摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

Z-His-Phe-OMe | 4491-15-0

中文名称
——
中文别名
——
英文名称
Z-His-Phe-OMe
英文别名
N-(Nα-benzyloxycarbonyl-L-histidyl)-L-phenylalanine-methyl ester;N-(Nα-Benzyloxycarbonyl-L-histidyl)-L-phenylalanin-methylester;L-Phenylalanine, N-[N-[(phenylmethoxy)carbonyl]-L-histidyl]-, methyl ester;methyl (2S)-2-[[(2S)-3-(1H-imidazol-5-yl)-2-(phenylmethoxycarbonylamino)propanoyl]amino]-3-phenylpropanoate
Z-His-Phe-OMe化学式
CAS
4491-15-0
化学式
C24H26N4O5
mdl
——
分子量
450.494
InChiKey
YNLHSCNDKQVZDZ-SFTDATJTSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    763.4±60.0 °C(Predicted)
  • 密度:
    1.275±0.06 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    2.9
  • 重原子数:
    33
  • 可旋转键数:
    12
  • 环数:
    3.0
  • sp3杂化的碳原子比例:
    0.25
  • 拓扑面积:
    122
  • 氢给体数:
    3
  • 氢受体数:
    6

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    参考文献:
    名称:
    Understanding nanoindentation unloading curves
    摘要:
    实验表明,使用伯克维奇三角锥形压头获得的纳米压痕卸载曲线通常可以用幂律关系 P = α(h - hf)m 很好地描述,其中 hf 是完全卸载后的最终深度,α 和 m 是材料常数。然而,幂律指数并不像锥形压头(m = 2)或扁圆冲头(m = 1)的弹性接触那样固定为一个整数值,而是在 m = 1.2-1.6 的范围内因材料而异。根据对刚性锥体压入弹塑性材料的有限元模拟观察,建立了一个简单的模型,为这种行为提供了物理解释。该模型基于一个具有 "有效形状 "的压头的概念,其几何形状由压入过程中形成的塑性硬度印痕的形状决定。通过该模型,可以将幂律关系中的材料常数与弹性模量和硬度等更基本的材料特性联系起来。本文提出了一些简单的论点,根据这些论点,可以从压头下的压力分布推导出有效压头形状。
    DOI:
    10.1557/jmr.2002.0386
  • 作为产物:
    参考文献:
    名称:
    Understanding nanoindentation unloading curves
    摘要:
    实验表明,使用伯克维奇三角锥形压头获得的纳米压痕卸载曲线通常可以用幂律关系 P = α(h - hf)m 很好地描述,其中 hf 是完全卸载后的最终深度,α 和 m 是材料常数。然而,幂律指数并不像锥形压头(m = 2)或扁圆冲头(m = 1)的弹性接触那样固定为一个整数值,而是在 m = 1.2-1.6 的范围内因材料而异。根据对刚性锥体压入弹塑性材料的有限元模拟观察,建立了一个简单的模型,为这种行为提供了物理解释。该模型基于一个具有 "有效形状 "的压头的概念,其几何形状由压入过程中形成的塑性硬度印痕的形状决定。通过该模型,可以将幂律关系中的材料常数与弹性模量和硬度等更基本的材料特性联系起来。本文提出了一些简单的论点,根据这些论点,可以从压头下的压力分布推导出有效压头形状。
    DOI:
    10.1557/jmr.2002.0386
点击查看最新优质反应信息

文献信息

  • Amino acids and peptides. XII. Synthesis of C-terminal decapeptide of bovine pancreatic ribonuclease A(RNase A) and its analogs and determination of their ability to reactivate des(121-124)RNase A.
    作者:YOSHIO OKADA、NAOKI TENO、JUNKO MIYAO、YUMIKO MORI、MASACHIKA IRIE
    DOI:10.1248/cpb.32.4585
    日期:——
    A decapeptide corresponding to the C-terminal sequence (residues 115-124) of bovine pancreatic ribonuclease A (RNase A) and four analogs in which Asp-121 is replaced by Asn, Glu, Gln and Ala were synthesized by the fragment condensation procedure, and their abilities to reactivate RNase A from which the last 4 residues, Asp-Ala-Ser-Val, had been removed were examined. Asp-decapeptide (I) and Glu-decapeptide (III) bound with inactivated RNase 1-120 non-covalently and exhibited hydrolytic activity towards cyclic 2', 3'-cytidylic acid. In contrast, Asn-decapeptide (II), Gln-decapeptide (IV) and Ala-decapeptide (V) did not show any ability to restore the activity of RNase A 1-120. Our systematic syntheses of the C-terminal decapeptide of RNase A and its analogs indicate a very important role of the free carboxyl group at position 121 of RNase A for manifestation of RNase activity.
    合成了一种与牛胰腺核糖核酸酶A(RNase A)C端序列(残基115-124)相对应的十肽,以及四种其类似物,其中天冬酸-121被天冬酰胺、谷氨酸、谷氨酰胺和丙氨酸替代,并通过片段缩合程序合成了这些肽。研究了这些肽恢复从中去除了最后4个残基(天冬酸-丙氨酸-丝氨酸-缬氨酸)的RNase A的能力。天冬氨酸十肽(I)和谷氨酸十肽(III)以非共价方式与失活的RNase 1-120结合,并表现出对环状2', 3'-胞苷酸的水解活性。相比之下,天冬酰胺十肽(II)、谷氨酰胺十肽(IV)和丙氨酸十肽(V)没有显示出恢复RNase A 1-120活性的能力。我们系统合成的RNase A C端十肽及其类似物表明,第121位自由羧基在RNase活性的表现中扮演了非常重要的角色。
  • Synth�se de laL-histidyl-L-ph�nylalanyl-L-arginyl-L-tryptophanyl-glycyl-?-CBO-L-lysyl-L-prolyl-L-valylamide
    作者:R. A. Boissonnas、St. Guttmann、R. L. Huguenin、P.-A. Jaquenoud、Ed. Sandrin
    DOI:10.1002/hlca.19580410641
    日期:——
    AbstractTrityl‐glycyl‐ϵ‐CBO‐L‐lysine is condensed with L‐prolyl‐L‐valine methyl ester and, after amidification and splitting of the trityl group, glycyl‐ϵ‐CBO‐L‐lysyl‐L‐prolyl‐L‐valylamide is obtained. This is condensed with ditrityl‐L‐histidyl‐L‐phenylalanyl‐L‐arginyl‐L‐tryptophane prepared by condensation of ditrityl‐L‐histidyl‐L‐phenylalanine with L‐arginyl‐L‐tryptophane methyl ester and saponification. Dicyclohexyl‐carbodiimide is used as a condensing agent. After splitting off the trityl groups, the final octapeptide, L‐histidyl‐L‐phenylalanyl‐L‐arginyl‐L‐tryptophanyl‐glycyl‐ϵ‐CBO‐L‐lysyl‐L‐prolyl‐L‐valylamide is shown to be optically pure by leucine‐aminopeptidase digestion.
  • Davis, Journal of Biological Chemistry, 1956, vol. 223, p. 935,945
    作者:Davis
    DOI:——
    日期:——
  • Understanding nanoindentation unloading curves
    作者:G. M. Pharr、A. Bolshakov
    DOI:10.1557/jmr.2002.0386
    日期:2002.10

    Experiments have shown that nanoindentation unloading curves obtained with Berkovich triangular pyramidal indenters are usually welldescribed by the power-law relation P = α(hhf)m, where hf is the final depth after complete unloading and α and m are material constants. However, the power-law exponent is not fixed at an integral value, as would be the case for elastic contact by a conical indenter (m = 2) or a flat circular punch (m = 1), but varies from material to material in the range m = 1.2–1.6. A simple model is developed based on observations from finite element simulations of indentation of elastic–plastic materials by a rigid cone that provides a physical explanation for the behavior. The model, which is based on the concept of an indenter with an “effective shape” whose geometry is determined by the shape of the plastic hardness impression formed during indentation, provides a means by which the material constants in the power law relation can be related to more fundamental material properties such as the elastic modulus and hardness. Simple arguments are presented from which the effective indenter shape can be derived from the pressure distribution under the indenter.

    实验表明,使用伯克维奇三角锥形压头获得的纳米压痕卸载曲线通常可以用幂律关系 P = α(h - hf)m 很好地描述,其中 hf 是完全卸载后的最终深度,α 和 m 是材料常数。然而,幂律指数并不像锥形压头(m = 2)或扁圆冲头(m = 1)的弹性接触那样固定为一个整数值,而是在 m = 1.2-1.6 的范围内因材料而异。根据对刚性锥体压入弹塑性材料的有限元模拟观察,建立了一个简单的模型,为这种行为提供了物理解释。该模型基于一个具有 "有效形状 "的压头的概念,其几何形状由压入过程中形成的塑性硬度印痕的形状决定。通过该模型,可以将幂律关系中的材料常数与弹性模量和硬度等更基本的材料特性联系起来。本文提出了一些简单的论点,根据这些论点,可以从压头下的压力分布推导出有效压头形状。
查看更多

同类化合物

(甲基3-(二甲基氨基)-2-苯基-2H-azirene-2-羧酸乙酯) (±)-盐酸氯吡格雷 (±)-丙酰肉碱氯化物 (d(CH2)51,Tyr(Me)2,Arg8)-血管加压素 (S)-(+)-α-氨基-4-羧基-2-甲基苯乙酸 (S)-阿拉考特盐酸盐 (S)-赖诺普利-d5钠 (S)-2-氨基-5-氧代己酸,氢溴酸盐 (S)-2-[3-[(1R,2R)-2-(二丙基氨基)环己基]硫脲基]-N-异丙基-3,3-二甲基丁酰胺 (S)-1-(4-氨基氧基乙酰胺基苄基)乙二胺四乙酸 (S)-1-[N-[3-苯基-1-[(苯基甲氧基)羰基]丙基]-L-丙氨酰基]-L-脯氨酸 (R)-乙基N-甲酰基-N-(1-苯乙基)甘氨酸 (R)-丙酰肉碱-d3氯化物 (R)-4-N-Cbz-哌嗪-2-甲酸甲酯 (R)-3-氨基-2-苄基丙酸盐酸盐 (R)-1-(3-溴-2-甲基-1-氧丙基)-L-脯氨酸 (N-[(苄氧基)羰基]丙氨酰-N〜5〜-(diaminomethylidene)鸟氨酸) (6-氯-2-吲哚基甲基)乙酰氨基丙二酸二乙酯 (4R)-N-亚硝基噻唑烷-4-羧酸 (3R)-1-噻-4-氮杂螺[4.4]壬烷-3-羧酸 (3-硝基-1H-1,2,4-三唑-1-基)乙酸乙酯 (2S,3S,5S)-2-氨基-3-羟基-1,6-二苯己烷-5-N-氨基甲酰基-L-缬氨酸 (2S,3S)-3-((S)-1-((1-(4-氟苯基)-1H-1,2,3-三唑-4-基)-甲基氨基)-1-氧-3-(噻唑-4-基)丙-2-基氨基甲酰基)-环氧乙烷-2-羧酸 (2S)-2,6-二氨基-N-[4-(5-氟-1,3-苯并噻唑-2-基)-2-甲基苯基]己酰胺二盐酸盐 (2S)-2-氨基-3-甲基-N-2-吡啶基丁酰胺 (2S)-2-氨基-3,3-二甲基-N-(苯基甲基)丁酰胺, (2S,4R)-1-((S)-2-氨基-3,3-二甲基丁酰基)-4-羟基-N-(4-(4-甲基噻唑-5-基)苄基)吡咯烷-2-甲酰胺盐酸盐 (2R,3'S)苯那普利叔丁基酯d5 (2R)-2-氨基-3,3-二甲基-N-(苯甲基)丁酰胺 (2-氯丙烯基)草酰氯 (1S,3S,5S)-2-Boc-2-氮杂双环[3.1.0]己烷-3-羧酸 (1R,4R,5S,6R)-4-氨基-2-氧杂双环[3.1.0]己烷-4,6-二羧酸 齐特巴坦 齐德巴坦钠盐 齐墩果-12-烯-28-酸,2,3-二羟基-,苯基甲基酯,(2a,3a)- 齐墩果-12-烯-28-酸,2,3-二羟基-,羧基甲基酯,(2a,3b)-(9CI) 黄酮-8-乙酸二甲氨基乙基酯 黄荧菌素 黄体生成激素释放激素 (1-5) 酰肼 黄体瑞林 麦醇溶蛋白 麦角硫因 麦芽聚糖六乙酸酯 麦根酸 麦撒奎 鹅膏氨酸 鹅膏氨酸 鸦胆子酸A甲酯 鸦胆子酸A 鸟氨酸缩合物