1-苄基-2-氯甲基-咪唑盐酸盐 | 19276-03-0

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 1-苄基-2-氯甲基-咪唑盐酸盐
• 中文别名: 1-苄基-2-氯甲基-1H-咪唑盐酸盐；尼唑苯酮中间体2
• 英文名称: 1-Benzyl-2-chloromethylimidazole hydrochloride
• 英文别名: 1-(phenylmethyl)-2-chloromethyl-1H-imidazole monohydrochloride；1-benzyl-2-(chloromethyl)-1H-imidazole hydrochloride；1-benzyl-1H-imidazol-2-ylmethylchloride hydrochloride；2-chloromethyl-1-benzyl-1H-imidazole hydrochloride；1-Benzyl-2-chlormethyl-1H-imidazol; Hydrochlorid；1-phenylmethyl-2-chloromethyl-imidazole hydrochloride；1-benzyl-2-(chloromethyl)-1H-imidazol-3-ium chloride；1-benzyl-2-chloromethyl-1H-imidazole hydrochloroide；1-benzyl-imidazol-2-ylmethylchloride hydrochloride；2-(chloromethyl)-1-(phenylmethyl)-1H-imidazole hydrochloride；3-benzyl-2-(chloromethyl)-1H-imidazol-3-ium;chloride
• CAS: 19276-03-0
• 化学式: C₁₁H₁₁ClN₂*ClH
• mdl: MFCD00035210
• 分子量: 243.136
• InChiKey: IOOCHXMDSFPOGL-UHFFFAOYSA-N

物化性质

• 熔点：
  186 °C

计算性质

• 辛醇/水分配系数(LogP)：
  2.46
• 重原子数：
  15
• 可旋转键数：
  3
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.181
• 拓扑面积：
  16.8
• 氢给体数：
  1
• 氢受体数：
  2

安全信息

• 危险品标志：
  Xi
• 安全说明：
  S26,S36/37/39
• 危险类别码：
  R36/37/38
• 海关编码：
  2933290090

SDS

Name:	1-Benzyl-2-(chloromethyl)-1h-imidazole hydrochloride 97% Material Safety Data Sheet
Synonym:	None Known
CAS:	19276-03-0

Section 1 - Chemical Product MSDS Name:1-Benzyl-2-(chloromethyl)-1h-imidazole hydrochloride 97% Material Safety Data Sheet
Synonym:None Known

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
19276-03-0	1-Benzyl-2-(chloromethyl)-1H-imidazole	97%	unlisted

Hazard Symbols: XI
Risk Phrases: 36/37/38

---

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Irritating to eyes, respiratory system and skin.
Potential Health Effects
Eye:
Causes eye irritation. May cause chemical conjunctivitis.
Skin:
Causes skin irritation. May be harmful if absorbed through the skin.
Ingestion:
May cause irritation of the digestive tract. May be harmful if swallowed.
Inhalation:
Causes respiratory tract irritation. May be harmful if inhaled. Can produce delayed pulmonary edema.
Chronic:
No information found.

---

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water. Wash mouth out with water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:
Treat symptomatically and supportively.

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use water spray, dry chemical, carbon dioxide, or chemical foam.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

---

Section 7 - HANDLING and STORAGE
Handling:
Minimize dust generation and accumulation. Avoid breathing dust, vapor, mist, or gas. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation. Use with adequate ventilation. Wash clothing before reuse.
Storage:
Store in a cool, dry place. Store in a tightly closed container.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 19276-03-0: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 192 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C11H12Cl2N2
Molecular Weight: 243

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
Dust generation.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, nitrogen oxides, carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 19276-03-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-Benzyl-2-(chloromethyl)-1H-imidazole hydrochloride - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
No information available.
IMO
No information available.
RID/ADR
No information available.

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XI
Risk Phrases:
R 36/37/38 Irritating to eyes, respiratory system
and skin.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 37/39 Wear suitable gloves and eye/face
protection.
WGK (Water Danger/Protection)
CAS# 19276-03-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 19276-03-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 19276-03-0 is not listed on the TSCA inventory.
It is for research and development use only.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-苄基-2-氯甲基-咪唑盐酸盐 在 sodium ethanolate 作用下， 以 乙醇 为溶剂， 生成 1-苄基-2-(氯甲基)-1H-咪唑
  参考文献：
  名称：

  Method for the treatment of CNS disorders with substituted 2-imidazoles or imidazole derivatives

  摘要：

  本发明涉及一种治疗抑郁症、焦虑症、双相情感障碍、注意力缺陷多动障碍、压力相关障碍、精神分裂症等精神障碍、帕金森病等神经系统疾病、阿尔茨海默病等神经退行性疾病、癫痫、偏头痛、高血压、物质滥用、进食障碍、糖尿病、糖尿病并发症、肥胖症、血脂异常、能量消耗和吸收障碍、体温稳态障碍、睡眠和昼夜节律障碍以及心血管疾病的方法，包括向个体施用化合物I的治疗有效量，其中R、R1、R2、A和n如规范中所定义，以及其药用活性盐。该发明还涉及化合物I的新颖化合物、含有它们的药物组合物以及它们的制备方法。

  公开号：

  US20070197621A1
• 作为产物：
  描述：

  (1-苄基-1H-咪唑-2-基)甲醇盐酸盐 在 氯化亚砜 作用下， 反应 0.5h， 生成 1-苄基-2-氯甲基-咪唑盐酸盐
  参考文献：
  名称：

  Synthesis of Imidazo[1,2-a]pyridines from 1-(2-Alkynyl)-2-aminomethylimidazoles

  摘要：

  DOI：

  10.1055/s-1982-30092

文献信息

• Inhibitors of aspartyl protease
  申请人：Vertex Pharmaceuticals Incorporated.

  公开号：US20040122000A1

  公开（公告）日：2004-06-24

  The present invention relates to a novel class of sulfonamides which are aspartyl protease inhibitors. In one embodiment, this invention relates to a novel class of HIV aspartyl protease inhibitors characterized by specific structural and physicochemical features. This invention also relates to pharmaceutical compositions comprising these compounds. The compounds and pharmaceutical compositions of this invention are particularly well suited for inhibiting HIV-1 and HIV-2 protease activity and consequently, may be advantageously used as anti-viral agents against the HIV-1 and HIV-2 viruses. This invention also relates to methods for inhibiting the activity of HIV aspartyl protease using the compounds of this invention and methods for screening compounds for anti-HIV activity.

  本发明涉及一类新型磺胺类化合物，其为天冬氨酸蛋白酶抑制剂。在一个实施例中，本发明涉及一类新型HIV天冬氨酸蛋白酶抑制剂，其具有特定的结构和理化特征。本发明还涉及包含这些化合物的药物组合物。本发明的化合物和药物组合物特别适用于抑制HIV-1和HIV-2蛋白酶活性，因此，可以有利地用作抗HIV-1和HIV-2病毒的抗病毒剂。本发明还涉及使用本发明的化合物抑制HIV天冬氨酸蛋白酶活性的方法以及筛选具有抗HIV活性的化合物的方法。
• Anti-infective agents
  申请人：——

  公开号：US20040162285A1

  公开（公告）日：2004-08-19

  Compounds having the formula 1 are hepatitis C(HCV) polymerase inhibitors. Also disclosed are a composition and method for inhibiting hepatitis C(HCV) polymerase, processes for making the compounds, and synthetic intermediates employed in the processes.

  具有公式1的化合物是丙型肝炎病毒（HCV）聚合酶抑制剂。还公开了一种用于抑制丙型肝炎病毒（HCV）聚合酶的组成和方法，用于制造这些化合物的过程，以及在这些过程中使用的合成中间体。
• Metalloproteinase inhibitors, pharmaceutical compositions containing
  申请人：Agouron Pharmaceuticals, Inc.

  公开号：US05985900A1

  公开（公告）日：1999-11-16

  Compounds of the formula I: ##STR1## wherein Y is O or S, Ar is an aryl group or a heteroaryl group, R is H, an alkyl group, a cycloalkyl group, a heterocycloalkyl group, an aryl group, a heteroaryl group, or --C(O)R.sub.1, wherein R.sub.1 is hydrogen, an alkyl group, a cycloalkyl group, a heterocycloalkyl group, an aryl group, a heteroaryl group, or NR.sub.2 R.sub.3, wherein R.sub.2 and R.sub.3 independently are hydrogen, an alkyl group, a cycloalkyl group, a heterocycloalkyl group, an aryl group, or a heteroaryl group, and X is --NH--OH or --OH. Pharmaceutically acceptable prodrugs, salts and solvates of these compounds. Methods of inhibiting the activity of metalloproteinases by administering a compound of the formula I or a prodrug, salt of solvate thereof. Pharmaceutical compositions comprising an effective amount of these compounds, prodrugs, salts, and solvates.

  公式I的化合物：##STR1## 其中Y是O或S，Ar是芳基团或杂芳基团，R是H，烷基团，环烷基团，杂环烷基团，芳基团，杂芳基团或--C(O)R.sub.1，其中R.sub.1是氢，烷基团，环烷基团，杂环烷基团，芳基团，杂芳基团或NR.sub.2 R.sub.3，其中R.sub.2和R.sub.3独立的是氢，烷基团，环烷基团，杂环烷基团，芳基团或杂芳基团，X是--NH--OH或--OH。这些化合物的药物可接受的的前药，盐和溶剂化物。通过管理公式I的化合物或前药，盐或溶剂化物抑制金属蛋白酶活性的方法。包含有效量的这些化合物，前药，盐和溶剂化物的药物组合物。
• Substituted 4-(1H-benzimidazol-2-yl-amino)piperidines useful for the treatment of allergic diseases
  申请人：Aventis Pharmaceuticals Inc.

  公开号：US06211199B1

  公开（公告）日：2001-04-03

  The present invention relates to novel substituted piperidine derivatives of formula (1), stereoisomers thereof, and pharmaceutically acceptable salts thereof which are useful as histamine receptor antagonists and tachykinin receptor antagonist. Such antagonists are useful in the treatment of allergic rhinitis, including seasonal rhinitis and sinusitis; inflammatory bowel diseases, including Crohn's disease and ulcerative colitis; asthma; bronchitis; and emesis.

  本发明涉及一种新型的取代哌啶衍生物，其化学式为（1），其立体异构体以及药学上可接受的盐，这些衍生物可用作组胺受体拮抗剂和速激肽受体拮抗剂。这些拮抗剂在过敏性鼻炎的治疗中很有用，包括季节性鼻炎和鼻窦炎；炎症性肠病，包括克罗恩病和溃疡性结肠炎；哮喘；支气管炎；以及呕吐。
• Chelation-Assisted, Copper(II)-Acetate-Accelerated Azide−Alkyne Cycloaddition
  作者：Gui-Chao Kuang、Heather A. Michaels、J. Tyler Simmons、Ronald J. Clark、Lei Zhu

  DOI：10.1021/jo101305m

  日期：2010.10.1

  complex of T6 were characterized by X-ray crystallography. The structure of [Cu(T1)2(H2O)2](ClO4)2 reveals the interesting synergistic effect of hydrogen bonding, π−π stacking interactions, and metal coordination in forming a one-dimensional supramolecular construct in the solid state. The tetradentate coordination mode of T6 may be incorporated into designs of new molecule sensors and organometallic

  我们在之前的通讯中描述了流行的 Cu I催化的叠氮化物-炔烃环加成 (AAC) 过程的变体，其中 5 mol% 的 Cu(OAc) 2在不添加任何还原剂的情况下足以进行反应。发现 2-吡啶甲酰叠氮化物( 1 ) 和 2-叠氮甲基喹啉 ( 2 ) 是迄今为止最具反应性的叠氮化碳底物，在所发现的条件下，它们可在短短几分钟内转化为 1,2,3-三唑。我们假设1和2螯合 Cu II 的能力对观察到的高反应速率有显着贡献。目前的工作检查了在 Cu II 的吡啶基以外的叠氮基附近的辅助配体对 Cu(OAc) 2加速的 AAC 反应效率的影响。在报道的条件下，能够以螯合方式与烷基化叠氮氮的催化铜中心结合的碳叠氮化物确实被证明是优良的底物。在 X 射线单晶结构中证明了叠氮化碳11和 Cu II之间的螯合。在一组有限的例子中，由 Fokin 等人开发的配体三（苄基三唑基甲基）胺（TBTA）。用于辅助原始 Cu