2-氯-n-丙基乙酰胺 | 13916-39-7

• 分子结构分类: 有机化合物 - 有机酸及其衍生物 - 羧酸及其衍生物
• 中文名称: 2-氯-n-丙基乙酰胺
• 中文别名: 2-氯-正丙基-乙酰胺；2-氯-N-丙基乙酰胺
• 英文名称: N-(propyl)chloroacetamide
• 英文别名: 2-chloro-N-propylacetamide；(N-(n-propyl))-2-chloroacetamide；N-propyl-2-chloroacetamide
• CAS: 13916-39-7
• 化学式: C₅H₁₀ClNO
• mdl: MFCD01355490
• 分子量: 135.594
• InChiKey: SHWUYQDIJUWTPM-UHFFFAOYSA-N

物化性质

• 沸点：
  105-106 °C(Press: 10.5 Torr)
• 密度：
  1.056±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.1
• 重原子数：
  8
• 可旋转键数：
  3
• 环数：
  0.0
• sp3杂化的碳原子比例：
  0.8
• 拓扑面积：
  29.1
• 氢给体数：
  1
• 氢受体数：
  1

安全信息

• 危险等级：
  IRRITANT
• 海关编码：
  2924199090
• 储存条件：
  储存条件：2-8℃，密封保存，置于干燥处。

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 2-Chloro-N-Propylacetamide
: OTV000047
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R22
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazard none
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 135,6 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
2-Chloro-N-Propylacetamide
Acute Tox. 4; H302 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
2-Chloro-N-Propylacetamide
Xn, R22 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
No data available
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  2-氯-n-丙基乙酰胺 在 氢氧化钾 作用下， 以 丙酮 为溶剂， 反应 5.5h， 生成 1-Propyl-9,9,9a-trimethyl-1,2,3,9a-tetrahydro-9H-imidazo<1,2-a>indol-2-one
  参考文献：
  名称：

  Synthesis of 1-substituted 1,2,3,9a-tetrahydro-9H-imidazo[1,2-a]indol-2-ones

  摘要：

  DOI：

  10.1007/bf00471802
• 作为产物：
  描述：

  正丙胺 、 氯乙酰氯 在 三乙胺 作用下， 以 二氯甲烷 为溶剂， 生成 2-氯-n-丙基乙酰胺
  参考文献：
  名称：

  含酰胺喹唑啉酮衍生物的设计、合成及其抗菌活性

  摘要：

  本研究利用主动剪接原理设计合成了一系列新型含酰胺喹唑啉酮衍生物。对这些化合物的生物活性进行了测试，发现它们具有一定的抗菌活性。其中，化合物18对丁香假单胞菌表现出良好的活性。猕猴桃( Psa )体外EC 50值为 39.2 mg/L，优于噻二唑铜 (73.9 mg/L) 和噻唑锌 (45.1 mg/L)。化合物18还对米黄单胞菌表现出良好的抗菌活性。米霉（ Xoo）在100 mg/L的体外，抑制率为70.9%，优于噻二唑铜（68.5%）和噻唑锌（70.2%）。根据构效关系分析，不同的R 1位点或电子给体取代基的引入极大地影响了化合物的抗菌活性。经过扫描电子显微镜实验，发现化合物18会导致细菌破碎和表面起皱，从而产生抗菌作用。因此，化合物18可以进一步优化，为潜在的抗菌剂奠定基础。

  DOI：

  10.1016/j.phytol.2023.07.003

文献信息

• 野黄芩素衍生物及其制备方法和应用
  申请人：中国药科大学

  公开号：CN106883244B

  公开（公告）日：2018-11-30

  本发明公开了如式I所示的野黄芩素衍生物。本发明还公开了野黄芩素衍生物的制备方法。本发明还公开了野黄芩素衍生物在制备抗肿瘤药物方面的应用。本发明以野黄芩素为起始原料，合成了一系列A环具有苯并二氧六环结构，B环4’位连接脂溶性基团和水溶性基团的野黄芩素衍生物，该合成方法简单，具有较好的可操作性和反应收率。本发明公开的野黄芩素衍生物具有抑制多种肿瘤细胞增殖活性，活性优于或相当于野黄芩素，有望开发成为抗肿瘤药物。
• [EN] CERTAIN CHEMICAL ENTITIES, COMPOSITIONS, AND METHODS<br/>[FR] ENTITÉS CHIMIQUES, COMPOSITIONS ET MÉTHODES PARTICULIÈRES
  申请人：NEUPHARMA INC

  公开号：WO2018035061A1

  公开（公告）日：2018-02-22

  Chemical entities that are kinase inhibitors, pharmaceutical compositions and methods of treatment of cancer are described.

  化学实体、药物组合物及其用于治疗癌症的方法，所述化学实体为激酶抑制剂。
• Copper(I)-Catalyzed One-Pot Synthesis of 2<i>H</i>-1,4-Benzoxazin-3-(4<i>H</i>)-ones from <i>o</i>-Halophenols and 2-Chloroacetamides
  作者：Enguang Feng、He Huang、Yu Zhou、Deju Ye、Hualiang Jiang、Hong Liu

  DOI：10.1021/jo802818s

  日期：2009.4.3

  We developed an efficient and convenient method for preparing N-substituted 2H-1,4-benzoxazin-3-(4H)-ones from 2-halophenols via a nucleophilic substitution with 2-chloroacetamides followed by a CuI-catalyzed coupling cyclization. A broad spectrum of substrates can be effectively employed to afford the desired products in good yields. Since this method involves simple reaction conditions, a short reaction

  我们开发了一种高效便捷的方法，可通过2-氯乙酰胺的亲核取代反应从2-卤代苯酚制备N-取代的2 H -1,4-苯并恶嗪-3-（4 H）-酮，然后进行CuI催化的偶联环化反应。可以有效地使用各种各样的底物，以高产率提供所需的产物。由于该方法涉及简单的反应条件，较短的反应时间和较宽的底物范围，因此对于有效制备生物学上和医学上感兴趣的分子特别有吸引力。
• SURFACE-MODIFIED POLYMER FILMS
  申请人：Lellouche Jean-Paul

  公开号：US20110306722A1

  公开（公告）日：2011-12-15

  Surface-modified polymer films for coating are provided, wherein the surface is modified by covalent binding of nano- or micro-particles comprising a photoreactive species. The surface of the polymer film, e.g. a parylene film, may be modified by covalent binding of nano- or micro-particles of a polymer, e.g. a conductive bifunctional polymer further comprising a chemically reactive functional group, or of a hybrid organic-inorganic oxide, e.g., silica, network comprising a photoreactive species. Further provided are: (i) polymerizable monomers, the conductive bifunctional polymers obtained therefrom; (ii) a hybrid photoreactive organic-inorganic oxide network; and (iii) micro- or nano-particles made from (i) or (ii).

  提供用于涂层的表面改性聚合物薄膜，其中通过共价结合包含光反应物种的纳米或微米颗粒来改性表面。聚合物薄膜的表面，例如帕里林薄膜，可以通过共价结合聚合物的纳米或微米颗粒来改性，例如包含化学反应性官能团的导电双官能聚合物，或者包含光反应物种的混合有机-无机氧化物，例如二氧化硅，网络。还提供：(i)可聚合单体，由此得到的导电双官能聚合物；(ii)混合光反应有机-无机氧化物网络；和(iii)由(i)或(ii)制成的微米或纳米颗粒。
• ALGORITHM FOR DESIGNING IRREVERSIBLE INHIBITORS
  申请人：Singh Juswinder

  公开号：US20100185419A1

  公开（公告）日：2010-07-22

  The invention is an algorithm and method for designing an inhibitor that covalently binds a target polypeptide. The algorithm and method can be used to rapidly and efficiently convert reversible inhibitors into irreversible inhibitors.

  这项发明是一种用于设计与靶多肽共价结合的抑制剂的算法和方法。该算法和方法可用于快速高效地将可逆抑制剂转化为不可逆抑制剂。