SECTION 1: Identification of the substance/mixture and of the company/undertaking Product identifiers Product name : 6-Iodo-Pyridine-2-Carboxylic Acid Methyl Ester : ADE000338 REACH No. : A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline. SECTION 2: Hazards identification Classification of the substance or mixture Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008. This substance is not classified as dangerous according to Directive 67/548/EEC. Label elements The product does not need to be labelled in accordance with EC directives or respective national laws. Other hazards This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. SECTION 3: Composition/information on ingredients Substances Molecular weight : 263,04 g/mol No components need to be disclosed according to the applicable regulations. SECTION 4: First aid measures Description of first aid measures If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. In case of skin contact Wash off with soap and plenty of water. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 Indication of any immediate medical attention and special treatment needed No data available SECTION 5: Firefighting measures Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Nature of decomposition products not known. Advice for firefighters Wear self-contained breathing apparatus for firefighting if necessary. Further information No data available SECTION 6: Accidental release measures Personal precautions, protective equipment and emergency procedures Avoid dust formation. Avoid breathing vapours, mist or gas. For personal protection see section 8. Environmental precautions No special environmental precautions required. Methods and materials for containment and cleaning up Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13. SECTION 7: Handling and storage Precautions for safe handling Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2.2. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Storage class (TRGS 510): Non Combustible Solids Specific end use(s) Apart from the uses mentioned in section 1.2 no other specific uses are stipulated SECTION 8: Exposure controls/personal protection Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls General industrial hygiene practice. Personal protective equipment Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure No special environmental precautions required. SECTION 9: Physical and chemical properties Information on basic physical and chemical properties a) Appearance Form: solid b) Odour No data available c) Odour Threshold No data available d) pH No data available e) Melting point/freezing No data available point f) Initial boiling point and No data available boiling range g) Flash point No data available h) Evaporation rate No data available i) Flammability (solid, gas) No data available j) Upper/lower No data available flammability or explosive limits k) Vapour pressure No data available l) Vapour density No data available m) Relative density No data available n) Water solubility No data available o) Partition coefficient: n- No data available octanol/water p) Auto-ignition No data available temperature q) Decomposition No data available temperature r) Viscosity No data available s) Explosive properties No data available t) Oxidizing properties No data available Other safety information No data available SECTION 10: Stability and reactivity Reactivity No data available Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions No data available Conditions to avoid No data available Incompatible materials No data available Hazardous decomposition products In the event of fire: see section 5 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity No data available Skin corrosion/irritation No data available Serious eye damage/eye irritation No data available Respiratory or skin sensitisation No data available Germ cell mutagenicity No data available Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. Reproductive toxicity No data available Specific target organ toxicity - single exposure No data available Specific target organ toxicity - repeated exposure No data available Aspiration hazard No data available Additional Information RTECS: Not available SECTION 12: Ecological information Toxicity No data available Persistence and degradability No data available Bioaccumulative potential No data available Mobility in soil No data available Results of PBT and vPvB assessment This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Other adverse effects No data available SECTION 13: Disposal considerations Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. SECTION 14: Transport information UN number ADR/RID: - IMDG: - IATA: - UN proper shipping name ADR/RID: Not dangerous goods IMDG: Not dangerous goods IATA: Not dangerous goods Transport hazard class(es) ADR/RID: - IMDG: - IATA: - Packaging group ADR/RID: - IMDG: - IATA: - Environmental hazards ADR/RID: no IMDG Marine pollutant: no IATA: no Special precautions for user No data available SECTION 15: Regulatory information This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006. Safety, health and environmental regulations/legislation specific for the substance or mixture No data available Chemical Safety Assessment
A class of effective decarboxylative perfluoroalkylating reagents: [(phen)<sub>2</sub>Cu](O<sub>2</sub>CR<sub>F</sub>)
作者:Yangjie Huang、Manjaly J. Ajitha、Kuo-Wei Huang、Zhongxing Zhang、Zhiqiang Weng
DOI:10.1039/c6dt00277c
日期:——
[(phen)2Cu](O2CRF) (1) for the decarboxylative perfluoroalkylation of aryl and heteroaryl halides. Treatment of copper tert-butyloxide with phenanthroline ligands, with subsequent addition of perfluorocarboxylic acids afforded air-stable copper(I) perfluorocarboxylato complexes 1. These complexes reacted with a variety of aryl and heteroaryl halides to form perfluoroalkyl(hetero)arenes in moderate to high
[EN] CHEMICAL COMPOUNDS, COMPOSITIONS AND METHODS FOR KINASE MODULATION<br/>[FR] COMPOSÉS CHIMIQUES, COMPOSITIONS ET PROCÉDÉS POUR MODULATION DE KINASES
申请人:INTELLIKINE INC
公开号:WO2011146882A1
公开(公告)日:2011-11-24
Chemical compounds that modulate kinase activity, including PI3 kinase activity, and chemical compounds, pharmaceutical compositions, and methods of treatment of diseases and conditions associated with kinase activity, including PI3 kinase activity, are described herein.
Exploring the Role of Coinage Metalates in Trifluoromethylation: A Combined Experimental and Theoretical Study
作者:Sara Martínez de Salinas、Ángel L. Mudarra、Carlota Odena、Marta Martínez Belmonte、Jordi Benet‐Buchholz、Feliu Maseras、Mónica H. Pérez‐Temprano
DOI:10.1002/chem.201900496
日期:2019.7.17
nucleophilic nature of [M(CF3)2]− (M=Cu, Ag, Au) complexes, their participation in trifluoromethylation reactions of aryl halides remains unexplored. Here, for the first time, selective access to a [Cu(CF3)2]− species is reported, which is ubiquitous in Cu‐mediated trifluoromethylations, and we rationalize its complex mechanistic scenario as well as its behavior compared to its silver and gold congeners through
This invention discloses novel gamma secretase inhibitors of the formula:
1
wherein:
R
1
is a substituted aryl or substituted heteroaryl group;
R
2
is an R
1
group, alkyl, —XC(O)Y, alkylene-XC(O)Y, cycloalkylene-X-C(O)—Y, —CH—X—C(O)—NR
3
—Y or —CH—X—C(O)—Y, wherein X and Y are as defined herein;
each R
3
and each R
3A
are independently H, or alkyl;
R
11
is aryl, heteroaryl, alkyl, cycloalkyl, arylalkyl, arylcycloalkyl, heteroarylalkyl, heteroarylcycloalkyl, arylheterocycloalkyl, or alkoxyalkyl. Also disclosed is a method of treating Alzheimer's Disease using one or more compounds of the invention.
[EN] CHEMICAL ENTITIES AND THERAPEUTIC USES THEREOF<br/>[FR] ENTITÉS CHIMIQUES ET LEURS UTILISATIONS THÉRAPEUTIQUES
申请人:INTELLIKINE INC
公开号:WO2009046448A1
公开(公告)日:2009-04-09
Certain chemical entities that modulate PI3 kinase activity, and chemical entities, pharmaceutical compositions, and methods of treatments of diseases and conditions associated with PB kinase activity are described.