摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

bis(2,4,6-trimethylphenyl) selenide | 142073-25-4

中文名称
——
中文别名
——
英文名称
bis(2,4,6-trimethylphenyl) selenide
英文别名
1,3,5-Trimethyl-2-(2,4,6-trimethylphenyl)selanylbenzene
bis(2,4,6-trimethylphenyl) selenide化学式
CAS
142073-25-4
化学式
C18H22Se
mdl
——
分子量
317.333
InChiKey
ZZQWPESWWIBZIR-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 熔点:
    178 °C(Solv: dichloromethane (75-09-2); methanol (67-56-1))
  • 沸点:
    397.6±42.0 °C(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    3.19
  • 重原子数:
    19
  • 可旋转键数:
    2
  • 环数:
    2.0
  • sp3杂化的碳原子比例:
    0.33
  • 拓扑面积:
    0
  • 氢给体数:
    0
  • 氢受体数:
    0

反应信息

  • 作为反应物:
    描述:
    bis(2,4,6-trimethylphenyl) selenidehypofluorous acid acetonitrile complex 作用下, 以 二氯甲烷 为溶剂, 反应 0.17h, 以85%的产率得到dimesityl selenone
    参考文献:
    名称:
    一种利用HOF·CH3CN将硒化物转化为硒酮的通用有效方法
    摘要:
    介绍了制备硒酮 (R2SeO2) 的一般路线。该任务是通过硒化物 (R2Se) 与 HOF·CH3CN 的快速和高产率反应来实现的。该反应耐受一些难以捉摸的缺电子和空间位阻硒化物。一些机械方面也进行了调查和讨论。
    DOI:
    10.1002/ejoc.201300694
  • 作为产物:
    描述:
    2,4,6-trimethylphenyl diazonium chloride 在 disodium diselenide 作用下, 以 为溶剂, 生成 bis(2,4,6-trimethylphenyl) selenide
    参考文献:
    名称:
    Structural studies on diaryl selenide dihalides in solution: molecular complex formation of substituted diphenyl selenides with bromine
    摘要:
    通过调节二苯基硒化物(1)中硒原子的有效电负性以及硒原子周围的立体环境,并在 2、3 和/或 4 位上添加各种取代基,制备出了能与溴生成分子络合物(MC)的二芳基硒化物。研究了卤素诱导的二芳基硒化物的 1H 和 13C NMR 化学位移。结果表明,硒化物的氯加合物和碘加合物分别是三叉双金字塔加合物(TB)和 MC。就溴加合物而言,如果 Y 是 CN 和 NO2,则 (3- 和 4-YC6H4)2SeBr2 的结构被证明是 MC 型,这与一般规则相反:如果 Y 的吸电子性小于乙氧羰基,则它们是 TB 型。CN 和 NO2 基团增加了 (3- 和 4-YC6H4)2Se 中 Se 原子的有效电负性,与溴一起不会产生 TB。1 中所有元位置上的四个氯基对 MC 的形成也很有效。但 3,5-(O2N)2C6H3SeBr2Ph 是 TB。Ab initio MO 计算显示,(3-O2NC6H4)2Se 和 3,5-(O2N)2C6H3SePh 的结构分别接近 C2 和 Cs 对称性,这表明在确定溴加合物的结构时,构象变化也很重要。形成 TB 时的立体拥塞一定比形成 MC 时更为严重。2,6-Cl2C6H3SeBr2C6H4Y-p(Y = H 和 Br)的结构为 MC,这表明 2,6-Cl2C6H3 基团的立体效应对 MC 的形成是有效的。(2-MeC6H4)2SeBr2和(2-ClC6H4)2SeBr2分别是TB和MC:由于Me和Cl基团的体积预计相似,因此Cl基团的电子效应一定在MC形成过程中起到了额外的作用。(2,4,6-Me3C6H2)2Se的溴加合物也被断定为 MC:位于正交位置的四个 Me 基团的立体效应大到足以与溴形成 MC。二芳基硒化物的氧化电位(Eox)很好地解释了溴加合物的结构:电子效应与 Eox 直接相关,而立体效应的重要性则因 Eox 而凸显出来。MO 计算的结果支持观察到的轮廓。我们还详细讨论了一些卤素加合物的结构行为,如 2,6-Cl2C6H3SeCl2C6H4Y-p(TB:Y = H 和 Br)。
    DOI:
    10.1039/b108556e
点击查看最新优质反应信息

文献信息

  • Simple and efficient copper-catalyzed synthesis of symmetrical diaryl selenides from triarylbismuthanes and selenium under aerobic conditions
    作者:Mio Matsumura、Hanae Kumagai、Yuki Murata、Naoki Kakusawa、Shuji Yasuike
    DOI:10.1016/j.jorganchem.2016.02.006
    日期:2016.4
    Symmetrical diaryl selenides were synthesized in moderate-to-excellent yields by Cu-catalyzed C(aryl)Se bond formation followed by the reaction of triarylbismuthanes with elemental Se in the presence of Cu(OAc)2 and 1,10-phenanthroline (10 mol%) under aerobic conditions. This reaction proceeded efficiently: All the aryl groups on Bi were transferred to the coupling products.
    对称的二芳基化物通过Cu催化的C(芳基)Se键形成,然后在Cu(OAc)2和1,10-咯啉(10 mol %)在有氧条件下。该反应有效地进行:Bi上的所有芳基都转移到偶联产物上。
  • Cyclopalladation of dimesityl selenide: synthesis, reactivity, structural characterization, isolation of an intermediate complex with C–H⋯Pd intra-molecular interaction and computational studies
    作者:Siddhartha Kolay、Amey Wadawale、Dasarathi Das、Hemanta K. Kisan、Raghavan B. Sunoj、Vimal K. Jain
    DOI:10.1039/c3dt50935d
    日期:——
    The reaction of dimesityl selenide (Mes2Se) with either PdCl2(PhCN)2 in toluene or PdCl2 in toluene–acetonitrile yields a chloro-bridged binuclear palladium complex, [Pd2Cl2(μ-Cl)2(Mes2Se)2] (1), whereas with Na2PdCl4 in refluxing ethanol, a cyclometallated palladium complex, [Pd2(μ-Cl)2MesSeC6H2(Me2)CH2}2] (2) is afforded. 2 can also be obtained when 1 is refluxed in ethanol. On treatment with Pb(Epy)2 in dichloromethane, 2 afforded the Epy-bridged binuclear complexes, [Pd2(μ-Epy)2MesSeC6H2(Me2)CH2}2] (3; E = S (3a) or Se (3b)). Treatment of 2 with PPh3 yields a bridge-cleaved monomeric complex, [PdClMesSeC6H2(Me2)CH2}(PPh3)]. The molecular structures of 1–3 were established by X-ray diffraction analyses. All the complexes are dimeric, with the palladium atoms acquiring a distorted square planar configuration. There are intra-molecular C–H⋯Pd interactions (dM–H: 2.75 Å and
    甲苯化物 (Mes2Se) 与甲苯中的 PdCl2(PhCN)2 或甲苯乙腈中的 PdCl2 反应生成桥双核络合物,[Pd2Cl2(μ-Cl)2(Mes2Se)2] (1),而在回流乙醇中使用Na2PdCl4,则得到环属化络合物[Pd2(μ-Cl)2MesSeC6H2(Me2)CH2}2] (2)。当1在乙醇中回流时也可以获得2。在二氯甲烷中用 Pb(Epy)2 处理后,2 得到 Epy 桥联双核配合物,[Pd2(μ-Epy)2MesSeC6H2(Me2) }2] (3; E = S (3a) 或 Se (3b) ))。用 PPh3 处理 2 产生桥断单体复合物 [PdClMesSeC6H2(Me2) }(PPh3)]。通过X射线衍射分析确定了1~3的分子结构。所有配合物都是二聚体,原子获得扭曲的方形平面构型。 1 中存在分子内 C–H–Pd 相互作用(dM–H:2.75 × 和 金属化的键。使用 DFT(B3LYP) 计算方法获得的 1 的优化几何形状确定 C–H–Pd 接触距离为 2.78 ×。晶胞中有两个独立的2分子,其键长、键角和扭转角略有不同。使用 DFT (B3LYP) 计算检查二聚体 2 的形成机制。
  • Effects of heat treatment and sintering additives on thermal conductivity and electrical resistivity in fine-grained SiC ceramics
    作者:Guo-Dong Zhan、Mamoru Mitomo、Amiya K. Mukherjee
    DOI:10.1557/jmr.2002.0341
    日期:2002.9

    The effects of heat treatment and sintering additives on the thermal conductivity and electrical resistivity of fine-grained SiC materials were investigated. The thermal conductivity and the electrical resistivity of dense SiC materials were measured at room temperature by a laser flash technique and a current-voltage method, respectively. The results indicated that the thermal conductivity and electrical resistivity of the SiC materials were dependent on the sintering additives and the resultant microstructure. Annealed materials with oxide additives developed microstructures consisting of elongated grains of various α/β–SiC polytypes. In contrast, annealed materials with oxynitride additives had microstructures consisting of fine equiaxed grains entirely of β–SiC phase. For the annealed materials with oxide additives the observed thermal conductivity was over 110 W/mK. For the annealed materials with oxynitride additives the observed value was 47 W/mK. The electrical resistivity of a hot-pressed material with oxide sintering additives decreased after annealing. For annealed materials with oxynitride additives, the electrical resistivity was even lower. High-resolution electron microscopy revealed a thin amorphous phase along the grain boundaries. Energy dispersive x-ray spectroscopy results showed that there was segregation of both Al and O atoms and a very small amount of Y atoms at grain boundaries. The results indicated that the chemistry and structure of the grain boundary has significant influence on thermal and electrical properties in SiC.

    研究了热处理和烧结添加剂对细粒度碳化材料热导率和电阻率的影响。采用激光闪光技术和电流电压法分别测量了致密碳化材料在室温下的热导率和电阻率。结果表明,SiC 材料的热导率和电阻率取决于烧结添加剂和由此产生的微观结构。含有氧化物添加剂的退火材料形成了由不同 α/β-SiC 聚合物类型的细长晶粒组成的微观结构。相比之下,含有氮氧化物添加剂的退火材料的微观结构则由完全由 β-SiC 相组成的细小等轴晶粒构成。对于含有氧化物添加剂的退火材料,观察到的热导率超过 110 W/mK。对于含有氮氧化物添加剂的退火材料,观测值为 47 W/mK。使用氧化物烧结添加剂的热压材料在退火后电阻率下降。而含有氮氧化物添加剂的退火材料的电阻率则更低。高分辨率电子显微镜显示,沿晶界有一层薄薄的无定形相。能量色散 X 射线光谱分析结果表明,在晶界处存在 Al 原子和 O 原子以及极少量 Y 原子的偏析。结果表明,晶界的化学和结构对碳化的热性能和电性能有重大影响。
  • Radical cyclization of alkynyl aryl ketones for the synthesis of 3-seleno-substituted thiochromones and chromones
    作者:Ricardo H. Bartz、Krigor B. Silva、Thiago J. Peglow、Angelita M. Barcellos、Raquel G. Jacob、Eder J. Lenardão、Gelson Perin
    DOI:10.1039/d2ob01762h
    日期:——
    ones and 3-organylselanylchromones via the radical cyclization reaction between alkynyl aryl ketones containing an ortho-thiopropyl/methoxy group and diorganyl diselenides promoted by Oxone®. This method allows the construction and seleno-functionalization of thiochromones and chromones using Oxone® as a stable and non-hazardous oxidizing agent in the presence of CH3CN at 82 °C. These reactions tolerate
    我们报告了一种通过含有邻代丙基/甲氧基的炔基芳基酮与 Oxone® 促进的二有机基二化物之间的自由基环化反应直接合成 3-有机基色酮和 3-有机基色酮的策略。该方法允许在CH 3存在下使用 Oxone® 作为稳定且无害的氧化剂来构建和代官能化色酮色酮CN 在 82 °C。这些反应可容忍各种取代基,并允许合成 21 种新的 3-有机基色酮色酮,产率从高到高 (55–95%)。此外,所开发的方法证明适用于放大(3.0 mmol,80%),并且所制备化合物的合成有效性在 2-phenyl-3-(phenylselanyl)-4 H -thiochromen-4的氧化中得到证明-一。
  • Synthesis of 3-chalcogenyl-indoles mediated by the safer reagent urea-hydrogen peroxide (UHP)
    作者:Julia Rosa Menezes、Mylena Mendes Gularte、Fabiola Caldeira dos Santos、Juliano Alex Roehrs、Juliano Braun Azeredo
    DOI:10.1016/j.tetlet.2023.154446
    日期:2023.3
    use of urea-hydrogen peroxide (UHP) as an oxidizing agent in the direct C3 chalcogenylation of indoles with diorganyl dichalcogenides, in the presence of an iodine source. This reagent provided a simple, efficient and safer reaction media, besides avoid problems related to the aqueous solutions oxidants. This method allowed the preparation of 20 compounds in good to excellent yields, being efficient
    在此,我们报告了在源存在下,使用-过氧化氢 (UHP) 作为氧化剂,在吲哚与二有机基二属化物的直接 C3 属基化反应中的应用。该试剂提供了一种简单、高效和安全的反应介质,同时避免了与溶液氧化剂相关的问题。这种方法允许以良好到极好的收率制备20 种化合物,在大规模生产中也很有效。
查看更多

同类化合物

(βS)-β-氨基-4-(4-羟基苯氧基)-3,5-二碘苯甲丙醇 (S,S)-邻甲苯基-DIPAMP (S)-(-)-7'-〔4(S)-(苄基)恶唑-2-基]-7-二(3,5-二-叔丁基苯基)膦基-2,2',3,3'-四氢-1,1-螺二氢茚 (S)-盐酸沙丁胺醇 (S)-3-(叔丁基)-4-(2,6-二甲氧基苯基)-2,3-二氢苯并[d][1,3]氧磷杂环戊二烯 (S)-2,2'-双[双(3,5-三氟甲基苯基)膦基]-4,4',6,6'-四甲氧基联苯 (S)-1-[3,5-双(三氟甲基)苯基]-3-[1-(二甲基氨基)-3-甲基丁烷-2-基]硫脲 (R)富马酸托特罗定 (R)-(-)-盐酸尼古地平 (R)-(-)-4,12-双(二苯基膦基)[2.2]对环芳烷(1,5环辛二烯)铑(I)四氟硼酸盐 (R)-(+)-7-双(3,5-二叔丁基苯基)膦基7''-[((6-甲基吡啶-2-基甲基)氨基]-2,2'',3,3''-四氢-1,1''-螺双茚满 (R)-(+)-7-双(3,5-二叔丁基苯基)膦基7''-[(4-叔丁基吡啶-2-基甲基)氨基]-2,2'',3,3''-四氢-1,1''-螺双茚满 (R)-(+)-7-双(3,5-二叔丁基苯基)膦基7''-[(3-甲基吡啶-2-基甲基)氨基]-2,2'',3,3''-四氢-1,1''-螺双茚满 (R)-(+)-4,7-双(3,5-二-叔丁基苯基)膦基-7“-[(吡啶-2-基甲基)氨基]-2,2”,3,3'-四氢1,1'-螺二茚满 (R)-3-(叔丁基)-4-(2,6-二苯氧基苯基)-2,3-二氢苯并[d][1,3]氧杂磷杂环戊烯 (R)-2-[((二苯基膦基)甲基]吡咯烷 (R)-1-[3,5-双(三氟甲基)苯基]-3-[1-(二甲基氨基)-3-甲基丁烷-2-基]硫脲 (N-(4-甲氧基苯基)-N-甲基-3-(1-哌啶基)丙-2-烯酰胺) (5-溴-2-羟基苯基)-4-氯苯甲酮 (5-溴-2-氯苯基)(4-羟基苯基)甲酮 (5-氧代-3-苯基-2,5-二氢-1,2,3,4-oxatriazol-3-鎓) (4S,5R)-4-甲基-5-苯基-1,2,3-氧代噻唑烷-2,2-二氧化物-3-羧酸叔丁酯 (4S,4''S)-2,2''-亚环戊基双[4,5-二氢-4-(苯甲基)恶唑] (4-溴苯基)-[2-氟-4-[6-[甲基(丙-2-烯基)氨基]己氧基]苯基]甲酮 (4-丁氧基苯甲基)三苯基溴化磷 (3aR,8aR)-(-)-4,4,8,8-四(3,5-二甲基苯基)四氢-2,2-二甲基-6-苯基-1,3-二氧戊环[4,5-e]二恶唑磷 (3aR,6aS)-5-氧代六氢环戊基[c]吡咯-2(1H)-羧酸酯 (2Z)-3-[[(4-氯苯基)氨基]-2-氰基丙烯酸乙酯 (2S,3S,5S)-5-(叔丁氧基甲酰氨基)-2-(N-5-噻唑基-甲氧羰基)氨基-1,6-二苯基-3-羟基己烷 (2S,2''S,3S,3''S)-3,3''-二叔丁基-4,4''-双(2,6-二甲氧基苯基)-2,2'',3,3''-四氢-2,2''-联苯并[d][1,3]氧杂磷杂戊环 (2S)-(-)-2-{[[[[3,5-双(氟代甲基)苯基]氨基]硫代甲基]氨基}-N-(二苯基甲基)-N,3,3-三甲基丁酰胺 (2S)-2-[[[[[((1S,2S)-2-氨基环己基]氨基]硫代甲基]氨基]-N-(二苯甲基)-N,3,3-三甲基丁酰胺 (2S)-2-[[[[[[((1R,2R)-2-氨基环己基]氨基]硫代甲基]氨基]-N-(二苯甲基)-N,3,3-三甲基丁酰胺 (2-硝基苯基)磷酸三酰胺 (2,6-二氯苯基)乙酰氯 (2,3-二甲氧基-5-甲基苯基)硼酸 (1S,2S,3S,5S)-5-叠氮基-3-(苯基甲氧基)-2-[(苯基甲氧基)甲基]环戊醇 (1S,2S,3R,5R)-2-(苄氧基)甲基-6-氧杂双环[3.1.0]己-3-醇 (1-(4-氟苯基)环丙基)甲胺盐酸盐 (1-(3-溴苯基)环丁基)甲胺盐酸盐 (1-(2-氯苯基)环丁基)甲胺盐酸盐 (1-(2-氟苯基)环丙基)甲胺盐酸盐 (1-(2,6-二氟苯基)环丙基)甲胺盐酸盐 (-)-去甲基西布曲明 龙蒿油 龙胆酸钠 龙胆酸叔丁酯 龙胆酸 龙胆紫-d6 龙胆紫