作者:Haliza Abdul Aziz、Mohamed Kheireddine Aroua、Rozita Yusoff、Noor Azeerah Abas、Zainab Idris、Hazimah Abu Hassan
DOI:10.1007/s11743-015-1736-0
日期:2016.1
This study involved maximizing the conversion of palm‐based methyl palmitate to esteramine, an intermediate for esterquats via transesterification with triethanolamine, aided by Ca–Al as a heterogeneous catalyst in a 500‐ml reaction unit. The effect of process parameters on the conversion was investigated. The optimum process parameters, consisting of a mole ratio of 1.8:1 (methyl palmitate:triethanolamine)
这项研究涉及最大程度地将棕榈基棕榈酸甲酯转化为酯胺(酯胺是通过与三乙醇胺进行酯交换反应而形成的酯季铵盐的中间体),并在500 ml反应装置中借助Ca-Al作为非均相催化剂。研究了工艺参数对转化率的影响。最佳的工艺参数由1.8:1(棕榈酸甲酯:三乙醇胺)的摩尔比,170°C,10 mbar,0.5%的催化剂和2小时的持续时间组成,转化率超过90%。与传统的使用甲醇钠的方法相比,使用Ca-Al进行的酯交换反应对环境更加友好,简化了下游分离过程,并在随后的三个循环中成功测试了催化剂的可重复使用性。