(E)-2-benzylidene-2,3-dihydro-1H-inden-1-one | 5706-12-7

• 分子结构分类: 有机化合物 - 苯类化合物 - 茚满类
• 英文名称: (E)-2-benzylidene-2,3-dihydro-1H-inden-1-one
• 英文别名: (E)-2-benzylidene-1-indanone；(E)-2-benzylideneindan-1-one；(E)-2-(phenylmethylene)indan-1-one；(E)-β-benzylidene-α-indanone；(E)-2-benzylideneindanone；2-Benzylidene-1-indanone；(2E)-2-benzylidene-3H-inden-1-one
• CAS: 5706-12-7
• 化学式: C₁₆H₁₂O
• 分子量: 220.271
• InChiKey: ITHXOKQJEXLMKO-GXDHUFHOSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  3.8
• 重原子数：
  17
• 可旋转键数：
  1
• 环数：
  3.0
• sp3杂化的碳原子比例：
  0.06
• 拓扑面积：
  17.1
• 氢给体数：
  0
• 氢受体数：
  1

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 2-BENZYLIDENE-1-INDANONE
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 5706-12-7
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
R52/53
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C16H12O
Molecular Weight : 220,27 g/mol
CAS-No. : 5706-12-7
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
2-BENZYLIDENE-1-INDANONE
CAS-No. 5706-12-7 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
2-BENZYLIDENE-1-INDANONE
CAS-No. 5706-12-7 R52/53 <= 100 %

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
the environment must be avoided.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 3,457
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
Harmful to aquatic life.
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  (E)-2-benzylidene-2,3-dihydro-1H-inden-1-one 在 N-溴代丁二酰亚胺(NBS) 、 过氧化苯甲酰 作用下， 以 四氯化碳 为溶剂， 以70%的产率得到(Z)-2-benzylidene-3-bromo-2,3-dihydro-1H-inden-1-one
  参考文献：
  名称：

  [EN] SMALL MOLECULE INHIBITORS OF DUSP6 AND USES THEREFOR
  [FR] INHIBITEURS DE DUSP6 À PETITE MOLÉCULE ET UTILISATIONS DE CEUX-CI

  摘要：

  公开号：

  WO2010108058A3
• 作为产物：
  描述：

  1-(2-methylphenyl)-3-phenylprop-2-yn-1-one 在 aluminum (III) chloride 作用下， 以 1,4-二氧六环 为溶剂， 反应 72.0h， 以86%的产率得到(E)-2-benzylidene-2,3-dihydro-1H-inden-1-one
  参考文献：
  名称：

  光使能的，AlCl3催化的非亲核烷基向炔烃的区域选择性分子内亲核加成反应。

  摘要：

  报道了使用非亲核烷基作为亲核试剂的光活化的AlCl 3催化炔烃的区域选择性分子内亲核环化反应。光激发后，邻烷基苯基炔基酮可以转移到（E）-光烯醇中。因此，由非亲核烷基形成亲核亚甲基。AlCl 3催化剂可以稳定（E）-光烯醇中间体，并促进进一步的分子内亲核环化。DFT计算表明，AlCl 3催化的环化是区域选择性的决定步骤。

  DOI：

  10.1039/d0cc04636a

文献信息

• CATALYST FOR ASYMMETRIC HYDROGENATION AND METHOD FOR MANUFACTURING OPTICALLY ACTIVE CARBONYL COMPOUND USING THE SAME
  申请人：YAMADA Shinya

  公开号：US20120136176A1

  公开（公告）日：2012-05-31

  The present invention provides a catalyst used for manufacturing an optically active carbonyl compound by selective asymmetric hydrogenation of an α,β-unsaturated carbonyl compound, which is insoluble in a reaction mixture, and a method for manufacturing the corresponding optically active carbonyl compound. Particularly, the invention provides a catalyst for obtaining an optically active citronellal useful as a flavor or fragrance, by selective asymmetric hydrogenation of citral, geranial or neral. The invention relates to a catalyst for asymmetric hydrogenation of an α,β-unsaturated carbonyl compound, which comprises: a powder of at least one metal selected from metals belonging to Group 8 to Group 10 of the Periodic Table, or a metal-supported substance in which the at least one metal is supported on a support; an optically active peptide compound; and an acid, and also relates to a method for manufacturing an optically active carbonyl compound using the same.

  本发明提供了一种用于通过选择性不对称加氢α，β-不饱和羰基化合物制备光学活性羰基化合物的催化剂，该催化剂在反应混合物中不溶解，并提供了制备相应光学活性羰基化合物的方法。特别地，该发明提供了一种催化剂，通过选择性不对称加氢柠檬醛、香叶醛或柠檬醛制备出用作香料或芳香剂的光学活性香茅醛。该发明涉及一种用于不对称加氢α，β-不饱和羰基化合物的催化剂，包括：来自周期表第8至第10族金属中至少一种金属的粉末，或者至少一种金属负载物质，其中至少一种金属负载在一种载体上；一种光学活性肽化合物；和一种酸，还涉及使用该催化剂制备光学活性羰基化合物的方法。
• [EN] A METHOD FOR PREPARING SULFUR-CONTAINING COMPOUNDS<br/>[FR] PROCÉDÉ POUR LA PRÉPARATION DE COMPOSÉS CONTENANT DU SOUFRE
  申请人：ROYAL COLLEGE OF SURGEONS IE

  公开号：WO2010066450A1

  公开（公告）日：2010-06-17

  The invention provides a method for preparing sulfur-containing compounds, the method comprising reacting a donor compound comprising at least one sulfur having at least one lone pair of electrons, with an acceptor compound; wherein the reaction occurs in the presence of an amine, optionally an amine catalyst, capable of activating the sulfur having at least one lone pair of electrons; and wherein the reaction occurs via the formation of an transient intermediate species, optionally a transient intermediate species, between the amine, optionally the amine catalyst and the donor compound; and wherein the donor compound is selected from the group consisting of a sulfurous acid, a sulfenic acid and a sulfinic acid or a salt, ester or amide of a sulfurous acid, a sulfenic acid and a sulfinic acid. The invention also provides sulfur-containing compounds of the formula: wherein R is selected from: (a) 1 -(4-Nitro-phenyl)-3-oxo-3-phenyl-propane; (b) 2-(3-Methyl-4-nitro-isoxazol-5-yl)-1 -phenyl-ethane; (c) 1-(4-Methoxy-phenyl)-2-(3-methyl-4-nitro-isoxazol-5-yl)-ethane; (d) 2-(3-Methyl-4-nitro-isoxazol-5-yl)-1-(4-nitro-phenyl)-ethane; (e) 1-(4-Fluoro-phenyl)-2-(3-methyl-4-nitro-isoxazol-5-yl)-ethane; (f) 1 -(4-Chloro-phenyl)-2-(3-methyl-4-nitro-isoxazol-5-yl)-ethane; and (g) 3-Oxo-cyclohexane. Finally, the invention provides use of chiral sulfur-containing compounds obtainable by the above-mentioned method or chiral sulfur-containing compounds as mentioned above for the resolution of racemic mixtures of amines.

  该发明提供了一种制备含硫化合物的方法，该方法包括将包含至少一个硫原子且至少一个孤对电子的给体化合物与受体化合物反应；其中，在胺的存在下进行反应，可选地，在能够激活至少一个硫原子具有至少一个孤对电子的胺的存在下进行反应；反应通过形成瞬态中间体物种进行，可选地，通过胺、可选地胺催化剂和给体化合物之间的瞬态中间体物种进行反应；给体化合物选自包括亚硫酸、亚硫酸和亚砜酸或亚硫酸、亚硫酸和亚砜酸的盐、酯或酰胺的群；该发明还提供了符合以下公式的含硫化合物：其中R选自：(a) 1-(4-硝基苯基)-3-氧代-3-苯基-丙烷；(b) 2-(3-甲基-4-硝基异噁唑-5-基)-1-苯基-乙烷；(c) 1-(4-甲氧基苯基)-2-(3-甲基-4-硝基异噁唑-5-基)-乙烷；(d) 2-(3-甲基-4-硝基异噁唑-5-基)-1-(4-硝基苯基)-乙烷；(e) 1-(4-氟苯基)-2-(3-甲基-4-硝基异噁唑-5-基)-乙烷；(f) 1-(4-氯苯基)-2-(3-甲基-4-硝基异噁唑-5-基)-乙烷；和(g) 3-氧代环己烷。最后，该发明提供了通过上述方法获得的手性含硫化合物或上述提到的手性含硫化合物用于分离胺的外消旋混合物。
• Chiral Squaramide-Catalyzed Michael/­Alkylation Cascade Reaction for the Asymmetric Synthesis of Nitro-Spirocyclopropanes
  作者：Bo-Liang Zhao、Da-Ming Du

  DOI：10.1002/ejoc.201500533

  日期：2015.8

  diastereoselective and enantioselective cyclopropanation reaction has been developed by employing a Michael/alkylation cascade reaction between (E)-3-arylenechroman-4-one or (E)-2-arylideneindan-1-one derivatives and a bromonitroalkane with a chiral squaramide catalyst. This reaction constitutes a facile asymmetric synthesis for nitro-spirocyclopropanes that have three adjacent stereogenic centers, including

  通过在 (E)-3-arylenechroman-4-one 或 (E)-2-arylideneindan-1-one 衍生物和带有手性方酸酰胺的溴硝基烷烃之间进行迈克尔/烷基化级联反应，开发了一种新的非对映选择性和对映选择性环丙烷化反应催化剂。该反应构成了具有三个相邻立体中心（包括一个四元中心）的硝基-螺环丙烷的简便不对称合成，产率中等至良好（高达 90 %），具有出色的对映体 - [高达 > 99 % ee（对映体过量）]和非对映选择性 [高达 >99:1 dr（非对映比）]。
• Dichlororuthenium(IV) Complex ofmeso-Tetrakis(2,6-dichlorophenyl)porphyrin: Active and Robust Catalyst for Highly Selective Oxidation of Arenes, Unsaturated Steroids, and Electron-Deficient Alkenes by Using 2,6-DichloropyridineN-Oxide
  作者：Jun-Long Zhang、Chi-Ming Che

  DOI：10.1002/chem.200401008

  日期：2005.6.20

  under acid-free conditions, a wide variety of hydrocarbons including 1) cycloalkenes, conjugated enynes, electron-deficient alkenes (to afford epoxides), 2) arenes (to afford quinones), and 3) Delta5-unsaturated steroids, Delta4-3-ketosteroids, and estratetraene derivatives (to afford epoxide/ketone derivatives of steroids) in up to 99 % product yield within several hours with up to 100 % substrate conversion

  由[Ru（VI）（2,6-Cl2tpp）O2]与Me3SiCl的反应以90％的收率制备的[Ru（IV）（2,6-Cl2tpp）Cl2]是通过X射线晶体学表征的结构明显优于[Ru（IV）（tmp）Cl2]，[Ru（IV）（ttp）Cl2]和[Ru（II）（por）（CO）]（por = 2,6-Cl2tpp，F20-tpp ，F28-tpp）作为烯烃与2,6-Cl2pyNO（2,6-Cl2tpp = meso-tetrakis（2,6-dichlorophenyl）porphyrinato dianion; tmp = meso-tetramesitylporphyrinato dianion; ttp = meso-tetrakis（对甲苯基）卟啉二价阴离子; F20-tpp =间四（五氟苯基）卟啉二价阴离子; F28-tpp = 2,3,7,8,12,13,17,18-八氟-5,10,15
• CATALYST FOR ASYMMETRIC HYDROGENATION
  申请人：MAEDA Hironori

  公开号：US20100324338A1

  公开（公告）日：2010-12-23

  This invention aims at providing a catalyst for producing an optically active aldehyde or an optically active ketone, which is an optically active carbonyl compound, by carrying out selective asymmetric hydrogenation of an α,β-unsaturated carbonyl compound, particularly a catalyst which is insoluble in a reaction mixture for obtaining optically active citronellal which is useful as a flavor or fragrance, by carrying out selective asymmetric hydrogenation of citral, geranial or neral; and a method for producing a corresponding optically active carbonyl compound. The invention relates to a catalyst for asymmetric hydrogenation of an α,β-unsaturated carbonyl compound, which comprises a powder of at least one metal selected from metals belonging to Group 8 to Group 10 of the Periodic Table, or a metal-supported substance in which at least one metal selected from metals belonging to Group 8 to Group 10 of the Periodic Table is supported on a support, an optically active cyclic nitrogen-containing compound and an acid.

  这项发明旨在通过对α，β-不饱和羰基化合物进行选择性不对称加氢，特别是通过对柠檬醛、香叶醛或柠檬醛进行选择性不对称加氢，从而提供用作香料或香精的有用的光学活性香茅醛的催化剂，该香茅醛是一种光学活性羰基化合物；以及生产相应的光学活性羰基化合物的方法。该发明涉及一种用于不对称加氢α，β-不饱和羰基化合物的催化剂，其包括来自周期表第8至第10族金属中至少一种金属的粉末，或者至少一种来自周期表第8至第10族金属的金属负载物质，该金属负载在一种支撑物上，还包括光学活性的含氮环化合物和酸。

表征谱图