p-[(but-3-enyl)oxy]aniline hydrochloride | 1404455-73-7

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯酚醚
• 英文名称: p-[(but-3-enyl)oxy]aniline hydrochloride
• 英文别名: p-(but-3-enyloxy)aniline hydrochloride
• CAS: 1404455-73-7
• 化学式: C₁₀H₁₃NO*ClH
• 分子量: 199.68
• InChiKey: ISZAMOXGMJMPGB-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  2.65
• 重原子数：
  13.0
• 可旋转键数：
  4.0
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.2
• 拓扑面积：
  35.25
• 氢给体数：
  1.0
• 氢受体数：
  2.0

反应信息

• 作为反应物：
  描述：

  p-[(but-3-enyl)oxy]aniline hydrochloride 、 2-hydroxy-3-(1-methyl-1-phenylethyl)benzaldehyde 在 三乙胺 作用下， 以 甲醇 为溶剂， 以89%的产率得到2-{[4-(but-3-enyl)oxyphenylimino]methyl}-6-(2-phenylpropan-2-yl)phenol
  参考文献：
  名称：

  芳烃型芳烃型后茂金属催化体系的设计：XV。含有丁-3-烯氧基的（N-芳基）水杨醛亚胺配体的合成及其与二氯化钛（IV）的配合物

  摘要：

  一系列的（ñ -芳基）水杨醛二胺通过水杨醛在位置取代反应合成3和5由笨重叔丁基或α枯基与盐酸的ø - ，间- ，和p - （丁-3-三乙胺存在下的苯氧基）苯胺。通过与二氯化钛（IV）L 2 TiCl 2的TiCl 2（OPr- i）2配合物反应形成了所获得的化合物。

  DOI：

  10.1134/s1070428013080095

文献信息

• Self-immobilized catalysts for ethylene polymerization based on various phenoxyimine titanium halide complexes
  作者：N. I. Ivancheva、D. V. Sanieva、S. P. Fedorov、I. V. Oleinik、I. I. Oleinik、G. A. Tolstikov、S. S. Ivanchev

  DOI：10.1007/s11172-012-0116-4

  日期：2012.4

  The kinetic features of ethylene polymerization on ten methylalumoxane-activated self-immobilized bis(phenoxyimine) complexes of titanium chloride of various structure containing oxyallyl functional groups were studied. The catalytic activity of the systems was determined in the temperature range 20–60 °C under ethylene pressure 0.4 MPa. The positions and structures of the oxyallyl group and substituents

  研究了乙烯在十种甲基铝氧烷活化的自固定化双(苯氧基亚胺)配合物上的乙烯聚合动力学特征，该络合物具有各种结构的含氧烯丙基官能团。该系统的催化活性在 20-60°C 的温度范围内和 0.4 MPa 的乙烯压力下测定。配合物的氧烯丙基和苯氧基中的取代基的位置和结构显着改变了基于这些配合物的催化体系的活性、催化剂在聚合物上的自固定速率以及分子量和分子量所得聚乙烯的分布。
• Multicentered self-immobilized ethylene polymerization catalysts based on functionalized titanium halide salicylaldiminate complexes for the synthesis of ultra-high-molecular-weight polyethylene
  作者：N. I. Ivancheva、S. Ya. Khaikin、E. V. Sviridova、S. P. Fedorov、D. V. Sanieva、O. V. Molev、I. V. Oleinik、S. S. Ivanchev

  DOI：10.1134/s1070427212090170

  日期：2012.9

  Specific features of ethylene polymerization using a new group of catalytic systems based on ten methylalumoxane-activated titanium halide salicylaldiminato complexes functionalized with omega-vinylalkoxy groups and containing tert-butyl substituents in the phenoxide moiety were studied. The catalytic activity of the new group of activated complexes is strongly affected by the position of the omega-vinylalkoxy functional group and by the number and position of substituents in the phenoxide moiety. These factors determine the ratio of the homogeneous and heterogeneous steps of the polymerization as a result of the catalyst self-immobilization onto the polymer formed, and also the molecular characteristics of the polymer obtained at 20, 40, and 60 degrees C and ethylene pressure of 0.4 MPa. The possibility and conditions of preparing ultra-high-molecular-weight polyethylene with improved morphology were revealed.