1-(3-氯-苯基)-环丙烷甲腈 | 124276-32-0

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 1-(3-氯-苯基)-环丙烷甲腈
• 中文别名: 1-(3-氯苯基)环丙烷甲腈
• 英文名称: 1-(3-chloro-phenyl)cyclopropanecarbonitrile
• 英文别名: 1-(3-chlorophenyl)cyclopropane-1-carbonitrile；1-(3-Chlorophenyl)cyclopropanecarbonitrile
• CAS: 124276-32-0
• 化学式: C₁₀H₈ClN
• 分子量: 177.633
• InChiKey: DHNLVTGCFXWYFU-UHFFFAOYSA-N

物化性质

• 沸点：
  316.5±35.0 °C(Predicted)
• 密度：
  1.24±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  2.5
• 重原子数：
  12
• 可旋转键数：
  1
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.3
• 拓扑面积：
  23.8
• 氢给体数：
  0
• 氢受体数：
  1

安全信息

• 海关编码：
  2926909090
• 包装等级：
  III
• 危险类别：
  8
• 危险性防范说明：
  P280,P305+P351+P338+P310
• 危险品运输编号：
  1759
• 危险性描述：
  H318
• 储存条件：
  室温

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 1-(3-Chlorophenyl)cyclopropanecarbonitrile
Synonyms: 1-(3-Chlorophenyl)-1-cyanocyclopropane

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 1-(3-Chlorophenyl)cyclopropanecarbonitrile
CAS number: 124276-32-0

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C10H8ClN
Molecular weight: 177.6

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-(3-氯-苯基)-环丙烷甲腈 在 lithium hydroxide 作用下， 以 水 为溶剂， 生成 1-(3-氯苯基)环丙烷甲酸
  参考文献：
  名称：

  铑催化环丙基CH键的对映选择性硅烷化

  摘要：

  氢硅烷基醚是通过环丙基甲醇与二乙基硅烷的脱氢硅烷化原位生成的，在源自铑前体和双膦的铑催化剂存在下，以高收率和高对映体过量进行环丙基CH键的不对称分子内硅烷化（ S )-DTBM-SEGPHOS。所得的对映体富集的氧杂硅氧烷是 Tamao-Fleming 氧化形成环丙醇的合适底物，同时保留了 C−H 甲硅烷基化的ee值。初步的机制数据表明，C−H 裂解可能是转换限制和对映选择性决定步骤。

  DOI：

  10.1002/anie.201603153
• 作为产物：
  描述：

  间氯氰苄 、 1-溴-2-氯乙烷 在 苄基三乙基氯化铵 、 sodium hydroxide 作用下， 以 水 为溶剂， 以100%的产率得到1-(3-氯-苯基)-环丙烷甲腈
  参考文献：
  名称：

  铱催化环丙烷的简单醚导向对映选择性 C(sp3)-H 硼酸化

  摘要：

  首次通过CBL /iridium 催化实现了环丙烷的简单醚导向对映选择性 C( sp 3 )−H 硼酸化。报告的方法具有广泛的官能团耐受性（38 个示例）、出色的对映选择性（高达 99% ee）和高转换数（高达 335）。

  DOI：

  10.1002/anie.202300199

文献信息

• Methods and Compositions for Selectin Inhibition
  申请人：Kaila Neelu

  公开号：US20080255192A1

  公开（公告）日：2008-10-16

  The present teachings relate to novel compounds of formula I: wherein the constituent variables are as defined herein. Compounds of the present teachings can act as antagonists of the mammalian adhesion proteins known as selecting. Methods for treating or preventing selectin-mediated disorders are provided, which include administration of these compounds in a therapeutically effective amount.

  本教学涉及到式I的新化合物： 其中组成变量如本文所定义。本教学的化合物可以作为被称为选择素的哺乳动物粘附蛋白的拮抗剂。提供了治疗或预防选择素介导的疾病的方法，包括以治疗有效剂量给予这些化合物。
• [EN] OXADIAZOLE COMPOUNDS<br/>[FR] COMPOSÉS D'OXADIAZOLE
  申请人：REMYND NV

  公开号：WO2015140130A1

  公开（公告）日：2015-09-24

  The present invention relates to a compound of formula (I) or (II) or a stereoisomer, enantiomer, racemic, or tautomer thereof, (I) (II) wherein R1,R2,R3,L1,L2,L3,L4,L5 and n, have the same meaning as that defined in the claims and the description. The present invention also relates to compositions, in particular pharmaceuticals, comprising such compounds, and to uses of such compounds and compositions for the prevention and/or treatment of metabolic disorders and/or neurodegenerative diseases, and/or protein misfolding disorders.

  本发明涉及式(I)或(II)的化合物或其立体异构体、对映体、消旋体或互变异构体，其中R1、R2、R3、L1、L2、L3、L4、L5和n的含义与权利要求和说明中定义的含义相同。本发明还涉及包含这些化合物的组合物，特别是药物，以及利用这些化合物和组合物预防和/或治疗代谢紊乱和/或神经退行性疾病和/或蛋白质错折性疾病的用途。
• Heteroaryl-Pyrazole Derivatives as Cannabinoid CB1 Receptor Antagonists
  申请人：LEE Jinhwa

  公开号：US20080081812A1

  公开（公告）日：2008-04-03

  A heteroaryl-pyrazole compound of formula (I) or a pharmaceutically acceptable salt thereof is effective as a cannabinoid CB 1 receptor inverse agonist or antagonist, which is useful for preventing or treating obesity and obesity-related metabolic disorders. The present invention also provides a method for preparing the inventive heteroaryl-pyrasole compounds or a pharmaceutically acceptable salt thereof, a pharmaceutical composition containing same, and a method for preventing or treating obesity and obesity-related metabolic disorders.

  一种异芳基-吡唑化合物，其公式为(I)或其药用可接受盐，可作为大麻素CB1受体的反向激动剂或拮抗剂，用于预防或治疗肥胖及其相关代谢紊乱。本发明还提供了制备本发明的异芳基-吡唑化合物或其药用可接受盐的方法，包含该化合物的药物组合物，以及用于预防或治疗肥胖及其相关代谢紊乱的方法。
• Lewis Basic Sulfide Catalyzed Electrophilic Bromocyclization of Cyclopropylmethyl Amide
  作者：Ying-Chieh Wong、Zhihai Ke、Ying-Yeung Yeung

  DOI：10.1021/acs.orglett.5b02557

  日期：2015.10.16

  A Lewis basic sulfide catalyzed electrophilic bromocyclization of cyclopropylmethyl amide has been developed. The catalytic protocol is applicable to both 1,1- and 1,2-substituted cyclopropylmethyl amides, giving oxazolines and oxazines in good yields and excellent diastereoselectivity.

  已经开发了路易斯碱性硫化物催化的环丙基甲基酰胺的亲电溴环化反应。该催化规程适用于1,1-和1,2-取代的环丙基甲基酰胺，从而以良好的收率和出色的非对映选择性提供了恶唑啉和恶嗪。
• Chiral Bidentate Boryl Ligand Enabled Iridium-Catalyzed Enantioselective C(sp³)–H Borylation of Cyclopropanes
  作者：Yongjia Shi、Qian Gao、Senmiao Xu

  DOI：10.1021/jacs.9b04549

  日期：2019.7.10

  We herein report an Ir-catalyzed enantioselective C(sp3)-H borylation of cyclopropanecarboxamides using a chiral bidentate boryl ligand for the first time. A variety of substrates with α-quaternary carbon centers could be compatible in this reaction to provide β-borylated products with good to excellent enantioselectivities. We have also demonstrated that the borylated products can be used as versatile

  我们在此报告了首次使用手性双齿硼酸配体对环丙烷甲酰胺进行 Ir 催化的对映选择性 C(sp3)-H 硼酸化。具有 α-季碳中心的多种底物可以在该反应中相容，以提供具有良好至优异对映选择性的 β-硼酸化产物。我们还证明，硼酸化产物可用作多功能前体，参与 CB 键的立体有择转化，包括合成生物活性化合物 Levomilnacipran。