2-(2-Methoxyethyl)pyridine   Revision number: 5  
  SAFETY DATA SHEET  
 
  Section 1. IDENTIFICATION  
  Product name:  2-(2-Methoxyethyl)pyridine 
 
  Revision number:  5 
 
  Section 2. HAZARDS IDENTIFICATION  
  GHS classification  
  PHYSICAL HAZARDS  
 Category 4 
  Flammable liquids  
  HEALTH HAZARDS  
 Category 5 
  Acute toxicity (Oral)  
  ENVIRONMENTAL HAZARDS  Not classified 
  GHS label elements, including precautionary statements  
  Pictograms or hazard symbols  None 
 Warning 
  Signal word  
  Hazard statements  Combustible liquid 
 May be harmful if swallowed 
  Precautionary statements:  
 Keep away from flames and hot surfaces. 
  [Prevention]  
 Wear protective gloves and eye/face protection. 
  [Response]  Call a POISON CENTER or doctor/physician if you feel unwell. 
  [Storage]  Store in a well-ventilated place. Keep cool. 
  [Disposal]  Dispose of contents/container through a waste management company authorized by 
 the local government. 
 
  Section 3. COMPOSITION/INFORMATION ON INGREDIENTS  
  Substance/mixture:  Substance 
 2-(2-Methoxyethyl)pyridine 
  Components:  
  Percent:  >97.0%(GC) 
 114-91-0 
  CAS Number:  
  Chemical Formula:  C8H11NO 
 
  Section 4. FIRST AID MEASURES  
  Inhalation:  Remove victim to fresh air and keep at rest in a position comfortable for breathing. 
 Call a POISON CENTER or doctor/physician if you feel unwell. 
  Skin contact:  Remove/Take off immediately all contaminated clothing. Gently wash with plenty of 
 soap and water. If skin irritation or rash occurs: Get medical advice/attention. 
  Eye contact:  Rinse cautiously with water for several minutes. Remove contact lenses, if present 
 and easy to do. Continue rinsing. If eye irritation persists: Get medical 
 advice/attention. 
 Call a POISON CENTER or doctor/physician if you feel unwell. Rinse mouth. 
  Ingestion:  
  Protection of first-aiders:  A rescuer should wear personal protective equipment, such as rubber gloves and air- 
 tight goggles. 
  2-(2-Methoxyethyl)pyridine  
 
  Section 5. FIRE-FIGHTING MEASURES  
  Suitable extinguishing  Dry chemical, foam, water spray, carbon dioxide. 
  media:  
  Unsuitable extinguishing Solid streams of water  
  media:  
  Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to  
  from the chemical:  generate poisonous fume. 
  Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing  
 method according to the surrounding situation is used. Uninvolved persons should 
 evacuate to a safe place. In case of fire in the surroundings: Remove movable 
 containers if safe to do so. 
  Special protective  When extinguishing fire, be sure to wear personal protective equipment. 
  equipment for firefighters:  
 
  Section 6. ACCIDENTAL RELEASE MEASURES  
  Personal precautions,  Use personal protective equipment. Keep people away from and upwind of spill/leak. 
  protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled  
  emergency procedures: around the leakage area by roping off, etc.  
  Environmental precautions: Prevent product from entering drains.  
  Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).  
  containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected  
  up: material should be promptly disposed of, in accordance with appropriate laws and  
 regulations. 
  Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in  
  hazards:  case of a fire. Use spark-proof tools and explosion-proof equipment. 
 
  Section 7. HANDLING AND STORAGE  
  Precautions for safe handling  
  Technical measures:  Handling is performed in a well ventilated place. Wear suitable protective equipment. 
 Prevent generation of vapour or mist. Keep away from flames and hot surfaces. Take 
 measures to prevent the build up of electrostatic charge. Use explosion-proof 
 equipment. Wash hands and face thoroughly after handling. 
 Use a closed system, ventilation. 
  Advice on safe handling: Avoid contact with skin, eyes and clothing.  
  Conditions for safe storage, including any  
  incompatibilities  
  Storage conditions:  Keep container tightly closed. Store in a cool, dark and well-ventilated place. 
 Store away from incompatible materials such as oxidizing agents. 
  Packaging material:  Comply with laws. 
 
  Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION  
  Engineering controls:  Install a closed system or local exhaust as possible so that workers should not be 
 exposed directly. Also install safety shower and eye bath. 
  Personal protective equipment  
  Respiratory protection: Vapor respirator. Follow local and national regulations.  
 Protective gloves. 
  Hand protection:  
  Eye protection:  Safety glasses. A face-shield, if the situation requires. 
  Skin and body protection: Protective clothing. Protective boots, if the situation requires.  
 
  Section 9. PHYSICAL AND CHEMICAL PROPERTIES  
  Physical state (20°C):  Liquid 
  Form:  Clear 
 Colorless - Reddish yellow 
  Colour:  
  Odour:  No data available 
  pH: No data available  
  Melting point/freezing point:No data available  
  Boiling point/range:  96°C/2.3kPa 
  2-(2-Methoxyethyl)pyridine  
 
  Section 9. PHYSICAL AND CHEMICAL PROPERTIES  
  Flash point:  No data available 
  Flammability or explosive  
  limits:  
  Lower:  No data available 
  Upper:  No data available 
  Relative density:  1.01 
  Solubility(ies):  
 No data available 
  [Water]  
  [Other solvents]  No data available 
 
  Section 10. STABILITY AND REACTIVITY  
  Chemical stability:  Stable under proper conditions. 
  Possibility of hazardous No special reactivity has been reported.  
  reactions:  
  Conditions to avoid:  Open flame 
  Incompatible materials: Oxidizing agents  
  Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)  
  products:  
 
  Section 11. TOXICOLOGICAL INFORMATION  
 No data available 
  Acute Toxicity:  
  Skin corrosion/irritation: No data available  
  Serious eye  No data available 
  damage/irritation:  
  Germ cell mutagenicity: No data available  
  Carcinogenicity:  
 No data available 
  IARC =  
  NTP =  No data available 
 No data available 
  Reproductive toxicity:  
 
  Section 12. ECOLOGICAL INFORMATION  
  Ecotoxicity:  
  Fish:  No data available 
  Crustacea:  No data available 
  Algae:  No data available 
  Persistence / degradability: No data available  
  Bioaccumulative  No data available 
  potential(BCF):  
  Mobility in soil  
  Log Pow:  No data available 
  Soil adsorption (Koc):  No data available 
  Henry's Law  No data available 
  constant(PaM3/mol):  
 
  Section 13. DISPOSAL CONSIDERATIONS  
 Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical 
 incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when 
 disposing of the substance. 
 
  Section 14. TRANSPORT INFORMATION  
  Hazards Class:  Does not correspond to the classification standard of the United Nations 
  UN-No:  Not listed 
  2-(2-Methoxyethyl)pyridine  
 
  Section 15. REGULATORY INFORMATION  
  Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002  
  and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,  
 loading and unloading were prescribed. 
 
 
  SECTION 16 - ADDITIONAL INFORMATION  
 N/A