4-溴-2,3-二氢-1H-茚-1-醇 | 16657-10-6

• 分子结构分类: 有机化合物 - 苯类化合物 - 茚满类
• 中文名称: 4-溴-2,3-二氢-1H-茚-1-醇
• 英文名称: 4-bromo-2,3-dihydro-1H-inden-1-ol
• 英文别名: 4-bromoindan-1-ol
• CAS: 16657-10-6
• 化学式: C₉H₉BrO
• 分子量: 213.074
• InChiKey: RNXQQZNOSYBFTN-UHFFFAOYSA-N

物化性质

• 熔点：
  72℃
• 沸点：
  305.3±37.0 °C(Predicted)
• 密度：
  1.617±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  2.2
• 重原子数：
  11
• 可旋转键数：
  0
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.33
• 拓扑面积：
  20.2
• 氢给体数：
  1
• 氢受体数：
  1

安全信息

• 海关编码：
  2906299090
• WGK Germany：
  1
• 危险性防范说明：
  P280,P305+P351+P338
• 危险性描述：
  H302
• 储存条件：
  存于室温、密封、干燥处

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 4-Bromo-1-indanol
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 16657-10-6
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R22
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H302 Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Synonyms : 4-Bromoindan-1-ol
Formula : C9H9BrO
Molecular Weight : 213,07 g/mol
CAS-No. : 16657-10-6
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
4-BROMO-1-INDANOL
Acute Tox. 4; H302 -
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
4-BROMO-1-INDANOL
Xn, R22 -
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen bromide gas
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
the environment must be avoided.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing 69 - 73 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 2,364
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
Harmful to aquatic life.

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  4-溴-2,3-二氢-1H-茚-1-醇 在 对甲苯磺酸 作用下， 以 苯 为溶剂， 生成 4-溴茚
  参考文献：
  名称：

  苯并富烯的区域选择性直接 C−H 磷酸化

  摘要：

  当前发现的苯并富烯区域选择性 C-3 磷酸化方法极大地促进了磷酸化苯并富烯库的可用性。通过使用控制实验，可以引出反应机理，揭示反应的自由基路线。此外，后期多样化提供了广泛取代的苯并富烯部分。

  DOI：

  10.1002/asia.202201224
• 作为产物：
  描述：

  3-(3-溴苯基)丙酸 在 aluminum (III) chloride 、 sodium tetrahydroborate 、 氯化亚砜 作用下， 以 二硫化碳 、 乙醇 为溶剂， 反应 5.5h， 生成 4-溴-2,3-二氢-1H-茚-1-醇
  参考文献：
  名称：

  铃木交叉联轴器中的钯纳米颗粒：利用三咪唑盐的潜力来稳定纳米颗粒

  摘要：

  受各种钯源在咪唑基离子液体中形成纳米颗粒的倾向性的启发，我们现在报道带有十六烷基链和桥连间苯三甲部分的三咪唑盐是有效的钯纳米颗粒稳定剂，是通过钯的Chaudret型氢化有效制备的。双（二亚苄基丙酮）钯（0）​​。钯纳米粒子已经以纯净形式分离出来，其特征为1H核磁共振，透射电子显微镜，电子衍射和动态光散射。在钯含量为0.2％的情况下，新材料在铃木交叉偶联中被证明是有效的。因此，使用碘化三咪唑鎓钯材料，已从芳基溴化物和一些活化的氯化物开始制备了一系列联芳基产品。这种可能性，这催化活性可能是由于钯n中形成-杂环卡宾已通过固态寻址13 C NMR，并且其中所述酸性2-H用甲基取代的咪唑鎓类似物的合成。

  DOI：

  10.1002/adsc.201100574

文献信息

• 免疫调节化合物、组合物及其应用
  申请人：杭州和正医药有限公司

  公开号：CN112812113B

  公开（公告）日：2022-09-20

  本发明公开了一类结构新颖的酰胺类化合物或其立体异构体或其立体异构体混合物及其药学上可接受的盐，以及在制备治疗从PD1或PD‑L1活性的抑制中获益的疾病、障碍或病症的药物中的应用。本发明化合物表现出很强的PD‑1/PD‑L1阻断活性，同时能够逆转PD‑L1抑制的T细胞功能。同时，本发明化合物能激活PD‑1/PD‑L1结合导致的NFAT信号通路，且可口服吸收，具有良好的药代动力学性质。因此，本发明的化合物可以应用于在单独或与其他药物联合应用治疗从PD1或PD‑L1活性的抑制中获益的疾病、障碍或病症中的应用，包括感染性疾病、免疫性疾病、炎性疾病和癌症。
• [EN] INDANYLOXYDIHYDROBENZOFURANYLACETIC ACIDS<br/>[FR] ACIDES INDANYLOXYDIHYDROBENZOFURANYLACÉTIQUES
  申请人：BOEHRINGER INGELHEIM INT

  公开号：WO2012072691A1

  公开（公告）日：2012-06-07

  The present invention relates to compounds defined by formula (I) wherein the variables R1, R2, R3, m, and n are defined as in claim 1, possessing valuable pharmacological activity. Particularly, the compounds are activators of the receptor GPR40 and thus are suitable for treatment and prevention of diseases which can be influenced by this receptor, such as metabolic diseases, in particular diabetes type 2.

  本发明涉及具有式(I)定义的化合物，其中变量R1、R2、R3、m和n如权利要求1中定义，具有宝贵的药理活性。特别是，这些化合物是GPR40受体的激动剂，因此适合用于治疗和预防可以通过这种受体影响的疾病，例如代谢性疾病，特别是2型糖尿病。
• Asymmetric Magnesium‐Catalyzed Hydroboration by Metal‐Ligand Cooperative Catalysis
  作者：Alban Falconnet、Marc Magre、Bholanath Maity、Luigi Cavallo、Magnus Rueping

  DOI：10.1002/anie.201908012

  日期：2019.12.2

  Asymmetric catalysis with readily available, cheap, and non-toxic alkaline earth metal catalysts represents a sustainable alternative to conventional synthesis methodologies. In this context, we describe the development of a first MgII -catalyzed enantioselective hydroboration providing the products with excellent yields and enantioselectivities. NMR spectroscopy studies and DFT calculations provide

  易于获得，廉价且无毒的碱土金属催化剂的不对称催化代表了常规合成方法的可持续替代方案。在这种情况下，我们描述了第一个MgII催化的对映选择性硼氢化的发展，该产品提供了具有优异收率和对映选择性的产品。NMR光谱学研究和DFT计算提供了对反应机理和对映选择性起源的见解，这可以通过涉及非纯配体的金属-配体协同催化途径来解释。
• [EN] KRAS G12D INHIBITORS<br/>[FR] INHIBITEURS DE KRAS G12D
  申请人：MIRATI THERAPEUTICS INC

  公开号：WO2021041671A1

  公开（公告）日：2021-03-04

  The present invention relates to compounds that inhibit KRas G12D. In particular, the present invention relates to compounds that inhibit the activity of KRas G12D, pharmaceutical compositions comprising the compounds and methods of use therefor.

  本发明涉及抑制KRas G12D的化合物。具体地，本发明涉及抑制KRas G12D活性的化合物，包括这些化合物的药物组合物以及使用方法。
• INDANYLOXYDIHYDROBENZOFURANYLACETIC ACIDS
  申请人：Himmelsbach Frank

  公开号：US20120302566A1

  公开（公告）日：2012-11-29

  The present invention relates to compounds defined by formula (I) wherein the variables R 1 , R 2 , R 3 , m, and n are defined as in claim 1 , possessing valuable pharmacological activity. Particularly, the compounds are activators of the receptor GPR40 and thus are suitable for treatment and prevention of diseases which can be influenced by this receptor, such as metabolic diseases, in particular diabetes type 2.

  本发明涉及由公式(I)定义的化合物 其中变量R1、R2、R3、m和n如权利要求1中定义，具有宝贵的药理活性。特别是，这些化合物是GPR40受体的激动剂，因此适合于治疗和预防可以通过此受体影响的疾病，例如代谢性疾病，特别是2型糖尿病。