摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

9-(furan-2-yl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione | 15781-69-8

中文名称
——
中文别名
——
英文名称
9-(furan-2-yl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione
英文别名
9-(2-furyl)-3,3,6,6-tetramethyl-3,4,6,7-tetrahydro-2H-xanthene-1,8(5H,9H)-dione;9-(furan-2-yl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-2H-xanthene-1,8-dione;9-[2]furyl-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-2H-xanthene-1,8-dione;9-[2]Furyl-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-2H-xanthen-1,8-dion;9-(Furan-2-yl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexa-hydro-1h-xanthene-1,8(2h)-dione;9-(furan-2-yl)-3,3,6,6-tetramethyl-4,5,7,9-tetrahydro-2H-xanthene-1,8-dione
9-(furan-2-yl)-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-dione化学式
CAS
15781-69-8
化学式
C21H24O4
mdl
——
分子量
340.419
InChiKey
IRMDKPUJUVIIDP-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 熔点:
    62-64 °C
  • 沸点:
    484.5±45.0 °C(Predicted)
  • 密度:
    1.20±0.1 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    3.1
  • 重原子数:
    25
  • 可旋转键数:
    1
  • 环数:
    4.0
  • sp3杂化的碳原子比例:
    0.52
  • 拓扑面积:
    56.5
  • 氢给体数:
    0
  • 氢受体数:
    4

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

点击查看最新优质反应信息

文献信息

  • 4-Imidazol-1-yl-butane-1-sulfonic acid or a novel liquid salt? The NMR analysis and dual solvent-catalytic efficiency for one-pot synthesis of xanthenes
    作者:Nader Ghaffari Khaligh、Lim Shi Teng、Ong Chiu Ling、Mohd Rafie Johan、Juan Joon Ching
    DOI:10.1016/j.molliq.2019.01.041
    日期:2019.3
    structure of the product was investigated by the NMR analysis in CD3OD and DMSO‑d6. This work demonstrated that 4-imidazol-1-yl-butane-1-sulfonic acid could not be obtained through the above reaction and the mixture of zwitterionic (I) and ionic (II) structure is produced. The structure of the liquid salt (I + II) was characterized and analyzed by 2D NMR. Then, the dual solvent-catalytic efficiency of
    咪唑和1,4-丁烷磺酸等摩尔混合物的反应在90°C下在乙苯中进行12 h,并通过NMR分析在CD 3 OD和DMSO- d 6中研究产物的结构。这项工作表明通过上述反应不能获得4-咪唑-1-基-丁烷-1-磺酸,并且生成了两性离子(I)和离子(II)结构的混合物。通过2D NMR对液态盐(I + II)的结构进行表征和分析。然后,在温和的条件下研究了液态盐(I + II)的双溶剂催化效率,以合成多种黄嘌呤,从而在较短的反应时间内以良好的产率提供了所需的产物。研究了液态盐(I + II)的可回收性,其后三个运行的平均回收率为89%。循环使用的液态盐即使经过3次运行也没有表现出明显的催化活性损失,其结构与新鲜液态盐(I + II)相同。
  • Tungstophosphoric acid nanoparticles supported on polyamic acid: A mild and recoverable heterogeneous catalyst for the selective synthesis of mono and bulky bis(1,8-dioxooctahydroxanthene)s under solvent-free conditions
    作者:Masoud Nasr-Esfahani、Zahra Rafiee、Hassan Kashi
    DOI:10.1080/10426507.2015.1100185
    日期:2016.5.3
    8-dioxooctahdroxanthene) were selectively synthesized using tungstophosphoric acid nanoparticles supported on polyamic acid (TPA/PAA) as a new catalyst in solvent-free conditions. The high purity products were isolated and catalyst was easily separated in simple work-up and was recycled several times without loss of reactivity under the described reaction conditions. The reaction is characterized by short reaction
    摘要 使用负载在聚酰胺酸 (TPA/PAA) 上的磷钨酸纳米粒子作为无溶剂条件下的新型催化剂,选择性地合成了一系列 1,8-二氧代八氧杂蒽衍生物和一些拥挤的双(1,8-二氧代八氧杂蒽)。分离出高纯度产物,催化剂在简单的后处理中很容易分离,并在所述反应条件下循环多次而不会损失反应性。该反应具有反应时间短、效率高、反应条件环保等特点。图形概要
  • Grafting of sulphamic acid on functionalized sawdust: A novel solid acid catalyst for the synthesis of 1,8-dioxo-octahydroxanthenes
    作者:Shrikrishna Karhale
    DOI:10.1007/s11164-020-04136-5
    日期:2020.6
    Abstract A solid acid catalyst bearing sulphamic acid on sawdust (SA@Sawdust) was designed as a novel heterogeneous catalyst. The structure of prepared catalyst was assessed by various spectroscopic techniques such as FT-IR, field emission scanning electron microscopy and energy dispersive X-ray, thermogravimetric analysis, solid-state CP/MAS 13C-NMR spectroscopy, and CHNS analysis. The efficiency
    摘要 设计了一种在木屑上带有氨基磺酸的固体酸催化剂(SA @ Sawdust)作为新型多相催化剂。制备的催化剂的结构通过各种光谱技术进行了评估,例如FT-IR,场发射扫描电子显微镜和能量色散X射线,热重分析,固态CP / MAS 13C-NMR光谱和CHNS分析。探索了制备的催化剂的效率,以合成各种1,8-二氧-八氢氧杂蒽衍生物。发现温和的反应条件与多种官能团更相容。所获得的产物可以通过简单的过滤方便地从反应混合物中分离出来,并且催化剂被回收并重新用于下一个循环而不会显着降低催化效率。该合成路线的诱人之处在于操作简便,反应时间短,转化率高,底物范围广,后处理步骤容易以及催化剂的可重复使用性。 图形摘要
  • Magnetic Fe–Cr–Ni oxide alloy nano-belts prepared from the chemical decomposition of a stainless steel screw (a top-down approach): an efficient and cheap catalyst for multicomponent reactions
    作者:Milad Kazemnejadi、Zeinab Sharafi、Boshra Mahmoudi、Atefeh Zeinali、Mohammad Ali Nasseri
    DOI:10.1007/s13738-019-01814-z
    日期:2020.4
    A new, cheap, and accessible method has been used for the preparation of nano-belts from the chemical decomposition (top-down approach) of a cheap stainless steel screw and found as an efficient magnetically recyclable nanocatalyst for the preparation of quinolines and 1,8-dioxo-octahydroxanthenes under mild reaction conditions. The nano-belts, Fe–Cr–Ni oxide alloy, was prepared in a two-step synthesis and characterized with various instrumental methods. Due to magnetic property of the screw (a ferritic-alloy), the resultant nano-belts is magnetic. Magnetic Fe–Cr–Ni alloy nano-belts were applied toward efficient preparation of quinolines and 1,8-dioxo-octahydroxanthenes under mild conditions. The catalyst could be readily recovered and recycled for several consecutive runs, while it suffers from a very low metal leaching and subsequently efficiency drop.
    一种新的、廉价且易得的方法已被用于从廉价不锈钢螺丝的化学分解(自上而下的方法)中制备纳米带,并发现其在温和反应条件下作为高效的磁性可回收纳米催化剂,用于喹啉和1,8-二氧杂-八氢氧杂蒽的制备。这种纳米带,即Fe–Cr–Ni氧化物合金,是通过两步合成法制备的,并使用多种仪器方法进行了表征。由于螺丝(一种铁素体合金)的磁性特性,所得纳米带也具有磁性。磁性Fe–Cr–Ni合金纳米带在温和条件下被应用于高效制备喹啉和1,8-二氧杂-八氢氧杂蒽。该催化剂可以轻易地回收并在多次连续运行中循环使用,同时金属溶出现象极少,因此催化效率几乎不会下降。
  • Synthesis and Study of Catalytic, Anti–Bacterial, Anti–Oxidant, and DNA Cleavage Properties of Ag–Co and Ag–Ni Magnetic Nanoparticles
    作者:Keveh Pravanak Boroujeni、Mansooreh Shahrokh、Jamshid Karvani、Niloofar Moradi、Ahmad Farokhnia、Mohsen Mobini
    DOI:10.17344/acsi.2018.4376
    日期:——
    Magnetic Ag–Co and Ag–Ni alloy nanoparticles were prepared through a chemical reduction method using their corresponding [Co(NH 3 ) 6 ]Cl 3 and [Ni(C 2 O 4 ) 2 ]K 2 complexes, and AgNO 3 . In this reaction, hydrazine monohydrate was used as reducing agent. The obtained nanoparticles were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive
    磁性Ag-Co和Ag-Ni合金纳米粒子是通过化学还原法使用相应的[Co(NH 3)6] Cl 3和[Ni(C 2 O 4)2] K 2配合物以及AgNO 3制备的。在该反应中,使用一水合肼作为还原剂。通过傅立叶变换红外光谱(FT-IR),扫描电子显微镜(SEM),能量色散光谱(EDS),X射线衍射(XRD)和振动样品磁力计(VSM)对获得的纳米颗粒进行表征。Ag-Co和Ag-Ni纳米合金在5,5-二甲基-1,3-环己二酮(二甲酮)与芳香醛的反应中制备1,8-二氧辛八氢氧杂蒽中表现出出色的催化性能。催化剂由外部永磁体分离并重复使用。两个都,
查看更多