The MMT Bag for Emission Source Sampling: Design and Evaluation
摘要:
This paper presents the design and evaluation results for a metal-coated multilayer Tedlar (MMT) bag that was developed for the collection of source emissions. The applicability of the MMT bag was evaluated for a number of important greenhouse relevant gases: CO, CO2, CH4, N2O, and total hydrocarbons (THCs). The bag was tested for durability and stability for a range of concentrations of the tested compounds using both laboratory-prepared samples and real source samples. The results show that all tested compounds were more stable when stored in the MMT bag than when stored in a regular Tedlar bag. These compounds can be stored at room temperature for at least 3 months without significant changes in concentration. When properly packed, the MMT bag is durable and may be shipped by air. The MMT bag is lower in cost, lighter in weight, and easier to clean, and it requires less devices during the subsequent laboratory analysis compared with a stainless steel canister, which is often used to collect air and source samples.
A grading system was developed to rate the moisture damage profile of dwellings and to study the relationship between moisture-induced indoor air problems and occupant health. A total of 630 randomly selected houses and apartments, built between 1950 and 1989, were visually inspected. Moisture observations were standardized into three damage levels. Thus, a system to classify the homes into three grades was devised. The two grades of homes associated with the highest levels of damage were graded as index homes.Overall, 51% of the sample had some kind of moisture fault in them and one in every three homes (33%) was classified as an index home. The mean number of damage incidents in the index dwellings varied from 1.4 to 2.6. The mean number of damage incidents in the reference homes was 0.28. Prevalence of index dwellings was significantly higher (p < 0.01) in houses (38%) than in apartments (26%). There was no major difference in the prevalence of index buildings in houses built in any particular decade (30-35%). Moisture was observed in 28% of bathrooms, in 10% of kitchens, and in 17% of other spaces. Indoor relative humidity (RH) levels were low in most homes.