2-(丙烷-2-基氨基)苯甲腈 | 147531-47-3

• 分子结构分类: 有机化合物 - 有机氮化合物
• 中文名称: 2-(丙烷-2-基氨基)苯甲腈
• 英文名称: 2-(isopropylamino)benzo-nitrile
• 英文别名: 2-(Isopropylamino)benzonitrile；2-(propan-2-ylamino)benzonitrile
• CAS: 147531-47-3
• 化学式: C₁₀H₁₂N₂
• 分子量: 160.219
• InChiKey: UFFFYFBEGKQPKR-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  3
• 重原子数：
  12
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.3
• 拓扑面积：
  35.8
• 氢给体数：
  1
• 氢受体数：
  2

安全信息

• 海关编码：
  2926909090

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 2-(Isopropylamino)benzonitrile
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 2-(Isopropylamino)benzonitrile
CAS number: 147531-47-3

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C10H12N2
Molecular weight: 160.2

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  2-(丙烷-2-基氨基)苯甲腈 在 RuH₂(CO)(PPh₃)₃ 、 甲基锂 作用下， 以 四氢呋喃 、 乙醚 、 对二甲苯 、 正戊烷 为溶剂， 反应 45.0h， 生成 2,2,2-三甲基苯乙酮
  参考文献：
  名称：

  钌催化的苯胺衍生物还原脱氨和串联烷基化

  摘要：

  我们通过将C-N键氧化加到钌中心上，开发了苯胺的两个新的催化转化。一种是钌催化的N-烷基化邻酰基丙氨酸的还原脱氨基去氨化反应。另一个是N-烷基化的邻苯二甲酰基苯胺与烯烃的催化偶联，通过C-N键断裂产生邻烷基化的芳族酮。该反应涉及氢化钌类物质作为中间体，其是从钌酰胺类物质中除去β-氢化物后形成的。

  DOI：

  10.1016/j.jorganchem.2013.06.001
• 作为产物：
  描述：

  2-(Propan-2-ylideneamino)benzonitrile 在 sodium tetrahydroborate 作用下， 以 甲醇 为溶剂， 反应 1.0h， 生成 2-(丙烷-2-基氨基)苯甲腈
  参考文献：
  名称：

  合成2-二苯基膦酰基-3-羟基，氨基和烷基吲哚衍生物的简便方法

  摘要：

  通过分别对含有羧酰胺基，氰基和氧代基团的芳族霍纳-维蒂希试剂进行碱诱导的分子内环化，已经有效地制备了一系列2-二苯基膦酰基-3-羟基，氨基和烷基吲哚衍生物。

  DOI：

  10.1016/s0040-4020(01)90195-4

文献信息

• Reductive Alkylation of Aromatic Amines with Enol Ethers
  作者：T. Jagadeeswar Reddy、Michael Leclair、Melanie Proulx

  DOI：10.1055/s-2005-863704

  日期：——

  Reductive alkylation of aromatic amines with 2-meth­oxypropene using 1.0 equivalent of HOAc and NaBH(OAc)3 in 1,2-dichloroethane (DCE) at room temperature furnished N-isopropyl amines in 50-98% yields. This method was successfully extended to trimethylsilyl enol ethers. The mild reaction conditions provide a new alternative procedure for the reductive amination of electron deficient aromatic amines

  在室温下，在 1,2-二氯乙烷 (DCE) 中使用 1.0 当量的 HOAc 和 NaBH(OAc) 3 对芳香胺与 2-甲氧基丙烯进行还原烷基化，以 50-98% 的产率提供 N-异丙基胺。该方法成功地扩展到三甲基甲硅烷基烯醇醚。温和的反应条件为缺电​​子芳香胺的还原胺化提供了一种新的替代方法。
• Rhodium(III)-Catalyzed Direct Cyanation of Aromatic C–H Bond to Form 2-(Alkylamino)benzonitriles Using <i>N</i>-Nitroso As Directing Group
  作者：Jiawei Dong、Zhongjie Wu、Zhengyi Liu、Ping Liu、Peipei Sun

  DOI：10.1021/acs.joc.5b01666

  日期：2015.12.18

  2-(Alkylamino)benzonitriles were synthesized via a rhodium-catalyzed cyanation on the aryl C–H bond and subsequent denitrosation of N-nitrosoarylamines using a removable nitroso as the directing group, in which N-cyano-N-phenyl-p-methylbenzenesulfonamide (NCTS) was used as the “CN” source. Various substituents on the aryl ring and amino group of N-nitrosoarylamines tolerated the reaction, and the corresponding

  2-（烷基氨基）苄腈是通过在芳基C–H键上进行铑催化的氰化反应以及随后使用可除去的亚硝基作为导向基团对N-亚硝基芳胺进行亚硝化而合成的，其中N-氰基-N-苯基-对甲基苯磺酰胺（NCTS）用作“ CN”来源。N-亚硝基芳基胺的芳基环和氨基上的各种取代基可耐受该反应，并且以中等至良好的产率获得了相应的产物。
• Imidazoquinazoline derivatives
  申请人：Kyowa Hakko Kogyo Co., Ltd.

  公开号：US06127541A1

  公开（公告）日：2000-10-03

  Imidazoquinoline derivatives of the formula ##STR1## (wherein X may be O or S) provide selective cyclic guanosine 3',5' monophosphate (cGMP)--specific phosphodiesterase (PDE) inhibitory activity. The compounds are useful for treating or ameliorating cardiovascular disease such as thrombosis, angina pectoris, hypertension, heart failure and arterial sclerosis, as well as asthma, impotence and the like.

  Imidazoquinoline衍生物的化学式为##STR1##（其中X可以是O或S），提供选择性环状鸟苷酸3',5'单磷酸（cGMP）特异性磷酸二酯酶（PDE）抑制活性。这些化合物可用于治疗或改善心血管疾病，如血栓形成、心绞痛、高血压、心力衰竭和动脉硬化，以及哮喘、阳痿等疾病。
• Method of inhibiting neoplastic cells with imidazoquinazoline derivatives
  申请人：——

  公开号：US20020193389A1

  公开（公告）日：2002-12-19

  A method for inhibiting neoplasia, particularly cancerous and precancerous lesions by exposing the affected cells to imidazoquinazoline derivatives.

  通过将受影响的细胞暴露于咪唑喹啉衍生物，抑制新生物的方法，特别是癌症和癌前病变。
• One-pot multistep synthesis of 3,4-fused isoquinolin-1(2H)-one analogs
  作者：Lianhai Li、Waepril Kimberly S. Chua

  DOI：10.1016/j.tetlet.2011.01.089

  日期：2011.4

  We have developed a robust approach for the synthesis of 3,4-fused isoquinolin-1(2H)-one analogs. A benzonitrile or a nicotinonitrile bearing an ortho-substituent, such as –OH, –SH, or –NHR (R = alkyl or aryl) can be deprotonated by KOtBu and then reacted with methyl 2-(bromomethyl)benzoate (8) to form its corresponding O-, S-, or N-alkylation product. The product thus formed is then treated with KOtBu

  我们已经开发了一种强大的方法，用于合成3,4-融合的异喹啉-1（2H）-one类似物。带有邻位取代基（例如–OH，–SH或–NHR（R =烷基或芳基））的苄腈或烟腈可以通过KO t Bu进行质子化，然后与2-（溴甲基）苯甲酸甲酯反应（8）形成其相应的O-，S-或N-烷基化产物。然后将如此形成的产物再次用KO t Bu处理以引发级联过程，该级联过程将导致其相应的3，4-稠合的异喹啉-1（2H）-一的形成。这种多步合成以及最终产物的纯化可以一锅法完成。