3-(4-甲氧苯基)-5-甲基异噁唑-4-甲醛 | 273223-12-4

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯酚醚
• 中文名称: 3-(4-甲氧苯基)-5-甲基异噁唑-4-甲醛
• 中文别名: 3-(4-甲氧苯基)-5-甲基异唑-4-甲醛
• 英文名称: 3-(4-methoxyphenyl)-5-methylisoxazole-4-carboxaldehyde
• 英文别名: 3-(4-methoxyphenyl)-5-methyl-1,2-oxazole-4-carbaldehyde
• CAS: 273223-12-4
• 化学式: C₁₂H₁₁NO₃
• mdl: MFCD12196085
• 分子量: 217.224
• InChiKey: ARUDIIZCBYPNNS-UHFFFAOYSA-N

物化性质

• 熔点：
  63-68°C
• 沸点：
  394.4±42.0 °C(Predicted)
• 密度：
  1.189±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.9
• 重原子数：
  16
• 可旋转键数：
  3
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.166
• 拓扑面积：
  52.3
• 氢给体数：
  0
• 氢受体数：
  4

安全信息

• 海关编码：
  2934999090
• WGK Germany：
  3

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : 3-(4-Methoxyphenyl)-5-methylisoxazole-4-
carboxaldehyde
CAS-No. : 273223-12-4
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 4)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful if swallowed.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Warning
Hazard statement(s)
H302 Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22 Harmful if swallowed.
S-phrase(s) none
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : C12H11NO3
Molecular Weight : 217,22 g/mol
Component Concentration
3-(4-Methoxyphenyl)-5-methylisoxazole-4-carboxaldehyde
CAS-No. 273223-12-4 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Store under inert gas. Light sensitive. Heat sensitive. Moisture sensitive.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 63 - 68 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion Harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes May cause eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  3-(4-甲氧苯基)-5-甲基异噁唑-4-甲醛 在 盐酸 、 正丁基锂 、 tris(diethylamide)titanium chloride 作用下， 以 四氢呋喃 、 正己烷 、 乙腈 为溶剂， 反应 36.0h， 生成 methyl (2R,3R)-2-amino-3-hydroxy-3-[4-(4-methoxyphenyl-5-methyl)isoxazolyl]propionate
  参考文献：
  名称：

  手性甘氨酸烯醇合成子与杂芳醛的立体选择性羟醛加成

  摘要：

  The stereocontrolled addition of (2S)-(+)-2,5-dihydro-3,6-dimethoxy-2-isopropylpyrazine (1) to heterocyclic aldehydes (2) gives mainly a mixture of syn/anti isomers (3) and (4) whose steric configuration was assigned on the basis of spectroscopic data and accepted model for aldol condensation of 1. The possible conversion of adducts to three beta-substituted heteroaromatic serines is demonstrated.

  DOI：

  10.3987/com-99-s145
• 作为产物：
  描述：

  3-(4-甲氧基苯基)-5-甲基-1,2-恶唑-4-羧酸乙酯 在 lithium aluminium tetrahydride 、 magnesium sulfate 、 pyridinium chlorochromate 作用下， 以 四氢呋喃 、 二氯甲烷 为溶剂， 反应 2.0h， 生成 3-(4-甲氧苯基)-5-甲基异噁唑-4-甲醛
  参考文献：
  名称：

  Unique Structure−Activity Relationship for 4-Isoxazolyl-1,4-dihydropyridines

  摘要：

  A series of 4-isoxazolyl-1,4-dihydropyridines (IDs) were prepared and characterized, and their interaction with the calcium channel was studied by patch clamp analysis. The structure-ctivity relationship (SAR) that emerges is distinct from the 4-aryldihydropyridines (DHPs), and affinity increases dramatically at higher holding potentials. Thus, among the 3'-arylisoxazolyl analogues p-Br > p-C much greater than p-F, and p-Cl > m-Cl > o-Cl much greater than o-MeO. Four of the analogues were examined by single-crystal X-ray diffractometry, and all were found to adopt an O-exo conformation in the solid state. The calculated barrier to rotation, however, suggests that rotation about the juncture between the heterocyclic rings is plausible under physiological conditions. A variable-temperature NMR study confirmed the computation. With Striessnig's computational sequence homologation procedure, a working hypothesis was derived from the data that explains the unique SAR for IDs.

  DOI：

  10.1021/jm020354w

文献信息

• Lanthanide and asymmetric catalyzed syntheses of sterically hindered 4-isoxazolyl-1,4-dihydropyridines and 4-isoxazolyl-quinolones
  作者：Scott A. Steiger、Chun Li、Charles F. Campana、Nicholas R. Natale

  DOI：10.1016/j.tetlet.2015.12.038

  日期：2016.1

  The Ytterbium (III) triflate catalyzed Hantzsch synthesis allows for the preparation of sterically hindered 4-isoxazolyl-1,4-dihydropyridines in moderate to good yields. Asymmetric organocatalysis with (R)-4-Oxo-2,6-bis-(2,4,6-triisopropyl-phenyl)-3,5-dioxa-415-phospha-cyclohepta[2,1-a;3,4-a']dinaphthalen-4-ol (R-TRIP) produces moderate yields of chiral 4-isoxazolyl-quinolones with high enantioselectivity. (C) 2015 Elsevier Ltd. All rights reserved.