2-甲磺酰胺基苯腈 | 50790-29-9

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 2-甲磺酰胺基苯腈
• 中文别名: 2-甲磺酰氨基苯腈
• 英文名称: N-(2-cyanophenyl)methanesulfonamide
• 英文别名: 2-(Methanesulfonylamino)benzonitrile
• CAS: 50790-29-9
• 化学式: C₈H₈N₂O₂S
• mdl: MFCD00590384
• 分子量: 196.23
• InChiKey: RKJYYYHFUOVDAD-UHFFFAOYSA-N

物化性质

• 熔点：
  166 °C(Solv: water (7732-18-5); methanol (67-56-1))
• 沸点：
  366.1±44.0 °C(Predicted)
• 密度：
  1.36±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.4
• 重原子数：
  13
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.125
• 拓扑面积：
  78.3
• 氢给体数：
  1
• 氢受体数：
  4

安全信息

• 海关编码：
  2935009090

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 2-(Methanesulfonylamino)benzonitrile
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 2-(Methanesulfonylamino)benzonitrile
CAS number: 50790-29-9

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C8H8N2O2S
Molecular weight: 196.2

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, sulfur oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  2-甲磺酰胺基苯腈 在 盐酸 、 caesium carbonate 作用下， 以 二氯甲烷 、 水 、 N,N-二甲基甲酰胺 为溶剂， 反应 3.5h， 生成 N-(2-cyanophenyl)-N-(1-chlorovinyl)methanesulfonamide
  参考文献：
  名称：

  两相体系中具有卤化氢水溶液的α-卤代酰胺，乙烯基硫醚和乙烯基醚的高度区域选择性和立体选择性合成

  摘要：

  实现了使用HX（X = F，Cl，Br，I）水溶液的无金属区域和立体选择性方法，用于制备（E）构型的α-卤代酰胺，乙烯基硫醚和乙烯基醚组相容性和区域和立体选择性，温和条件，高效率和快速转化。另外，可通过光催化或在Sonogashira偶联条件下容易地由（E）-构型的α-卤代酰胺产生异构体。

  DOI：

  10.1021/acs.orglett.8b01809
• 作为产物：
  描述：

  2-氨基苯甲腈 在 sodium hydride 、 三乙胺 作用下， 以 四氢呋喃 、 二氯甲烷 、 水 为溶剂， 反应 1.25h， 生成 2-甲磺酰胺基苯腈
  参考文献：
  名称：

  的CSIC [ C ^ arbanion介导的小号ulfonate（小号ulfonamido）我ntramolecular Ç yclization]反应：范围和限制

  摘要：

  CSIC（碳负离子介导的磺酸盐-磺酰胺-分子内环化）反应已扩展到新的含羰基底物，显示了该方法的范围和局限性。酮（例如，苯乙酮（1）），β-酮酯（例如乙酰乙酸乙酯（4）），γ-酮酯（例如2-氧代环己烷乙酸乙酯（5）和乙酰丙酸乙酯（6））的合适衍生物被证明是不愿意这样做的。协议。仅在CSIC反应的“磺酰胺”合成顺序中，环丙基甲基酮（2）给出了杂环（3）。环状氮杂酮（例如托巴酮（7））也失败了，但是4-哌啶酮（9、10）制得新颖的3,8-二取代的4-氨基-8-氮杂-1-氧杂-2-氧杂螺并[4.5]癸-3-烯2,2-二氧化物（12，15a -c）和8-取代的4-氨基-1,8-二氮杂-2-硫杂螺[4.5]癸-3-烯2,2-二氧化物（18a，18b，21a，21b）环系统；前一种化合物是在3位上取代的此类环系的第一个实例，而后者则是包含4-氨基-2,3-二氢异噻唑1,1-二氧化物部分的螺稠合系统的首个

  DOI：

  10.1016/s0040-4020(99)00379-8

文献信息

• [EN] PYRROLOPYRIMIDINES AS FAK AND ALK INHIBITERS FOR TREATMENT OF CANCERS AND OTHER DISEASES<br/>[FR] PYRROLOPYRIMIDINES À TITRE D'INHIBITEURS DE FAK ET D'ALK POUR LE TRAITEMENT DES CANCERS ET AUTRES MALADIES
  申请人：ABBOTT LAB

  公开号：WO2012045195A1

  公开（公告）日：2012-04-12

  Disclosed are compounds which inhibit the activity of focal adhesion kinase (FAK) and anaplastic lymphoma kinase (ALK), compositions containing the compounds, and methods of treating diseases during which FAK and ALK are expressed. The diseases are, for example, cancers.

  揭示了抑制焦点粘附激酶（FAK）和间变性淋巴瘤激酶（ALK）活性的化合物，含有这些化合物的组合物，以及治疗在其中FAK和ALK表达的疾病的方法。这些疾病例如包括癌症。
• β-Cyclodextrin-Catalyzed Monosulfonylation of Amines and Amino Acids in Water
  作者：R. Sridhar、B. Srinivas、V. Pavan Kumar、M. Narender、K. Rama Rao

  DOI：10.1002/adsc.200600652

  日期：2007.8.6

  A mild and efficient procedure has been developed for the first time under biomimetic conditions for the monosulfonylation of various amines and amino acids catalyzed by β-cyclodextrin in water at room temperature to afford the corresponding sulfonamides in high yields.

  首次在仿生条件下开发了一种温和而有效的方法，用于室温下水中β-环糊精催化的各种胺和氨基酸的单磺酰化反应，从而以高收率提供相应的磺酰胺。
• Mild hypervalent iodine mediated oxidative nitration of N-aryl sulfonamides
  作者：Ulrich Kloeckner、Boris J. Nachtsheim

  DOI：10.1039/c4cc04738a

  日期：——

  An oxidative and acid-free method for the nitration of N-aryl sulfonamides has been developed using a combination of sodium nitrite as cheap and easy to handle NO2-source and the hypervalent iodine reagent PIFA as stoichiometric oxidant. Under very mild reaction conditions, the desired mononitrated aryl sulfonamides were isolated in up to 87% yield. This is the first example of an iodane-mediated oxidative nitration.

  已开发出一种无氧化剂和酸的N-芳基磺酰胺硝化方法，该方法采用廉价的亚硝酸钠作为易处理的NO2来源，以及高价碘试剂PIFA作为定量氧化剂。在非常温和的反应条件下，所期望的单硝基芳基磺酰胺以高达87%的产率被分离出来。这是首次报道碘烷介导的氧化硝化反应。
• SULFONYL AMIDE DERIVATIVES FOR THE TREATMENT OF ABNORMAL CELL GROWTH
  申请人：Luzzio Michael Joseph

  公开号：US20090054395A1

  公开（公告）日：2009-02-26

  The present invention relates to a compound of the formula I wherein R 1 to R 6 , A, B, n and m are as defined herein. Such novel sulfonyl amide derivatives are useful in the treatment of abnormal cell growth, such as cancer, in mammals. This invention also relates to a method of using such compounds in the treatment of abnormal cell growth in mammals, especially humans, and to pharmaceutical compositions containing such compounds.

  本发明涉及一种具有以下式I的化合物 其中R 1 至R 6 ，A，B，n和m如本文所定义。这种新型磺酰胺衍生物在治疗哺乳动物（如癌症）中的异常细胞生长方面是有用的。本发明还涉及一种在治疗哺乳动物（尤其是人类）中的异常细胞生长中使用这种化合物的方法，以及含有这种化合物的药物组合物。
• Synthesis and Analgesic Activity of Some 1-Benzofurans, 1-Benzothiophenes and Indoles
  作者：Stanislav Rádl、Petr Hezký、Jitka Urbánková、Petr Váchal、Ivan Krejčí

  DOI：10.1135/cccc20000280

  日期：——

  3-Unsubstituted 1-benzofurans 1e and 1f, 3-methyl-1-benzofurans 1a-1d, and 3-amino-1-benzofurans 2a-2l, as well as 3-amino-1-benzothiophenes 3a, 3b and 3-aminoindoles 4a-4f, 11a, and 11b were prepared and tested as analgesics. The 3-amino-1-benzofurans 2 were prepared from the corresponding 2-hydroxybenzonitriles 5 and phenacyl bromides 6 via intermediates 7. Similar treatment of 2-sulfanylbenzonitrile (8) provided 3-amino-1-benzothiophenes 3. Appropriately substituted 2-aminobenzonitriles 9 then provided N-substituted 3-aminoindoles 4. 1-(Ethoxycarbonyl)indoles 4e and 4f were successfully deprotected giving indoles 11a and 11b, respectively.

  3-未取代的1-苯并呋喃1e和1f，3-甲基-1-苯并呋喃1a-1d，以及3-氨基-1-苯并呋喃2a-2l，以及3-氨基-1-苯并噻吩3a，3b和3-氨基吲哚4a-4f，11a和11b被制备并作为镇痛药进行测试。3-氨基-1-苯并呋喃2是从相应的2-羟基苯甲腈5和苯乙酮溴化物6经过中间体7制备的。对2-硫代基苯甲腈（8）的类似处理提供了3-氨基-1-苯并噻吩3。适当取代的2-氨基苯甲腈9然后提供了N-取代的3-氨基吲哚4。1-(乙氧羰基)吲哚4e和4f成功脱保护，分别给出吲哚11a和11b。