3-苯氧基苯腈 | 50789-45-2

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 3-苯氧基苯腈
• 英文名称: 3-phenoxybenzonitrile
• 英文别名: 3-cyano-diphenyl ether；meta-phenoxybenzonitrile
• CAS: 50789-45-2
• 化学式: C₁₃H₉NO
• mdl: MFCD05669318
• 分子量: 195.221
• InChiKey: IBUQEIIFTPFARK-UHFFFAOYSA-N

物化性质

• 沸点：
  149 °C

计算性质

• 辛醇/水分配系数(LogP)：
  3.6
• 重原子数：
  15
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.0
• 拓扑面积：
  33
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 危险品标志：
  Xi
• 海关编码：
  2926909090
• 储存条件：
  室温且干燥

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 3-Phenoxybenzonitrile
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 3-Phenoxybenzonitrile
CAS number: 50789-45-2

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C13H9NO
Molecular weight: 195.2

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  3-苯氧基苯腈 在 盐酸 、 氢氧化钾 、 乙醚 、 tin(ll) chloride 作用下， 生成 3-苯氧基苯甲酸
  参考文献：
  名称：

  Lock; Kempter, Monatshefte fur Chemie, 1936, vol. 67, p. 24,35

  摘要：

  DOI：
• 作为产物：
  描述：

  3-氯苯腈 在 氯化亚铜 sodium phenoxide 作用下， 生成 3-苯氧基苯腈
  参考文献：
  名称：

  Ullmann reaction for the synthesis of diaryl ethers

  摘要：

  Ullman反应是通过将芳基卤化物与金属酚盐耦合制备二芳基醚，该反应在至少一种具有以下结构的三级胺络合剂存在下进行：N--CHR.sub.1 --CHR.sub.2 --O--CHR.sub.3 --CHR.sub.4 --O--.sub.n R.sub.5 ].sub.3

  公开号：

  US04288386A1

文献信息

• Design and synthesis of low molecular weight compounds with complement inhibition activity
  作者：Hoshang E. Master、Shabana I. Khan、Krishna A. Poojari

  DOI：10.1016/j.bmc.2005.04.075

  日期：2005.8

  An attempt was made to synthesize a series of non-cytotoxic low molecular weight compounds of varying substitutions and functionalities having pharmacophore activity like carbonyl compounds, carboxylic acid and bioisosteres like tetrazole and phenyl acrylic acid. The in vitro assay of these analogues for the inhibition of complement activity revealed significant inhibitory activity for varying substituents

  尝试合成一系列具有药效基团活性的，具有不同取代基和功能的，具有不同取代基和官能度的非细胞毒性低分子量化合物，例如羰基化合物，羧酸和生物异构体，例如四唑和苯基丙烯酸。这些类似物在体外对补体活性的抑制作用的测定表明对不同的取代基，特别是对生物等排体，即四唑和苯基丙烯酸衍生物，具有显着的抑制活性。
• Chemoselective Schmidt Reaction Mediated by Triflic Acid: Selective Synthesis of Nitriles from Aldehydes
  作者：Balaji V. Rokade、Kandikere Ramaiah Prabhu

  DOI：10.1021/jo3008258

  日期：2012.6.15

  An excellent utility of Schmidt reaction of aldehydes to access corresponding nitriles in an instantaneous reaction is demonstrated. The reaction of aldehydes with NaN3 and TfOH furnishes the corresponding nitriles in near quantitative yields and tolerates a variety of electron-withdrawing and electron-donating substituents on the substrates. Formanilides, a common side product in Schmidt reaction

  已证明醛的Schmidt反应在瞬时反应中能很好地利用相应的腈。醛与NaN 3和TfOH的反应以接近定量的产率提供了相应的腈，并且可以承受底物上的各种吸电子和供电子取代基。在施密特反应中常见的副产物甲虫胺未在该反应中观察到。除了这些优点之外，该反应的显着特征是它显示出显着的化学选择性，因为在反应条件下对酸和酮的官能度具有很好的耐受性。该反应易于扩展，高收率并且几乎是瞬时的。
• A novel oxidative transformation of alcohols to nitriles: an efficient utility of azides as a nitrogen source
  作者：Balaji V. Rokade、Sanjeev K. Malekar、Kandikere Ramaiah Prabhu

  DOI：10.1039/c2cc31256e

  日期：——

  An efficient methodology to oxidize benzylic and cinnamyl alcohols to their corresponding nitriles in excellent yields has been developed. This methodology employs DDQ as an oxidant and TMSN3 as a source of nitrogen in the presence of a catalytic amount of Cu(ClO4)2·6H2O.

  已开发出一种高效的方法论，能够将苄醇和肉桂醇氧化为其相应的腈类化合物，并获得极佳的产率。该方法论采用DDQ作为氧化剂，TMSN3作为氮源，在微量Cu(ClO4)2·6H2O催化剂存在下进行反应。
• Cascade Process for Direct Transformation of Aldehydes (RCHO) to Nitriles (RCN) Using Inorganic Reagents NH₂OH/Na₂CO₃/SO₂F₂ in DMSO
  作者：Wan-Yin Fang、Hua-Li Qin

  DOI：10.1021/acs.joc.8b03164

  日期：2019.5.3

  and practical process for direct conversion of aldehydes to nitriles was developed feathering a wide substrate scope and great functional group tolerability (52 examples, over 90% yield in most cases) using inorganic reagents (NH2OH/Na2CO3/SO2F2) in DMSO. This method allows for transformations of readily available, inexpensive, and abundant aldehydes to highly valuable nitriles in a pot, atom, and

  使用无机试剂（NH 2 OH / Na 2 CO ）开发了一种简单，温和且实用的方法，将醛直接转化为腈，可在较宽的底物范围内实现出色的官能团耐受性（52个实例，大多数情况下产率超过90％）3 / SO 2 F 2）在DMSO中。该方法允许以易用，原子和步经济的方式将易于获得，廉价且丰富的醛转化为高度有价值的腈，而无需过渡金属。该协议将作为将氰基部分安装到复杂分子的强大工具。
• Copper-Catalyzed Synthesis of Nitriles by Aerobic Oxidative Reaction of Alcohols and Ammonium Formate
  作者：Dilip Kumar T. Yadav、Bhalchandra M. Bhanage

  DOI：10.1002/ejoc.201300361

  日期：2013.8

  An efficient methodology has been developed for the synthesis of nitriles through an aerobic oxidative reaction of alcohols and ammonium formate with copper as a homogeneous catalyst under a normal air atmosphere and solvent-free conditions. This protocol uses the air as a green oxidant and ammonium formate as the nitrogen source. A wide range of substrates were well tolerated in the reaction that

  已开发出一种通过醇和甲酸铵与作为均相催化剂的铜在正常空气气氛和无溶剂条件下的有氧氧化反应合成腈的有效方法。该协议使用空气作为绿色氧化剂和甲酸铵作为氮源。在产生水作为副产物的反应中，广泛的底物耐受性良好。