(chlorosulfonyl)(5-I-3-oxaoctafluoropentanesulfonyl)imide | 1439250-71-1

• 分子结构分类: 有机化合物 - 有机酸及其衍生物 - 有机磺酸及其衍生物
• 英文名称: (chlorosulfonyl)(5-I-3-oxaoctafluoropentanesulfonyl)imide
• CAS: 1439250-71-1
• 化学式: C₄HClF₈INO₅S₂
• 分子量: 521.532
• InChiKey: IOCRNGGVLZRDOH-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  2.21
• 重原子数：
  22.0
• 可旋转键数：
  7.0
• 环数：
  0.0
• sp3杂化的碳原子比例：
  1.0
• 拓扑面积：
  89.54
• 氢给体数：
  1.0
• 氢受体数：
  5.0

反应信息

• 作为反应物：
  描述：

  (chlorosulfonyl)(5-I-3-oxaoctafluoropentanesulfonyl)imide 在 三氟化锑 作用下， 以192 g的产率得到(fluorosulfonyl)(5-I-3-oxaoctafluoropentanesulfonyl)imide
  参考文献：
  名称：

  New hydrophobic ionic liquids based on (fluorosulfonyl)(polyfluorooxaalkanesulfonyl)imides with various oniums

  摘要：

  Sixteen ionic liquids (ILs) based on two new asymmetric imide anions, (fluorosulfonyl) (polyfluorooxaalkanesulfonyl)imide {[(FSO2)(XCF2CF2OCF2CF2SO2)Nr](-) [5X3O-FOFSI](-), X= H and I), are synthesized and characterized by in combination with various oniums, including 1,3-dialkylimidazolium, quaternary alkyl (or ether-functionalized alkyl)ammonium, N-alkyl-N-methyl-pyrrolidinium and -piperidinium. Their physicochemical properties are investigated, in terms of phase transitions, thermal stability, density, viscosity, ionic conductivity, electrochemical stability, and the capability as electrolytes to allow Li deposition/stripping. The influences of the structural variations in both the cations and anions, particularly introduction of an ether group into the anion, on the above properties are systematically studied. All the ILs are liquids at room temperature and show low glass transition temperatures, suggesting the high flexibility of the ether-functionalized imide anion. It has been demonstrated that only having an ether group into the polyfluoroalkyl chain of the imide anion affect neither the cathodic nor anodic stability of the anion and their ILs. ThelLs based on the [5H30-FOFSI](-) anion have an enough electrochemical stability to allow Li deposition/striping, while those based on the [513O-FOFS](-)] - anion show relatively low cathodic stability due to the presence of a C I bond in the anion. (C) 2013 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.electacta.2013.02.095
• 作为产物：
  描述：

  1,1,2,2-四氟-2-(1,1,2,2-四氟-2-碘乙氧基)乙烷磺酰胺 在 氯磺酸 、 氯化亚砜 作用下， 反应 30.0h， 以214 g的产率得到(chlorosulfonyl)(5-I-3-oxaoctafluoropentanesulfonyl)imide
  参考文献：
  名称：

  New hydrophobic ionic liquids based on (fluorosulfonyl)(polyfluorooxaalkanesulfonyl)imides with various oniums

  摘要：

  Sixteen ionic liquids (ILs) based on two new asymmetric imide anions, (fluorosulfonyl) (polyfluorooxaalkanesulfonyl)imide {[(FSO2)(XCF2CF2OCF2CF2SO2)Nr](-) [5X3O-FOFSI](-), X= H and I), are synthesized and characterized by in combination with various oniums, including 1,3-dialkylimidazolium, quaternary alkyl (or ether-functionalized alkyl)ammonium, N-alkyl-N-methyl-pyrrolidinium and -piperidinium. Their physicochemical properties are investigated, in terms of phase transitions, thermal stability, density, viscosity, ionic conductivity, electrochemical stability, and the capability as electrolytes to allow Li deposition/stripping. The influences of the structural variations in both the cations and anions, particularly introduction of an ether group into the anion, on the above properties are systematically studied. All the ILs are liquids at room temperature and show low glass transition temperatures, suggesting the high flexibility of the ether-functionalized imide anion. It has been demonstrated that only having an ether group into the polyfluoroalkyl chain of the imide anion affect neither the cathodic nor anodic stability of the anion and their ILs. ThelLs based on the [5H30-FOFSI](-) anion have an enough electrochemical stability to allow Li deposition/striping, while those based on the [513O-FOFS](-)] - anion show relatively low cathodic stability due to the presence of a C I bond in the anion. (C) 2013 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.electacta.2013.02.095