摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

二乙基碘化铝 | 2040-00-8

中文名称
二乙基碘化铝
中文别名
碘化二乙基铝
英文名称
diethylaluminum iodide
英文别名
Diaethylaluminiumjodid;Diethylaluminium-iodid;Diethyl-aluminium-jodid;AlEt2I;diethylalumanylium;iodide
二乙基碘化铝化学式
CAS
2040-00-8
化学式
C4H10AlI
mdl
——
分子量
212.009
InChiKey
PPQUYYAZSOKTQD-UHFFFAOYSA-M
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 熔点:
    -56.9°C
  • 沸点:
    157.5 °C
  • 密度:
    1.609 g/cm3(Temp: 27 °C)
  • 物理描述:
    Liquid
  • 稳定性/保质期:
    对水和空气敏感,避免接触不相容材料、火源、湿空气和水。可能会与水、酸、醇及有机卤化物发生反应。

计算性质

  • 辛醇/水分配系数(LogP):
    2.45
  • 重原子数:
    6
  • 可旋转键数:
    2
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    1.0
  • 拓扑面积:
    0
  • 氢给体数:
    0
  • 氢受体数:
    0

安全信息

  • 危险等级:
    4.2
  • 危险品标志:
    F,C-F,C
  • 安全说明:
    S16,S26,S29,S33,S36/37/39,S45
  • 危险类别码:
    R17,R14/15,R11,R34,R20
  • 海关编码:
    2931900090
  • 危险类别:
    4.2
  • 危险品运输编号:
    UN 3052
  • 储存条件:
    密封储存于阴凉、干燥的库房中,远离易燃易爆物品和水源。通常采用氮气进行保护。

SDS

SDS:4f084f50d3a0758c633bd57a861d6eb0
查看

制备方法与用途

制备方法:用于有机合成。

用途简介:

用途:用于有机合成。

反应信息

  • 作为反应物:
    描述:
    参考文献:
    名称:
    Grignard; Jenkins, Comptes Rendus Hebdomadaires des Seances de l'Academie des Sciences, 1924, vol. 179, p. 91
    摘要:
    DOI:
  • 作为产物:
    描述:
    碘乙烷氢化铝 作用下, 生成 二乙基碘化铝
    参考文献:
    名称:
    Seasonal and global NO<sub>x</sub> production by lightning estimated from the Optical Transient Detector (OTD)
    摘要:
    光学瞬态探测器(OTD)雷电数据用于估算1996年12个月期间雷电产生的NOx的季节性和全球分布。OTD传感器的视角相对较小、检测效率低以及其他困难,要求将OTD数据外推至实际的全球闪电分布。此外,已有的关于云内闪电(IC)与云对地闪电(CG)比例的测量结果被用于从OTD观测中区分IC与CG闪电的计数。得到的闪电分布随后用于计算NOx的全球和季节性生产,假设每个CG闪电产生6.2×10^25个分子的NO, 每个IC闪电产生8.7×10^24个分子。因此,我们发现虽然CG闪电数量比IC闪电少3倍或更多,但CG闪电产生的NOx却比IC闪电多。雷电产生的NOx在季节上随全球闪电分布变化,北半球在当地夏季时产生最多。NOx生产的纬度分布在热带以外展现出强烈的季节变化,主要发生在夏季半球,而在热带则全年产量较高。北半球对NOx生产的年贡献高于南半球。
    DOI:
    10.3402/tellusb.v52i5.17098
  • 作为试剂:
    描述:
    2-环己烯-1-酮乙醛二乙基碘化铝 作用下, 以 二氯甲烷甲苯 为溶剂, 反应 0.33h, 以81%的产率得到2-(1-羟基乙基)环己-2-烯-1-酮
    参考文献:
    名称:
    Aldol Reaction of Aluminium Enolate Resulting from 1,4-Addition of R2AlX to α,β-Unsaturated Carbonyl Compound. A 1-Acylethenyl Anion Equivalent
    摘要:
    有机铝试剂R2AlX(X=SPh,SeMe)能够以1,4-的方式容易地加成到α,β-不饱和羰基化合物上。生成的铝烯醇盐与醛反应,以较好至良好的产率得到醛醇加合物。通过形式上的HX消除反应,从加合物中可以得到α-取代的α,β-不饱和羰基化合物。整个转化过程相当于醛对1-酰基乙烯基负离子等价物的加成。二乙基铝碘也被发现是实现这种类型转化的有效试剂。
    DOI:
    10.1246/bcsj.54.274
点击查看最新优质反应信息

文献信息

  • Group 13 metal complexes containing the bis-(4-methylbenzoxazol-2-yl)-methanide ligand
    作者:David-R. Dauer、Melchior Flügge、Regine Herbst-Irmer、Dietmar Stalke
    DOI:10.1039/c5dt03913d
    日期:——
    methanes (NCOC6H4)2CH2 and (NCOC6H4)2CH2 derivative 1 was modified by adding a methyl group to the annulated benzene perimeters to enhance the steric protection of a potentially coordinated main group metal cation. On reaction of 1 with group 13 trimethyl reagents and dialkyl aluminium halides the ligand backbone gets deprotonated and the two endocyclic nitrogen donor atoms coordinate with the remaining
    为了关注可用于催化转化的低价主族金属络合物的高度重要性,本文研究了有前途的新配体体系(4-MeNCOC 6 H 3)2 CH 2(1)。它在众所周知的萘乙酸配体上图案化,并进一步发展为母体双杂环化合物。与先前基于双环杂环甲烷(NCOC 6 H 4)2 CH 2和(NCOC 6 H 4)2 CH 2衍生物1的研究结果进行比较通过在环苯的周长上添加甲基来修饰MgO2,以增强潜在配位的主族金属阳离子的空间保护作用。在1与13组三甲基试剂和卤代二烷基铝反应时,配体主链被去质子化,两个环内氮供体原子与剩余的有机金属片段配位,形成六元金属杂环。[Me 2 Al (4-MeNCOC 6 H 3)2 CH}](2),[Me 2 Ga (4-MeNCOC 6 H 3)2 CH}](3),[Me 2 In (4-MeNCOC 6H 3)2 CH}](4),[ClMeAl (4-MeNCOC 6 H 3)2
  • Ultrasonic irradiation in the synthesis of trimethylaluminum from methyl iodide via methylaluminum sesquiiodide
    作者:Paw-Hwa Yang、Kou-Fu Liou、Yih-Tsung Lin
    DOI:10.1016/s0022-328x(00)98951-4
    日期:1986.7
    Methyl iodide and aluminum powder were irradiated with ultrasound to form methylaluminum sesquiiodide, which was then treated with triethylaluminum to give trimethyaluminum in satisfactory yield (86%) and purity (95%).
    超声照射甲基碘和铝粉,形成倍半碘甲基铝,然后用三乙基铝处理,得到令人满意的收率(86%)和纯度(95%)的三甲基铝。
  • Ring-opened copolymers of dihydrodiclopentadiene, norbornene or
    申请人:The B. F. Goodrich Company
    公开号:US04136249A1
    公开(公告)日:1979-01-23
    1,2-Dihydrodicyclopentadiene is copolymerized by ring opening with (1) norbornene, at least one alkylnorbornene or a mixture thereof and (2) at least one acyclic monoolefin or nonconjugated acyclic olefin. The copolymers can be calendered and thermoformed, for example, to make rigid automotive goods such as glovebox covers, hubcaps, and the like.
    1,2-二氢二环戊二烯通过与(1) 双环戊烯、至少一种烷基双环戊烯或其混合物和(2) 至少一种非共轭的无环单烯或无环非共轭烯共聚开环反应。这些共聚物可以经过压延和热成型,例如制作刚性汽车用品,如手套箱盖,轮毂盖等。
  • Ring-opened alkylnorbornene copolymers
    申请人:The B. F. Goodrich Company
    公开号:US04136248A1
    公开(公告)日:1979-01-23
    At least one alkylnorbornene, wherein the alkyl group contains from 8 to 12 carbon atoms, is copolymerized by ring opening with (1) at least one acyclic monoolefin or nonconjugated acyclic olefin and (2) optionally, dicyclopentadiene. These copolymers have substantially lower glass transition temperatures than lower alkylnorbornene copolymers and can be injection molded to make appliance housings and the like, or calendered and thermoformed to make, for example, automotive goods such as glovebox covers and the like.
    至少一种烷基去氢甲基环戊烯,其中烷基含有8至12个碳原子,通过环开合与(1)至少一种无环单烯或非共轭无环烯烃和(2)可选地,二环戊二烯共聚。这些共聚物的玻璃化转变温度明显低于低烷基去氢甲基环戊烯共聚物,并可注塑成家电外壳等,或经过压延和热成型制成汽车用品,例如手套箱盖等。
  • Ring-opened iso-propylnorbornene copolymers
    申请人:The B. F. Goodrich Company
    公开号:US04136247A1
    公开(公告)日:1979-01-23
    Dimethylnorbornene, isopropylnorbornene or a mixture thereof is copolymerized by ring opening with (1) at least one acyclic monoolefin or nonconjugated acyclic olefin and (2) optionally, dicyclopentadiene. The copolymers are thermoplastics which can be calendered and thermoformed, for example, to make rigid automotive goods such as glovebox covers, hubcaps and the like.
    Dimethylnorbornene、isopropylnorbornene或其混合物通过环合开启与(1)至少一种非环状单烯或非共轭非环状烯烃和(2)可选地,二环戊二烯共聚。这些共聚物是热塑性材料,可以通过压延和热成型等方式制成刚性汽车零部件,例如手套箱盖、轮辋盖等。
查看更多