摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

Z-5-Hydroxy-7-methyl-oct-2-en | 75851-70-6

中文名称
——
中文别名
——
英文名称
Z-5-Hydroxy-7-methyl-oct-2-en
英文别名
(Z)-2-methyloct-6-en-4-ol
Z-5-Hydroxy-7-methyl-oct-2-en化学式
CAS
75851-70-6
化学式
C9H18O
mdl
——
分子量
142.241
InChiKey
FCLPPYVFXIKOAY-PLNGDYQASA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    197.8±9.0 °C(Predicted)
  • 密度:
    0.841±0.06 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    2.36
  • 重原子数:
    10.0
  • 可旋转键数:
    4.0
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    0.78
  • 拓扑面积:
    20.23
  • 氢给体数:
    1.0
  • 氢受体数:
    1.0

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为产物:
    描述:
    5-Hydroxy-7-methyl-octin-2 在 sodium tetrahydroborate 、 氢气nickel diacetate乙二胺 作用下, 以 乙醚乙醇 为溶剂, 反应 2.0h, 以95%的产率得到Z-5-Hydroxy-7-methyl-oct-2-en
    参考文献:
    名称:
    Zur“顺式-präferenz”加成后的丁烯基-金属杂多酚和酮与醛
    摘要:
    1-丁烯基-3-硼酸的酯加成醛,形成2-丁烯基-1-碳醇,其E / Z-比在31和12之间变化,这取决于酯组分的空间要求。讨论了配位金属离子的基团的空间体积,这是在将丁烯基金属衍生物加成酮时观察到的“顺式偏爱”的潜在原因。
    DOI:
    10.1016/s0022-328x(00)89998-2
点击查看最新优质反应信息

文献信息

  • In Situ Generated Bulky Palladium Hydride Complexes as Catalysts for the Efficient Isomerization of Olefins. Selective Transformation of Terminal Alkenes to 2-Alkenes
    作者:Delphine Gauthier、Anders T. Lindhardt、Esben P. K. Olsen、Jacob Overgaard、Troels Skrydstrup
    DOI:10.1021/ja9108424
    日期:2010.6.16
    enriched substrates provided products without epimerization at the allylic stereogenic carbon centers. Finally, some mechanistic investigations were undertaken to understand the nature of the active in situ generated Pd-H catalyst. These studies revealed that the catalytic system is highly dependent on the large steric demand of the P(tBu)(3) ligand. The use of an alternative ligand, cataCXium PinCy, also
    应用从 Pd(dba)(2)、P(tBu)(3) 和异丁酰氯的 1:1:1 混合物中获得的原位生成的大块 (II) 氢化物催化剂为异构化和多种烯烃的迁移。除了 (Z)- 到 (E)-烯烃的异构化之外,烯丙基苯、烯丙基醚和胺的共轭迁移以接近定量的产率和优异的官能团耐受性有效实现。通常使用 0.5-1.0 mol% 的催化剂负载量,但当反应在纯净条件下进行时,甚至可以实现低至 0.25 mol% 的负载量。更有趣的是,所研究的催化剂证明对将末端烯烃转化为 2-烯烃具有选择性。这种单取代烯烃的单碳迁移过程提供了一种替代催化剂,它弥合了烯丙基化和丙烯酰化/乙烯基化协议之间的差距。几种底物,包括高烯丙醇和胺,被选择性地转化为它们相应的 2-烯烃,使用对映体富集底物的例子提供了在烯丙基立体碳中心没有差向异构化的产物。最后,进行了一些机理研究以了解活性原位生成的 Pd-H 催化剂的性质。这些研究表明,催化系统高度依赖于
  • Stereo- and regiocontrol of acyclic systems via the lewis acid mediated reaction of allylic stannanes with aldehydes
    作者:Yoshinori Yamamoto、Hidetaka Yatagai、Yuji Ishihara、Norihiko Maeda、Kazuhiro Maruyama
    DOI:10.1016/0040-4020(84)80007-1
    日期:1984.1
    The reaction of crotyltrialkylstannanes (1) with aldehydes in the presence of BF3,OEt2, produces the corresponding erythro homoallyl alcohols (2) predominantly regardless of the geometry of the double bond. Further, the Lewis acid mediated reaction exhibits the enhanced Cram selectivity in comparison with other allylic organometallic reactions which proceed in the absence of Lewis acids. Use of AlCl3-i-PrOH
    在BF 3,OEt 2存在下,巴豆基三烷基烷(1)与醛的反应主要产生相应的赤型均烯丙基醇(2),而与双键的几何形状无关。此外,与在不存在路易斯酸的情况下进行的其他烯丙基有机属反应相比,路易斯酸介导的反应显示出提高的Cram选择性。使用AlCl 3 -i-PrOH作为路易斯酸完全改变了反应过程;产生线性加合物(12)而不是支链加合物(13)。1-BF 3,OEt 2的反应该系统被用于(±)Prelog-Djerassi乳酸(16)和(-)芦竹内酯(19)的短时和立体选择性合成。
  • Regioreversed addition of but-2-enyltributylstannane to aldehydes in the presence of aluminium chloride–propan-2-ol
    作者:Yoshinori Yamamoto、Norihiko Maeda、Kazuhiro Maruyama
    DOI:10.1039/c39830000742
    日期:——
    The reaction of but-2-enyltributylstannane with certain aldehydes in the presence of AlCl3–PriOH produces the α-adduct (3) either predominantly or exclusively, while the reaction in the presence of ordinary Lewis acids, such as TiCl4, SnCl4, and BF3·OEt2, affords the γ-adduct (2) exclusively.
    但-2- enyltributylstannane与在的AlCl存在某些醛反应3 -Pr我OH产生α-加合物(3)任一主要或排他地,而在普通的路易斯酸,如的TiCl存在下进行反应4, SnCl 4和BF 3 ·OEt 2仅提供γ-加合物(2)。
  • HOFFMANN R. W.; WEIDMANN U., J. ORGANOMETAL. CHEM., 1980, 195, NO 2, 137-146
    作者:HOFFMANN R. W.、 WEIDMANN U.
    DOI:——
    日期:——
查看更多