摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

1-溴-4-(2-氟乙氧基)苯 | 332-47-8

中文名称
1-溴-4-(2-氟乙氧基)苯
中文别名
——
英文名称
1-bromo-4-(2-fluoroethoxy)benzene
英文别名
——
1-溴-4-(2-氟乙氧基)苯化学式
CAS
332-47-8
化学式
C8H8BrFO
mdl
——
分子量
219.053
InChiKey
HCSATMHJZXLZDU-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    248.7±20.0 °C(Predicted)
  • 密度:
    1.445±0.06 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    2.9
  • 重原子数:
    11
  • 可旋转键数:
    3
  • 环数:
    1.0
  • sp3杂化的碳原子比例:
    0.25
  • 拓扑面积:
    9.2
  • 氢给体数:
    0
  • 氢受体数:
    2

安全信息

  • 海关编码:
    2909309090

SDS

SDS:190f7d45a317f77c44d1dcf0424dbb38
查看
Material Safety Data Sheet

Section 1. Identification of the substance
Product Name: 1-Bromo-4-(2-fluoroethoxy)benzene
Synonyms:

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

Section 3. Composition/information on ingredients.
Ingredient name: 1-Bromo-4-(2-fluoroethoxy)benzene
CAS number: 332-47-8

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C8H8BrFO
Molecular weight: 219.1

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, hydrogen fluoride, hydrogen bromide.

Section 11. Toxicological information
No data.

Section 12. Ecological information
No data.

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section 14. Transportation information
Non-harzardous for air and ground transportation.

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    1-溴-4-(2-氟乙氧基)苯 在 bis-triphenylphosphine-palladium(II) chloride 、 copper(l) iodidepotassium carbonate三乙胺 作用下, 以 氘代甲醇-d 为溶剂, 反应 15.0h, 生成 1-ethynyl-4-(2-fluoroethoxy)benzene
    参考文献:
    名称:
    Design of α7 nicotinic acetylcholine receptor ligands using the (het)Aryl-1,2,3-triazole core: Synthesis, in vitro evaluation and SAR studies
    摘要:
    We report here the synthesis of a large library of 1,2,3-triazole derivatives which were in vitro tested as alpha 7 nAchR ligands. The SAR study revealed that several crucial factors are involved in the affinity of these compounds for alpha 7 nAchR such as a (R) quinuclidine configuration and a mono C-3 quinuclidine substitution. The triazole ring was substituted by a phenyl ring bearing small OMe/CH2F groups or fluorine atom and by several heterocycles such as thiophenes, furanes, benzothiophenes or benzofuranes. Among the 30 derivatives tested, the two derivatives 10 and 39 with Ki in the nanomolar range were identified (2.3 and 3 nM respectively). They exhibited a strict selectivity toward the alpha 4 beta 2 nicotinic receptor (up to 1 mu M) but interacted with the 5HT(3) receptors with Ki around 3 nM. Synthesis, SAR studies and a full description of the derivatives are reported. (C) 2015 Elsevier Masson SAS. All rights reserved.
    DOI:
    10.1016/j.ejmech.2015.11.001
  • 作为产物:
    描述:
    4-溴苯酚对甲苯磺酸氟乙酯potassium carbonate 作用下, 以 乙腈 为溶剂, 反应 16.0h, 以100%的产率得到1-溴-4-(2-氟乙氧基)苯
    参考文献:
    名称:
    有效的基于3-benzazepine的GluN2B受体拮抗剂的4-苯基丁基侧链的修饰。
    摘要:
    NMDA受体过度活化驱动的兴奋性毒性代表了急性和慢性神经系统疾病和神经退行性疾病的主要机制。与NMDA受体的艾芬地尔结合位点相互作用的负变构调节剂能够中断这一正在进行的神经损伤过程。从有效的3-苯并ze庚因-1,7-二醇4a开始,通过修饰N-(4-苯基丁基)侧链设计了新型NMDA受体拮抗剂。关于开发新型氟化PET示踪剂,合成了区域异构的氟乙氧基衍生物11、12、14和15。通过Sonogashira反应和亲核取代制备在N-侧链末端具有各种杂芳基部分的类似物19和20。通过1,3-偶极环加成获得氟乙基三唑37。在几个新的配体中 (杂)芳基丁基侧链的柔韧性受到三键结合的限制。在已确定的竞争性分析中,使用[3H]芬苯甲腈作为放射性配体,测试了对苯丙草胺结合位点的亲和力。在末端苯环上引入氟乙氧基部分,用杂芳基环取代末端苯环,并将三键结合到丁基间隔基中,导致GluN2B亲和力大大降低。在末端苯环上带有对氟乙氧基部分的苯酚15(Ki
    DOI:
    10.1016/j.bmc.2019.06.035
点击查看最新优质反应信息

文献信息

  • Bis(het)aryl-1,2,3-triazole quinuclidines as α7 nicotinic acetylcholine receptor ligands: Synthesis, structure affinity relationships, agonism activity, [18F]-radiolabeling and PET study in rats
    作者:Aziz Ouach、Johnny Vercouillie、Emilie Bertrand、Nuno Rodrigues、Frederic Pin、Sophie Serriere、Liliana Boiaryna、Agnes Chartier、Nathalie Percina、Pakorn Tangpong、Zuhal Gulhan、Celine Mothes、Jean-Bernard Deloye、Denis Guilloteau、Guylene Page、Franck Suzenet、Frederic Buron、Sylvie Chalon、Sylvain Routier
    DOI:10.1016/j.ejmech.2019.06.049
    日期:2019.10
    and nine of them exhibited Ki values below nanomolar concentrations. The best scores were always obtained when the 5-phenyl-2-thiophenyl core was attached to the triazole. The selectivity of these compounds towards the nicotinic α4β2 and serotoninergic 5HT3 receptors was assessed and their brain penetration was quantified by the preparation and in vivo evaluation of two [18F] radiolabelled derivatives
    在本文中,我们描述了使用有效的三步序列(包括与市售的硼衍生物和自制的硼衍生物的Suzuki-Miyaura交叉偶联反应)设计和合成双(Het)芳基-1,2,3-三唑喹核苷α7R配体的方法。 。SAR的勘探需要制备罕见的硼衍生物。测试了40种最终药物结合靶标的能力,其中9种药物的Ki值低于纳摩尔浓度。当将5-苯基-2-硫代苯基核心连接到三唑上时,总会获得最高分。通过制备和体内评估两种化合物,评估了这些化合物对烟碱型α4β2和5羟色胺能5HT3受体的选择性,并定量了它们的脑渗透率[ 18F]放射性标记的衍生物。从我们的结果可以预期,这些化合物中的一些将适合进一步发展,并将对认知障碍产生影响。
  • [EN] BENZO[1,2,5]OXADIAZOLES AND BENZO [1,2,5]THIADIAZOLES USEFUL AS HISTOPATHOLOGICAL STAINING AGENTS, IMAGING AGENTS AND BIOMARKERS<br/>[FR] BENZO[1,2,5]OXADIAZOLES ET BENZO [1,2,5]THIADIAZOLES UTILISES COMME AGENTS DE COLORATION HISTOPATHOLOGIGUE, AGENTS D'IMAGERIE ET BIOMARQUEURS
    申请人:NOVARTIS AG
    公开号:WO2004087684A1
    公开(公告)日:2004-10-14
    The present invention relates to novel benzo[1,2,5]oxadiazoles and benzo[1,2,5]thiadiazoles of formula (I) wherein X is O or S, R1 is 5-(2-fluoro-ethylamino)-thiazol-2-yl, 5-(2-18F-ethylamino)- thiazol-2-yl or a group of formula (a) wherein Y is CH or N, R2 is NHCH3, NH11CH3, N(CH3)11CH3, N(CH3)2, N(11CH3)2, NH(CH2)nF, NH(CH2)n18F, N(CH3)­(CH2)nF, N(CH3)-(CH2)n 18F, O-(CH2)nF, O-(CH2)n 18F, CONH(CH2)nF or CONH(CH2)n18F (n being in each case 2 to 4) and R3 is hydroxy, (C1-4)alkoxy, hydrogen or nitro, in free base or acid addition salt form; their preparation, their use as markers in diagnosis and compositions containing them.
    本发明涉及新型苯并[1,2,5]噁二唑和苯并[1,2,5]噻二唑,其化学式为(I),其中X为O或S,R1为5-(2-氟乙基氨基)-噻唑-2-基、5-(2-18F-乙基氨基)-噻唑-2-基或具有化学式(a)的基团,其中Y为CH或N,R2为NHCH3、NH11CH3、N(CH3)11CH3、N(CH3)2、N(11CH3)2、NH(CH2)nF、NH(CH2)n18F、N(CH3)(CH2)nF、N(CH3)-(CH2)n 18F、O-(CH2)nF、O-(CH2)n 18F、CONH(CH2)nF或CONH(CH2)n18F(其中n分别为2至4),R3为羟基、(C1-4)烷氧基、氢或硝基,以游离碱或盐酸盐的形式存在;其制备方法,作为诊断标记物的用途以及含有它们的组合物。
  • Selective Csp3–F Bond Functionalization with Lithium Iodide
    作者:Christian Wolf、Kaluvu Balaraman、Samantha Kyriazakos、Rachel Palmer、F. Yushra Thanzeel
    DOI:10.1055/s-0041-1738383
    日期:2022.10
    91–99% yield. The reaction is selective for aliphatic monofluorides and can be coupled with in situ nucleophilic iodide replacements to install carbon–carbon, carbon–nitrogen, and carbon–sulfur bonds with high yields. Alkyl difluorides, trifluorides, even in activated benzylic positions, are inert under the same conditions and aryl fluoride bonds are also tolerated.
    提出了一种使用廉价的碘化锂对各种活化和未活化脂肪族基材进行 C-F 键功能化的高效方法。伯、仲、叔、苄基、炔丙基和α-官能化烷基氟化物在氯化或芳香族溶剂中在室温或加热下反应生成相应的碘化物,其分离收率为91-99%。该反应对脂肪族一氟化物具有选择性,并且可以与原位亲核碘化物取代偶联,以高产率安装碳-碳、碳-氮和碳-硫键。烷基二氟化物、三氟化物,即使在活化的苄基位置,在相同条件下也是惰性的,并且也可以容忍芳基氟化物键。
  • Benzo[1,2,5]oxadiazoles and benzol[1,2,5]thiadiazoles useful as histopathological staining agents, imaging agents and biomarkers
    申请人:Auberson Yves
    公开号:US20060093551A1
    公开(公告)日:2006-05-04
    The present invention relates to novel benzo[1,2,5]oxadiazoles and benzo[1,2,5]thiadiazoles of formula (I) wherein X is O or S, R 1 is 5-(2-fluoro-ethylamino)-thiazol-2-yl, 5-(2- 18 F-ethylamino)-thiazol-2-yl or a group of formula (a) wherein Y is CH or N, R 2 is NHCH 3 , NH 11 CH 3 , N(CH 3 ) 11 CH 3 , N(CH 3 ) 2 , N( 11 CH 3 ) 2 , NH(CH 2 ) n F, NH(CH 2 ) n 18 F, N(CH 3 )(CH 2 ) n F, N(CH 3 )—(CH 2 ) n 18 F, O—(CH 2 ) n F, O—(CH 2 ) n 18 F, CONH(CH 2 )nF or CONH(CH 2 ) n 18 F (n being in each case 2 to 4) and R 3 is hydroxy, (C1-4)alkoxy, hydrogen or nitro, in free base or acid addition salt form; their preparation, their use as markers in diagnosis and compositions containing them.
    本发明涉及一种新型苯并[1,2,5]噁二唑和苯并[1,2,5]噻二唑的化合物,其化学式为(I),其中X为O或S,R1为5-(2-氟乙基氨基)噻唑-2-基、5-(2-18F-乙基氨基)噻唑-2-基或式(a)中的基团,其中Y为CH或N,R2为NHCH3、NH11CH3、N(CH3)11CH3、N(CH3)2、N(11CH3)2、NH(CH2)nF、NH(CH2)n18F、N(CH3)(CH2)nF、N(CH3)-(CH2)n18F、O-(CH2)nF、O-(CH2)n18F、CONH(CH2)nF或CONH(CH2)n18F(其中n在每种情况下均为2至4),R3为羟基、(C1-4)烷氧基、氢或硝基,以自由碱或酸盐的形式存在;本发明还涉及它们的制备、它们在诊断中的标记用途以及含有它们的组合物。
  • Novel silacyclohexane compounds, preparation thereof, liquid crystal compositions comprising the same, and liquid crystal devices comprising the compositions
    申请人:SHIN-ETSU CHEMICAL CO., LTD.
    公开号:EP0727428A1
    公开(公告)日:1996-08-21
    The invention relates to a silacyclohexane compound of the following formula (I) or (II) which is useful as a liquid crystal wherein R is an organic residue, one of which may be the same or different, is a trans-1-sila-1,4-cyclohexylene or trans-4-sila-1,4-cyclohexylene group which is substituted on the silicon atom by H, F, Cl or CH3, and the other is a trans-1,4-cyclohexylene group, or a trans-1-sila-1,4-cyclohexylene or trans-4-sila-1,4-cyclohexylene group as defined above, n is 0 or 1, L1 is H or F, L2 is H, F or Cl, and Z is CN, F, Cl or an organic residue. Processes for producing the compounds (I) and (II) are described, along with liquid crystal compositions comprising the compounds and liquid crystal devices comprising the compositions.
    本发明涉及一种可用作液晶的下式(I)或(II)的硅环己烷化合物 其中 R 是有机残留物、 其中之一 其中一个可以相同或不同,是硅原子上被 H、F、Cl 或 CH3 取代的反式-1-硅杂-1,4-环己烯或反式-4-硅杂-1,4-环己烯基团,另一个是反式-1、4-环己烯基团,或如上定义的反式-1-西拉-1,4-环己烯或反式-4-西拉-1,4-环己烯基团,n 为 0 或 1,L1 为 H 或 F,L2 为 H、F 或 Cl,Z 为 CN、F、Cl 或有机残基。 本文介绍了化合物(I)和(II)的生产工艺,以及包含这些化合物的液晶组合物和包含这些组合物的液晶器件。
查看更多