摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

3-butyl 4-methylthiazolium bromide | 97745-75-0

中文名称
——
中文别名
——
英文名称
3-butyl 4-methylthiazolium bromide
英文别名
3-Butyl-4-methyl-1,3-thiazol-3-ium bromide;3-butyl-4-methyl-1,3-thiazol-3-ium;bromide
3-butyl 4-methylthiazolium bromide化学式
CAS
97745-75-0
化学式
Br*C8H14NS
mdl
——
分子量
236.176
InChiKey
WRPRSOSWIVAYPR-UHFFFAOYSA-M
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    -0.85
  • 重原子数:
    11
  • 可旋转键数:
    3
  • 环数:
    1.0
  • sp3杂化的碳原子比例:
    0.62
  • 拓扑面积:
    32.1
  • 氢给体数:
    0
  • 氢受体数:
    2

SDS

SDS:d2fee42c78c09f084693f63338a23d70
查看

反应信息

  • 作为反应物:
    描述:
    3-butyl 4-methylthiazolium bromide氟硼酸钠 作用下, 以 甲醇 为溶剂, 生成 3-butyl-4-methylthiazol-3-ium tetrafluoroborate
    参考文献:
    名称:
    Thiazolium-ion based organic ionic liquids (OILs).1,2 Novel OILs which promote the benzoin condensation
    摘要:
    4- and 5-methyl thiazole are readily alkylated with n-butyl bromide followed by anion exchange of Br- for BF4- to give mobile, room-temperature ionic liquids. These liquids, when treated with small quantities of triethylamine, serve to promote the benzoin condensation of benzaldehyde. (C) 1999 Elsevier Science Ltd. All rights reserved.
    DOI:
    10.1016/s0040-4039(99)00025-8
  • 作为产物:
    描述:
    4-甲基噻唑正溴丁烷 反应 56.0h, 以86%的产率得到3-butyl 4-methylthiazolium bromide
    参考文献:
    名称:
    使用离子液体作为结构剂调整 GeS2Hybrid 材料的形态
    摘要:
    控制高度极化的硫属化物材料的表面化学和形态是一个非常有趣的挑战,因为它可能会导致电化学、催化和气相分离等各个领域的突破。考虑到这一点,研究了一种合成结构化 Ge 基硫属化物产品的新方法。它涉及使用四乙氧基锗 (TEOG) 和硫代乙酰胺以及离子液体 (IL) 作为结构剂。这种创新的合成工艺有两个主要优点:它在软条件下进行,并且还可以对获得的混合有机-GeS2 颗粒进行形态控制。在没有 IL 的情况下,合成导致纳米球团聚,而离子液体的引入导致微球或石膏玫瑰花状颗粒。已经清楚地强调,混合有机-GeS2 颗粒的形态在很大程度上取决于 IL 阳离子部分的性质。
    DOI:
    10.1002/ejic.201402762
点击查看最新优质反应信息

文献信息

  • Heteroatom-Containing Porous Carbons Derived from Ionic Liquid-Doped Alkali Organic Salts for Supercapacitors
    作者:Jingyue Zhu、Dan Xu、Wenjing Qian、Jinyu Zhang、Feng Yan
    DOI:10.1002/smll.201600010
    日期:2016.4
    not only incorporates the heteroatoms into the carbon frameworks but also highly improves the carbonization yield, as compared with that of either alkali organic salts or ILs as precursors. The porous structure of CMs can be tuned by adjusting the feed ratio of ILs. The porous CMs derived from 1‐butyl‐3‐methylimidazolium chlorine‐doped sodium glutamate exhibit high charge storage capacity with a specific
    通过使用掺杂离子液体(IL)的碱属有机盐作为小分子前体,开发了一种杂原子掺杂的多孔碳材料(CMs)合成的简单策略。用含IL的杂原子(包括1-丁基-3-甲基咪唑和3-丁基-4-甲基噻唑化)掺杂碱性有机盐(如谷氨酸钠酒石酸钠柠檬酸)不仅将杂原子掺入碳骨架中与碱属有机盐或ILs的前驱体相比,它还能大大提高碳化率。可以通过调节IL的进料比来调整CM的多孔结构。源自1-丁基-3-甲基咪唑掺杂的谷氨酸钠的多孔CM具有高电荷存储容量,比电容为287 F g -1超级电容器的电流密度为1 A g -1时,在6 m KOH中的5000个循环中具有良好的稳定性。该策略为合成杂原子掺杂的多孔CM开辟了一种简单有效的方法。
  • Facile Synthesis of Highly Substituted 3-Aminofurans from Thiazolium Salts, Aldehydes, and Dimethyl Acetylenedicarboxylate
    作者:Cheng Ma、Hanfeng Ding、Guangming Wu、Yewei Yang
    DOI:10.1021/jo051513x
    日期:2005.10.1
    A facile preparation of 3-aminofuran derivatives via multicomponent reactions of thiazole carbenes, aldehydes, and dimethyl acetylenedicarboxylate (DMAD) is reported. In this process, the thiazole carbenes, generated in situ from thiazolium salts, reacted with aldehydes and DMAD at −78 to 0 °C in CH2Cl2 to afford the substituted furans in moderate to good yields. Eight substituted thiazolium salts
    据报道,通过噻唑卡宾,醛和乙炔羧酸二甲酯(DMAD)的多组分反应可轻松制备3-呋喃生物。在此过程中,由噻唑鎓盐原位生成的噻唑羧化物在-78至0°C下于CH 2 Cl 2中与醛和DMAD反应,以中等至良好的产率提供取代的呋喃。在反应中使用八种取代的噻唑鎓盐作为卡宾前体。除了芳基醛以外,还研究了α , β-不饱和醛,脂肪族醛和烯丙基,并适用于该反应。
  • Concise Assembly of Highly Substituted Furan-Fused 1,4-Thiazepines and Their Diels−Alder Reactions with Benzynes
    作者:Hanfeng Ding、Yiping Zhang、Ming Bian、Weijun Yao、Cheng Ma
    DOI:10.1021/jo702299m
    日期:2008.1.1
    A facile and highly efficient three-component reaction of thiazole or benzothiazole carbenes, disubstituted ketenes, and activated alkynes is disclosed. With this methodology, a polysubstituted ring system containing furo[2,3-c]thiazepine core can be constructed from simple and readily accessible starting materials in good yields. The scope and limitation of this transformation were investigated in detail by using various thiazole carbene, ketene, and alkyne components. Furthermore, the synthetic utilities of these unique polyheterocyclic compounds were demonstrated via their Diels-Alder reactions with benzynes to furnish thiazepine-fused 7-oxanorbornadiene derivatives in excellent yields.
  • A Ring-Expansion Methodology Involving Multicomponent Reactions: Highly Efficient Access to Polysubstituted Furan-Fused 1,4-Thiazepine Derivatives
    作者:Cheng Ma、Hanfeng Ding、Yiping Zhang、Ming Bian
    DOI:10.1002/anie.200602836
    日期:2006.11.27
查看更多