1-(2-羟乙基)吡咯 | 6719-02-4

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 吡咯
• 中文名称: 1-(2-羟乙基)吡咯
• 中文别名: 1-(2-羟基乙基)吡咯；N-(2-羟乙基)吡啶
• 英文名称: 2-(1H-pyrrol-1-yl)ethanol
• 英文别名: 1-(2-hydroxyethyl)pyrrole；N-(2-hydroxyethyl)-pyrrole；2-(pyrrol-1-yl)ethan-1-ol；2-pyrrol-1-ylethanol
• CAS: 6719-02-4
• 化学式: C₆H₉NO
• mdl: MFCD00191451
• 分子量: 111.144
• InChiKey: ZIOLCZCJJJNOEJ-UHFFFAOYSA-N

物化性质

• 沸点：
  215°C
• 密度：
  1,06 g/cm3
• 保留指数：
  1935;1934

计算性质

• 辛醇/水分配系数(LogP)：
  -0.1
• 重原子数：
  8
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.333
• 拓扑面积：
  25.2
• 氢给体数：
  1
• 氢受体数：
  1

安全信息

• 危险类别码：
  R36/37/38
• 海关编码：
  2933990090
• 安全说明：
  S26,S36/37/39
• 储存条件：
  存放于惰性气体中；避免光照和潮湿（以免发生分解）。

SDS

1-(2-Hydroxyethyl)pyrrole Revision number: 5
SAFETY DATA SHEET

---

Section 1. IDENTIFICATION
Product name: 1-(2-Hydroxyethyl)pyrrole

Revision number: 5

---

Section 2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 4
Flammable liquids
HEALTH HAZARDS
Category 2
Skin corrosion/irritation
Serious eye damage/eye irritation Category 2A
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal word Warning
Hazard statements Combustible liquid
Causes skin irritation
Causes serious eye irritation
Precautionary statements:
Keep away from flames and hot surfaces.
[Prevention]
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
[Response] IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
[Storage] Store in a well-ventilated place. Keep cool.
[Disposal] Dispose of contents/container through a waste management company authorized by
the local government.

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture: Substance
Components: 1-(2-Hydroxyethyl)pyrrole
Percent: >99.0%(GC)
6719-02-4
CAS Number:
Chemical Formula: C6H9NO
1-(2-Hydroxyethyl)pyrrole

---

Section 4. FIRST AID MEASURES
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Get medical advice/attention if you feel unwell.
Skin contact: Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion: Get medical advice/attention if you feel unwell. Rinse mouth.
Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

---

Section 5. FIRE-FIGHTING MEASURES
Suitable extinguishing Dry chemical, foam, water spray, carbon dioxide.
media:
Unsuitable extinguishing Solid streams of water
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical: generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
When extinguishing fire, be sure to wear personal protective equipment.
Special protective
equipment for firefighters:

---

Section 6. ACCIDENTAL RELEASE MEASURES
Use personal protective equipment. Keep people away from and upwind of spill/leak.
Personal precautions,
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards: case of a fire. Use spark-proof tools and explosion-proof equipment.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures: Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapour or mist. Keep away from flames and hot surfaces. Take
measures to prevent the build up of electrostatic charge. Use explosion-proof
equipment. Wash hands and face thoroughly after handling.
Use a closed system, ventilation.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Storage conditions:
Store under inert gas.
Protect from moisture.
Store away from incompatible materials such as oxidizing agents.
Light-sensitive, Moisture-sensitive
Packaging material: Comply with laws.
1-(2-Hydroxyethyl)pyrrole

---

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Install a closed system or local exhaust as possible so that workers should not be
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection: Protective gloves.
Safety glasses. A face-shield, if the situation requires.
Eye protection:
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C): Liquid
Clear
Form:
Colour: Colorless - Reddish yellow
No data available
Odour:
pH: No data available
Melting point/freezing point:No data available
Boiling point/range: 215°C
Flash point: No data available
Flammability or explosive
limits:
Lower: No data available
Upper: No data available
Relative density: 1.06
Solubility(ies):
[Water] No data available
No data available
[Other solvents]

---

Section 10. STABILITY AND REACTIVITY
Chemical stability: Stable under proper conditions.
Possibility of hazardous No special reactivity has been reported.
reactions:
Conditions to avoid: Open flame
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
products:

---

Section 11. TOXICOLOGICAL INFORMATION
Acute Toxicity: No data available
Skin corrosion/irritation: No data available
Serious eye No data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC = No data available
No data available
NTP =
Reproductive toxicity: No data available

---

Section 12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: No data available
Crustacea: No data available
Algae: No data available
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobility in soil
Log Pow: No data available
1-(2-Hydroxyethyl)pyrrole

---

Section 12. ECOLOGICAL INFORMATION
Soil adsorption (Koc): No data available
Henry's Law No data available
constant(PaM3/mol):

---

Section 13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

---

Section 14. TRANSPORT INFORMATION
Does not correspond to the classification standard of the United Nations
Hazards Class:
UN-No: Not listed

---

Section 15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-(2-羟乙基)吡咯 在 吡啶 、 盐酸 、 乙酸酐 作用下， 以 吡啶 、 二氯甲烷 为溶剂， 反应 42.0h， 生成 1-(2-acetoxyethyl)-2-ethoxalyl-4-methoxymethylpyrrole
  参考文献：
  名称：

  1,2-二氢-3H-吡咯并[1,2-a]吡咯-1-羧酸及其同源吡啶和吖庚因类似物的合成

  摘要：

  已经设计了多种先前未知的 1,2-二氢-3H-吡咯并[1,2-a]吡咯-1-羧酸及其各种 5-和 6-取代衍生物的合成方法。其中一些过程已经扩展到迄今为止未报道的 5,6,7,8-四氢吡咯并[1,2-a]吡啶-8-羧酸和5,6,7,8-四氢-9H-吡咯并[1, 2-a]氮杂-9-羧酸衍生物。开发了两种将吡咯转化为相应吡咯-2-乙酸酯的新工艺。这两种方法都基于使用容易获得的乙二酰吡咯衍生物作为起始材料。一个序列涉及α-酮酯的皂化，然后是粗α-酮酸盐的Wolff-Kishner 还原和随后由此产生的乙酸衍生物的酯化。

  DOI：

  10.1139/v82-328
• 作为产物：
  描述：

  methyl 2-(1-pyrrolyl)acetate 在 lithium aluminium tetrahydride 作用下， 生成 1-(2-羟乙基)吡咯
  参考文献：
  名称：

  Kashima, Choji; Maruyama, Tatsuya; Fujioka, Yoko, Journal of the Chemical Society. Perkin transactions I, 1989, p. 1041 - 1046

  摘要：

  DOI：

文献信息

• Indol-3-ylcycloalkyl Ketones: Effects of N1 Substituted Indole Side Chain Variations on CB₂ Cannabinoid Receptor Activity
  作者：Jennifer M. Frost、Michael J. Dart、Karin R. Tietje、Tiffany R. Garrison、George K. Grayson、Anthony V. Daza、Odile F. El-Kouhen、Betty B. Yao、Gin C. Hsieh、Madhavi Pai、Chang Z. Zhu、Prasant Chandran、Michael D. Meyer

  DOI：10.1021/jm901214q

  日期：2010.1.14

  affinity CB2 agonists (5, 16). Substitution at the N1-indole position was then examined. A series of aminoalkylindoles was prepared and several substituted aminoethyl derivatives were active (23−27, 5) at the CB2 receptor. A study of N1 nonaromatic side chain variants provided potent agonists at the CB2 receptor (16, 35−41, 44−47, 49−54, and 57−58). Several polar side chains (alcohols, oxazolidinone) were

  已经制备了几种对CB 2大麻素受体具有高亲和力并且对CB 1受体具有选择性的3-酰基环吲哚。各种3-酰基取代基进行了调查，和四甲基环组被发现导致高亲和力CB 2激动剂（5，16）。然后检查在N1-吲哚位置的取代。（A系列aminoalkylindoles的制备和几个取代氨基乙基衍生物是活性23 - 27，5在CB）2受体。N1非芳香族侧链变异体的研究为CB 2受体提供了有效的激动剂（16，35 - 41，44 - 47，49 - 54，和57 - 58）。几个极性侧链（醇类，恶唑烷酮）的良好的耐受性为CB 2受体的活性（41，50），而其他（酰胺，酸）导致较弱的或无活性的化合物（55和56）。N1芳香族侧链还提供几个高亲和力CB 2受体激动剂（61，63，65，和69），但是在体外CB一般不太有效的2个功能测定法均高于非芳香族侧链类似物。
• Novel piperazine derivatives
  申请人：——

  公开号：US20020143020A1

  公开（公告）日：2002-10-03

  The present invention is a chemical compound of formula (I) 1 or a pharmaceutically acceptable salts, solvates and esters thereof, wherein R 1 to R 4 , A 1 , A 2 m and n are as described in the specification.

  本发明是一种具有公式(I)的化学化合物 1 或其药物可接受的盐、溶剂化物和酯，其中R 1 至R 4 ，A 1 ，A 2 ，m和n如说明书中所述。
• METHOD OF IMPROVING STABILITY OF SWEET ENHANCER AND COMPOSITION CONTAINING STABILIZED SWEET ENHANCER
  申请人：TACHDJIAN Catherine

  公开号：US20120041078A1

  公开（公告）日：2012-02-16

  The present invention includes methods of stabilizing one or more sweet enhancers when they are exposed to a light source as well as liquid compositions containing one or more sweet enhancers and one or more photostabilizers.

  本发明包括在甜味增强剂暴露于光源时稳定一个或多个甜味增强剂的方法，以及包含一个或多个甜味增强剂和一个或多个光稳定剂的液体组合物。
• [EN] ETHYNE DERIVATIVES, PHARMACEUTICAL COMPOSITIONS AND USES THEREOF<br/>[FR] DÉRIVÉS D'ÉTHYNE, COMPOSITIONS PHARMACEUTIQUES ET LEURS UTILISATIONS
  申请人：BOEHRINGER INGELHEIM INT

  公开号：WO2012032014A1

  公开（公告）日：2012-03-15

  invention relates to new compounds of the formula I to their use as medicaments, to methods for their therapeutic use and to pharmaceutical compositions containing them.

  这项发明涉及公式I的新化合物，涉及它们作为药物的用途，涉及它们的治疗用途的方法，以及含有它们的药物组合物。
• New compounds, pharmaceutical compositions and uses thereof
  申请人：ROTH Gerald Juergen

  公开号：US20120214782A1

  公开（公告）日：2012-08-23

  The invention relates to new compounds of the formula I to their use as medicaments, to methods for their therapeutic use and to pharmaceutical compositions containing them.

  这项发明涉及公式I的新化合物，以及它们作为药物的用途，它们的治疗用途的方法，以及含有它们的药物组合物。