyl-L-methionine (SAM) analogues have previously demonstrated their utility as chemical reporters of methyltransferases. Here we describe the facile, large-scale synthesis of Se-alkyl Se-adenosyl-L-selenomethionine (SeAM) analogues and their precursor, Se-adenosyl-L-selenohomocysteine (SeAH). Comparison of SeAM analogues with their equivalent SAM analogues suggests that sulfonium-to- selenonium substitution can enhance their compatibility with certain protein methyltransferases, favoring otherwise less reactive SAM analogues. Ready access to SeAH therefore enables further application of SeAM analogues as chemical reporters of diverse methyltransferases.
[EN] DUAL ACTION NITRIC OXIDE DONORS AND THEIR USE AS ANTIMICROBIAL AGENTS<br/>[FR] DONNEURS D'OXYDE NITRIQUE À DOUBLE ACTION ET LEUR UTILISATION COMME AGENTS ANTIMICROBIENS
申请人:NEWSOUTH INNOVATIONS PTY LTD
公开号:WO2014071457A1
公开(公告)日:2014-05-15
The present invention relates generally to conjugates comprising a nitric oxide donor and an acyl homoserine lactone, fimbrolide, fimbrolide derivative, dihydropyrrolone or indole, and to the use of such conjugates as antimicrobial agents.
Development of a novel series of non-natural triaryl agonists and antagonists of the Pseudomonas aeruginosa LasR quorum sensing receptor
作者:Joseph N. Capilato、Shane V. Philippi、Thomas Reardon、Ashleigh McConnell、Dylan C. Oliver、Amy Warren、Jill S. Adams、Chun Wu、Lark J. Perez
DOI:10.1016/j.bmc.2016.10.021
日期:2017.1
sensing (QS), plays a central role in infection in numerous bacterial pathogens. Quorum sensing in Pseudomonas aeruginosa employs a series of small molecule receptors including the master QS regulator, LasR. In this study we investigate a non-natural triaryl series of LasR ligands using a combination of structureactivityrelationshipstudies and computational modeling. These studies have enabled the identification
The readily synthesised N,O-ditritylhomoserine (4) was used for the efficient incorporation of homoserine (1) into peptides; the derived homoserylpeptides were transformed into peptides of canaline and 1,4-diaminobutyric acid using the Mitsunobu reaction.
A novel convenient route to the naturally occurring 3-oxoacyl-L-homoserinelactones and related bacterial autoinducers
作者:Mouloud Dekhane、Kenneth T. Douglas、Peter Gilbert
DOI:10.1016/0040-4039(96)00142-6
日期:1996.3
The naturallyoccurring 3-oxohexanoyl-L-homoserinelactone (1a), a bacterial autoinducer, has been prepared in 47 % overall yield by condensing stable 3-oxohexanoic acid (2), prepared by hydrolysis from the corresponding ester (3), with L-homoserinelactone using hydroxybenzotriazole (HOBT) and dicyclohexylcarbodiimide (DCC) in non-aqueous media.