1-(3-氨基苯)吡咯烷-2-酮 | 31992-43-5

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 吡咯烷类
• 中文名称: 1-(3-氨基苯)吡咯烷-2-酮
• 中文别名: 1-(3-氨基苯基)-2-吡咯烷酮
• 英文名称: 1-(3-aminophenyl)pyrrolidin-2-one
• CAS: 31992-43-5
• 化学式: C₁₀H₁₂N₂O
• mdl: MFCD00468694
• 分子量: 176.218
• InChiKey: ZQGGRBIDRBYUJS-UHFFFAOYSA-N

物化性质

• 熔点：
  105-107 °C(Solv: benzene (71-43-2))
• 沸点：
  205-210 °C(Press: 1 Torr)
• 密度：
  1.234±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.7
• 重原子数：
  13
• 可旋转键数：
  1
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.3
• 拓扑面积：
  46.3
• 氢给体数：
  1
• 氢受体数：
  2

安全信息

• 危险等级：
  IRRITANT
• 海关编码：
  2933790090
• WGK Germany：
  3
• 危险标志：
  GHS07
• 危险性描述：
  H302

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 1-(3-Aminophenyl)Pyrrolidin-2-One
: CBR00192
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R22
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazard none
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 176,22 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
1-(3-Aminophenyl)Pyrrolidin-2-One
Acute Tox. 4; H302 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
1-(3-Aminophenyl)Pyrrolidin-2-One
Xn, R22 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
No data available
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-(3-氨基苯)吡咯烷-2-酮 在 盐酸 、 溶剂黄146 、 sodium nitrite 、 copper(II) choride dihydrate 、 二氧化硫 作用下， 以 水 、 乙腈 为溶剂， 反应 16.0h， 以0.7 g的产率得到3-(2-氧代吡咯烷-1-基)苯-1-磺酰氯
  参考文献：
  名称：

  新型叔磺酰胺类作为有效的抗癌药

  摘要：

  对于美国成年女性而言，乳腺癌是最普遍的癌症形式。靶向信号转导失调的化合物可以是有效的抗癌疗法。Wingless相关整合位点（Wnt）途径是乳腺癌细胞中经常失调的一个重要信号通路。这项工作的目的是优化筛选活动中的“成功”。在Wnt转录分析中测试了76,000种化合物，并揭示了有效且可重现的“命中”化合物1。的药物化学优化1导致更有效的和药物样分子，19，24和25（即，Wnt途径的IC 50值分别为11、18和7 nM）。主要结果表明化合物19，24和25分别为在乳腺癌细胞系中的有效的抗增殖剂，MCF-7（即，IC 50个值= 10，图7和4nM的，分别地）和MDA-MB 231（即，IC 50个值分别为13、13和16 nM）。化合物19在体外与化学治疗的阿霉素协同抗增殖。一个主要结论是，化合物19在体外和乳腺癌异种移植动物模型中增强了阿霉素的抗增殖能力。

  DOI：

  10.1016/j.bmc.2018.07.042
• 作为产物：
  描述：

  1-(3-硝基苯基)吡咯烷-2-酮 在 palladium on activated charcoal 、 氢气 作用下， 以 乙酸乙酯 为溶剂， 生成 1-(3-氨基苯)吡咯烷-2-酮
  参考文献：
  名称：

  新型叔磺酰胺类作为有效的抗癌药

  摘要：

  对于美国成年女性而言，乳腺癌是最普遍的癌症形式。靶向信号转导失调的化合物可以是有效的抗癌疗法。Wingless相关整合位点（Wnt）途径是乳腺癌细胞中经常失调的一个重要信号通路。这项工作的目的是优化筛选活动中的“成功”。在Wnt转录分析中测试了76,000种化合物，并揭示了有效且可重现的“命中”化合物1。的药物化学优化1导致更有效的和药物样分子，19，24和25（即，Wnt途径的IC 50值分别为11、18和7 nM）。主要结果表明化合物19，24和25分别为在乳腺癌细胞系中的有效的抗增殖剂，MCF-7（即，IC 50个值= 10，图7和4nM的，分别地）和MDA-MB 231（即，IC 50个值分别为13、13和16 nM）。化合物19在体外与化学治疗的阿霉素协同抗增殖。一个主要结论是，化合物19在体外和乳腺癌异种移植动物模型中增强了阿霉素的抗增殖能力。

  DOI：

  10.1016/j.bmc.2018.07.042

文献信息

• [EN] PYRROLOTRIAZINES AS ALK AND JAK2 INHIBITORS<br/>[FR] PYRROLOTRIAZINES EN TANT QU'INHIBITEURS D'ALK ET DE JAK2
  申请人：CEPHALON INC

  公开号：WO2010071885A1

  公开（公告）日：2010-06-24

  The present invention provides a compound of formula (I) or a salt form thereof, wherein Q1, Q2, Q3, and Q4 are as defined herein. The compound of formula (I) has ALK and/or JAK2 inhibitory activity, and may be used to treat proliferative disorders.

  本发明提供了一种式（I）的化合物或其盐形式，其中Q1、Q2、Q3和Q4如本文所定义。式（I）的化合物具有ALK和/或JAK2抑制活性，并可用于治疗增殖性疾病。
• [EN] PYRIMIDINE DERIVATIVES CAPABLE OF INHIBITING ONE OR MORE KINASES<br/>[FR] DÉRIVÉS DE PYRIMIDINE CAPABLES D'INHIBER UNE OU PLUSIEURS KINASES
  申请人：MEDICAL RES COUNCIL

  公开号：WO2009122180A1

  公开（公告）日：2009-10-08

  A first aspect of the invention relates to a compound of formula (I), or a pharmaceutically acceptable salt or ester thereof, formula (I): wherein: R1 is C3-8-cycloalkyl; X is O, NR7 or C3-6-heterocycloalkyl; R2 is aryl, heteroaryl, fused or unfused aryl-C3-6-heterocycloalkyl or fused or unfused heteroaryl-C3-6-heterocycIoalkyl, each of which is optionally substituted by one or more substitutents selected from aryl, heteroaryl, C1-6-alkyl, C3-7-cycloalkyl and a group A, wherein said C1-6-alkyl group is optionally substituted by one or more substituents selected from aryl, heteroaryl, R10 and a group A, said heteroaryl group is optionally substituted by one or more R10 groups; and wherein said C3-6-heterocycloalkyl group optionally contains one or more groups selected from oxygen, sulfur, nitrogen and CO; R3 is C1-6-alkyl optionally substituted by one or more substituents selected from aryl, heteroaryl, -NR4R5, -OR6, -NR7(CO)R6, -NR7(CO)NR4R5, -NR7SO2R6, -NR7COOR7, -CONR4R5, C3-6-heterocycloalkyl and formula (a, b, c): wherein R4-7 and A are as defined in the claims. Further aspects relate to the use of said compounds in the treatment of various therapeutic disorders, and more particularly as inhibitors of one or more kinases.

  本发明的第一个方面涉及式(I)的化合物，或其药学上可接受的盐或酯，式(I)如下：其中：R1为C3-8环烷基；X为O、NR7或C3-6杂环烷基；R2为芳基、杂芳基、融合或未融合的芳基-C3-6杂环烷基或融合或未融合的杂芳基-C3-6杂环烷基，每个基可选择地由来自芳基、杂芳基、C1-6烷基、C3-7环烷基和A基的一个或多个取代基取代，其中所述C1-6烷基基可选择地由来自芳基、杂芳基、R10和A基的一个或多个取代基取代，所述杂芳基可选择地由一个或多个R10基取代；以及所述C3-6杂环烷基基可选择地包含一个或多个来自氧、硫、氮和CO的基；R3为C1-6烷基，可选择地由一个或多个来自芳基、杂芳基、-NR4R5、-OR6、-NR7(CO)R6、-NR7(CO)NR4R5、-NR7SO2R6、-NR7COOR7、-CONR4R5、C3-6杂环烷基和式(a, b, c)的取代基取代；其中R4-7和A如权利要求中所定义。进一步方面涉及所述化合物在治疗各种治疗性疾病中的使用，特别是作为一个或多个激酶的抑制剂。
• [EN] 4-PYRAZOLYL-N-ARYLPYRIMIDIN-2-AMINES AND 4-PYRAZOLYL-N-HETEROARYLPYRIMIDIN-2-AMINES AS JANUS KINASE INHIBITORS<br/>[FR] 4-PYRAZOLYL-N-ARYLPYRIMIDIN-2-AMINES ET 4-PYRAZOLYL-N-HÉTÉROARYLPYRIMIDIN-2-AMINES EN TANT QU'INHIBITEURS DE JANUS KINASE
  申请人：INCYTE CORP

  公开号：WO2009064835A1

  公开（公告）日：2009-05-22

  The present invention provides substituted bicyclic heteroaryl compounds, 5 including, for example, 4-pyrazoIyI-N-arylpyrirnidin-2-arnines and 4-pyrazolyl-N-heteroarylpyτimidin-2-amines that modulate the activity of kinases and are useful in the treatment of diseases related to activity of kinases including, for example, immune-related diseases, skin disorders, myeloid proliferative disorders, cancer, and other diseases.formule :(1)

  本发明提供了取代的双环杂环芳基化合物，包括例如4-吡唑基-N-芳基吡啶-2-胺和4-吡唑基-N-杂环芳基嘧啶-2-胺，这些化合物调节激酶的活性，在治疗与激酶活性相关的疾病方面具有用处，例如免疫相关疾病、皮肤疾病、髓细胞增生性疾病、癌症和其他疾病。公式：(1)
• [EN] CONDENSED HETEROCYCLIC COMPOUNDS HAVING 5-HT6 RECEPTOR AFFINITY<br/>[FR] COMPOSÉS HÉTÉROCYCLIQUES CONDENSÉS AYANT UNE AFFINITÉ POUR LE RÉCEPTEUR 5-HT6
  申请人：MEMORY PHARM CORP

  公开号：WO2010021797A1

  公开（公告）日：2010-02-25

  The present disclosure provides compounds having affinity for the 5-HT6 receptor which are of the formula (I) wherein R1, A, B, D, E, G, Q, Ar, n, m, and p are as defined herein. The disclosure also relates to methods of preparing such compounds, compositions containing such compounds, and methods of use thereof.

  本公开提供了具有亲和力的化合物，其对5-HT6受体具有亲和力，其化学式为（I），其中R1、A、B、D、E、G、Q、Ar、n、m和p如本文所定义。该公开还涉及制备这种化合物的方法、含有这种化合物的组合物以及使用方法。
• [EN] 4'-AMINO CYCLIC COMPOUNDS HAVING 5-HT6 RECEPTOR AFFINITY<br/>[FR] COMPOSÉS 4'-AMINO CYCLIQUES PRÉSENTANT UNE AFFINITÉ POUR LE RÉCEPTEUR 5-HT6
  申请人：MEMORY PHARM CORP

  公开号：WO2010024980A1

  公开（公告）日：2010-03-04

  The present disclosure provides compounds having affinity for the 5-HT6 receptor which are of the formula (I): formula (I) wherein Cy is selected from formula (Il) and wherein R1, R2, R3, Q, G, Ar, m, n and p are as defined herein. The disclosure also relates to methods of preparing such compounds, compositions containing such compounds, and methods of use thereof.

  本公开提供了具有对5-HT6受体亲和力的化合物，其化学式为（I）：化学式（I），其中Cy从化学式（II）中选择，R1、R2、R3、Q、G、Ar、m、n和p的定义如本文所述。该公开还涉及制备这种化合物的方法、含有这种化合物的组合物以及它们的使用方法。