摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

(adamantan-1-yl)(phenyl)sulfane | 88459-01-2

中文名称
——
中文别名
——
英文名称
(adamantan-1-yl)(phenyl)sulfane
英文别名
(1-Adamantyl)phenylthioether;1-phenylsulfanyladamantane
(adamantan-1-yl)(phenyl)sulfane化学式
CAS
88459-01-2
化学式
C16H20S
mdl
——
分子量
244.401
InChiKey
WZPXPUUJRVISKT-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 熔点:
    71 °C(Solv: hexane (110-54-3))
  • 沸点:
    356.1±11.0 °C(Predicted)
  • 密度:
    1.14±0.1 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    5.1
  • 重原子数:
    17
  • 可旋转键数:
    2
  • 环数:
    5.0
  • sp3杂化的碳原子比例:
    0.62
  • 拓扑面积:
    25.3
  • 氢给体数:
    0
  • 氢受体数:
    1

反应信息

  • 作为反应物:
    描述:
    (adamantan-1-yl)(phenyl)sulfane(二氯碘)-苯 作用下, 以 二氯甲烷 为溶剂, 反应 0.08h, 以69%的产率得到1-氯金刚烷
    参考文献:
    名称:
    烷基苯硫醚的脱硫氯化
    摘要:
    报道了使用(二氯碘代)苯(PhICl 2)对易得的仲和叔烷基苯基硫化物进行氯化。这种温和而快速的亲核氯化作用扩展到了磺胺-迈克尔衍生的硫化物,从而以高收率提供了对消除敏感的β-氯羰基和硝基化合物。将对映体富集的苄基硫化物氯化为相应的倒置氯化物,其立体定向性很高,因此可以正式进入对映体富集的氯-迈克尔加合物。这意味着一个二氯λ的地层中的装置4提出-sulfurane中间。
    DOI:
    10.1021/acs.orglett.7b00077
  • 作为产物:
    描述:
    1-溴金刚烷三甲基氯硅烷 、 copper(I) cyanide di(lithium chloride) 、 magnesiumlithium chloride 作用下, 以 四氢呋喃1,2-二溴乙烷 为溶剂, 反应 4.0h, 生成 (adamantan-1-yl)(phenyl)sulfane
    参考文献:
    名称:
    在ZnCl 2存在下使用Mg插入合成取代的金刚烷锌试剂及进一步的功能化
    摘要:
    在ZnCl 2存在下通过LiCl介导的Mg插入可以从相应的官能化叔溴开始有效合成金刚烷基锌试剂。高反应性的金刚烷基锌类很容易经历各种各样的功能化,例如Negishi交叉偶联,Cu(I)催化的酰化和烯丙基化,以及1,4-加成反应,从而以预期的产率获得了预期的产物。此外,金刚烷基部分可以作为α-取代基引入对噻吩中,由于更高的亲脂性和防止π堆积而增加了其溶解度。
    DOI:
    10.1021/ol500781j
点击查看最新优质反应信息

文献信息

  • Syntheses of Sulfides and Selenides through Direct Oxidative Functionalization of C(sp<sup>3</sup>)–H Bond
    作者:Bingnan Du、Bo Jin、Peipei Sun
    DOI:10.1021/ol5011449
    日期:2014.6.6
    functionalization of the C(sp3)–H bond of alkanes under metal-free conditions was developed. Using tBuOOtBu as the oxidant, the reaction of disulfides or diselenides with alkanes gave sulfides or selenides in moderate to good yields. The method was very simple and atom-economical.
    通过在无金属条件下对烷烃的C(sp 3)-H键进行直接官能化,开发了一种C-S和C-Se键形成的新方案。使用t BuOO t Bu作为氧化剂,二硫化物或二硒化物与烷烃的反应以中等至良好的收率得到硫化物或硒化物。该方法非常简单且原子经济。
  • Radical reaction of S-phenyl chlorothioformate with alkyl iodides: free radical-mediated carboxylation approach
    作者:Sunggak Kim
    DOI:10.1039/a800664d
    日期:——
    Free radical-mediated carboxylation is achieved by treatment of alkyl iodides with S-phenyl chlorothioformate and bis(tributyltin) with irradiation at 300 nm.
    通过在300 nm波长照射下,使用S-苯基氯硫代甲酸酯和双(三丁基锡)处理烷基碘化物,实现了自由基介导的羧化反应。
  • Iron-Catalyzed C–C Single-Bond Cleavage of Alcohols
    作者:Wei Liu、Qiang Wu、Miao Wang、Yahao Huang、Peng Hu
    DOI:10.1021/acs.orglett.1c03137
    日期:2021.11.5
    An iron-catalyzed deconstruction/hydrogenation reaction of alcohols through C–C bond cleavage is developed through photocatalysis, to produce ketones or aldehydes as the products. Tertiary, secondary, and primary alcohols bearing a wide range of substituents are suitable substrates. Complex natural alcohols can also perform the transformation selectively. A investigation of the mechanism reveals a
    铁催化的醇通过 C-C 键断裂的解构/氢化反应通过光催化发展,以产生酮或醛作为产物。带有广泛取代基的叔醇、仲醇和伯醇是合适的底物。复杂的天然醇也可以选择性地进行转化。对该机制的研究揭示了在 2,4,6-可力丁的帮助下,氯自由基改善 O-H 均裂的过程。
  • A comparative study of Cu(II)-assisted vs Cu(II)-free chalcogenation on benzyl and 2°/3°-cycloalkyl moieties
    作者:SANTOSH K SAHOO
    DOI:10.1007/s12039-015-0981-0
    日期:2015.12
    A relative synthetic strategy toward intermolecular oxidative C −Chalcogen bond formation of alkanes has been illustrated using both Cu(II) assisted vs Cu(II) free conditions. This led to construction of a comparative study of hydrocarbon benzylic and 2∘/ 3∘-cycloalkyl moieties bond sulfenylation and selenation protocol by the chalcogen sources, particularly sulfur and selenium, respectively. In addition, this protocol disclosed the auspicious formation of sp3 C−S coupling products over leading the sp3 C−N coupling products by using 2-mercaptobenzothiazole (MBT) substrates.
    一种相对综合的策略已被阐述,用于烷烃分子间氧化性C-硫族元素键的形成,采用了Cu(II)辅助与无Cu(II)条件两种情况。这使得能够构建一个比较研究,针对烃的苄基与二/三元环烷基部分,通过硫族元素源(特别是硫和硒)来实现键的硫化与硒化。此外,这一方法揭示了使用2-巯基苯并噻唑(MBT)底物时,sp3 C-S偶联产物相较于sp3 C-N偶联产物的优势形成。
  • Copper-Catalyzed Intermolecular Functionalization of Unactivated C(sp<sup>3</sup>)–H Bonds and Aliphatic Carboxylic Acids
    作者:Runze Mao、Srikrishna Bera、Aurélya Christelle Turla、Xile Hu
    DOI:10.1021/jacs.1c05874
    日期:2021.9.15
    unactivated C(sp3)–H bonds and aliphatic carboxylic acids. The process is enabled by the trapping of alkyl radicals generated through hydrogen atom abstraction by arylsulfonyl-based SOMO-philes, which introduces a large array of C, N, S, Se, and halide-based functional groups. The chemoselectivity can be switched from C–H functionalization to decarboxylative functionalization by matching the bond dissociation
    C(sp 3 )–H 键和脂肪族羧酸的分子间官能化能够从容易获得的起始材料中有效合成高附加值的有机化合物。尽管已经为这种官能化开发了涉及氢原子转移的方法,但这些方法要么仅适用于活化的 C(sp 3 )-H 键,要么引入一组狭窄的官能团。在这里,我们描述了一种 Cu 催化的过程,用于两种未活化的 C(sp 3)–H 键和脂肪族羧酸。该过程是通过基于芳基磺酰基的 SOMO-philes 捕获通过氢原子提取产生的烷基自由基实现的,它引入了大量的 C、N、S、Se 和基于卤化物的官能团。通过将氢原子转移试剂的键解离能与目标 C-H 或 O-H 键的键解离能相匹配,可以将化学选择性从 C-H 官能化转变为脱羧官能化。
查看更多