Material Safety Data Sheet Section 1. Identification of the substance Product Name: 7-Fluoro-3-(hydroxyimino)indolin-2-one Synonyms: 7-Fluoro-3-oxime-1H-indole-2,3-dione Section 2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. Section 3. Composition/information on ingredients. Ingredient name: 7-Fluoro-3-(hydroxyimino)indolin-2-one CAS number: 143884-84-8 Section 4. First aid measures Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section 5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section 6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution: Wear approved mask/respirator Hand precaution: Wear suitable gloves/gauntlets Skin protection: Wear suitable protective clothing Eye protection: Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section 7. Handling and storage Handling: This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels. Storage: Section 8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section 9. Physical and chemical properties Appearance: Not specified Boiling point: No data No data Melting point: Flash point: No data Density: No data Molecular formula: C8H5FN2O2 Molecular weight: 180.1 Section 10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen fluoride. Section 11. Toxicological information No data. Section 12. Ecological information No data. Section 13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section 14. Transportation information Non-harzardous for air and ground transportation. Section 15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313.
Copper-Catalyzed Carbonyl Group Controlled Coupling of Isatin Oximes with Arylboronic Acids To Prepare <i>N</i>
-Aryloxindole Nitrones
作者:Xue-Ling Mo、Chun-Hua Chen、Cui Liang、Dong-Liang Mo
DOI:10.1002/ejoc.201701324
日期:2018.1.17
prepared in good to excellent yields by copper-catalyzed coupling of N-unprotected isatin oximes with aryl boronic acids under mild reaction conditions. The reaction was tolerant various arylboronicacids with diverse sensitive functionalgroups. Detailed studies showed that the carbonyl group in isatin oximes might be served as a carbonyl ligand or a controlled group playing important roles in the formation
Copper-Catalyzed Selective <i>N</i>-Vinylation of 3-(Hydroxyimino)indolin-2-ones with Alkenyl Boronic Acids: Synthesis of <i>N</i>-Vinyl Nitrones and Spirooxindoles
作者:Chun-Hua Chen、Qing-Qing Liu、Xiao-Pan Ma、Yu Feng、Cui Liang、Cheng-Xue Pan、Gui-Fa Su、Dong-Liang Mo
DOI:10.1021/acs.joc.7b00620
日期:2017.6.16
A copper-catalyzed selective cross-coupling reaction of 3-(hydroxyimino)indolin-2-ones with alkenylboronicacids to access (E)-N-vinyl oxindole nitrones has been achieved under mild conditions. The studies showed that catalytic copper salt selectively gave mono N-vinylation products, while 2.0 equiv of copper salt provided double N-vinylation products. The control experiments revealed that the carbonyl
Synthesis of Isatin 3-Oximes from 2-Nitroacetanilides
作者:Timothy Kearney、Philip A. Harris、Arthur Jackson、John A. Joule
DOI:10.1055/s-1992-26223
日期:——
2-Nitroacetanilides, prepared by alkaline hydrolysis of 1-arylamino-1-methylthio-2-nitroethenes, are converted into isatin (1H-indole-2,3-dione) 3-oximes by treatment with concentrated sulfuric acid or trifluoromethanesulfonic acid at room temperature.
Process for preparing isatins with control of side-product formation
申请人:Wilk Kazimierz Bogdan
公开号:US20060247442A1
公开(公告)日:2006-11-02
Methods and kits for preventing or minimizing the formation of isatin oximes during formation of an isatin from an isonitrosoacetanilide are provided. Also provided are methods and kits for preventing or minimizing the formation of isatin oxime impurities after formation of an isatin from an isonitrosoacetanilide by using a decoy agent in the quenching and/or extraction steps. The isatins can be prepared using a decoy agent and desirably a strong acid. Further provided are methods for preparing isatin oximes.
Hydropyrrolo[2,3-b]indole is a privileged indoline motif, while its analogue, hydropyrrolo[3,2-b]indole, has been much less explored. Herein, we developed a cascade reaction of oxindole-derived nitrones with allenoates, providing straightforward access to the tetracyclic hydropyrrolo[3,2-b]indole scaffolds. Formation of multiple C–C/C–X bonds and cleavage could be achieved within one synthetic step
Hydropyrrolo[2,3- b ]indole 是一种特殊的二氢吲哚基序,而其类似物 hydropyrrolo[3,2- b ]indole 则鲜为人知。在此,我们开发了羟吲哚衍生的硝酮与联烯酸酯的级联反应,提供了四环氢吡咯并 [3,2- b ] 吲哚支架的直接途径。多个 C-C/C-X 键的形成和裂解可以在温和条件下使用一种简单的催化剂 (Gimeracil) 在一个合成步骤中实现。反应途径可能涉及作为关键中间体的螺氢氮杂酮的产生。