4-(4-氟苯基磺酰基)吗啉 | 383-23-3

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 4-(4-氟苯基磺酰基)吗啉
• 中文别名: 4-((4-氟苯基)磺酰)吗啉
• 英文名称: 4-((4-fluorophenyl)sulfonyl)morpholine
• 英文别名: 4-(4-fluorophenyl)sulfonylmorpholine
• CAS: 383-23-3
• 化学式: C₁₀H₁₂FNO₃S
• mdl: MFCD00194713
• 分子量: 245.275
• InChiKey: LDBBCISSYGDVIH-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  0.8
• 重原子数：
  16
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.4
• 拓扑面积：
  55
• 氢给体数：
  0
• 氢受体数：
  5

安全信息

• 海关编码：
  2934999090

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 4-(4-Fluorophenylsulfonyl)morpholine
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 4-(4-Fluorophenylsulfonyl)morpholine
CAS number: 383-23-3

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C10H12FNO3S
Molecular weight: 245.3

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen fluoride, sulfur oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  4-(4-氟苯基磺酰基)吗啉 在 肼 作用下， 以 N-甲基吡咯烷酮 为溶剂， 反应 1.0h， 生成 4-[(4-肼基苯基)磺酰基]吗啉
  参考文献：
  名称：

  Use of substituted 3-phenyl-5-alkoxy-3H-(1,3,4)-oxadizol-2-ones for inhibiting pancreatic lipase

  摘要：

  本发明涉及一种用于抑制胰腺脂肪酶，或预防或治疗1型和2型糖尿病或肥胖症的方法，适用于需要的患者，包括向患者投给药理有效量的取代的3-苯基-5-烷氧基-3H-(1,3,4)-恶二唑-2-酮，其化学式为1：1，其中R1、R2、R3、R4和R5如本文所述定义，或其前药、溶剂化物、药理上可接受的盐或酸性加成盐。

  公开号：

  US20030236288A1
• 作为产物：
  描述：

  4-氟苯基溴化镁 在 sodium hypochlorite 、 二氧化硫 、 溶剂黄146 作用下， 以 四氢呋喃 、 水 为溶剂， 反应 3.0h， 生成 4-(4-氟苯基磺酰基)吗啉
  参考文献：
  名称：

  Efficient and Practical Synthesis of Sulfonamides Utilizing SO₂ Gas Generated On Demand

  摘要：

  A simple and practical protocol was developed for the synthesis of sulfonamides by reacting organometallic reagents with SO2 gas generated on demand. SO2 was generated from readily available reagents safely in a highly contained and controlled fashion. The protocol allows the synthesis of sulfonamides without using either atom-inefficient SO2 surrogates or a SO2 cylinder that requires stringent storage regulations in the laboratory. The protocol was successfully applied to the synthesis of sildenafil.

  DOI：

  10.1021/acs.oprd.9b00552

文献信息

• Anilino-pyrimidine phenyl and benzothiophene analogs
  申请人：Hu Yongbo

  公开号：US20070244140A1

  公开（公告）日：2007-10-18

  The present invention relates to compounds of formula III: wherein R 2 , R 3 , R 5 and R 6 are as defined herein.

  本发明涉及以下式III的化合物： 其中R2、R3、R5和R6如本文所定义。
• NAPHTHYLACETIC ACIDS
  申请人：Chen Li

  公开号：US20100125058A1

  公开（公告）日：2010-05-20

  The invention is concerned with the compounds of formula I: and pharmaceutically acceptable salts and esters thereof, wherein W, X, Y, and R 1 -R 7 are defined in the detailed description and claims. In addition, the present invention relates to methods of manufacturing and using the compounds of formula I as well as pharmaceutical compositions containing such compounds. The compounds of formula I are antagonists or partial agonists at the CRTH2 receptor and may be useful in treating diseases and disorders associated with that receptor such as asthma.

  这项发明涉及公式I的化合物： 以及其药学上可接受的盐和酯，其中W、X、Y和R1-R7在详细说明和权利要求中有定义。此外，本发明涉及制造和使用公式I化合物的方法，以及含有这些化合物的药物组合物。公式I的化合物是CRTH2受体的拮抗剂或部分激动剂，可能在治疗与该受体相关的疾病和紊乱方面有用，如哮喘。
• Metal-free I₂O₅-mediated direct construction of sulfonamides from thiols and amines
  作者：Minghui Zhu、Wei Wei、Daoshan Yang、Huanhuan Cui、Leilei Wang、Guoqing Meng、Hua Wang

  DOI：10.1039/c7ob00668c

  日期：——

  A simple and convenient method has been developed for the construction of sulfonamides via I2O5-mediated sulfonylation of amines with arylthiols. The present protocol provides an attractive approach to sulfonamides in moderate to good yields from readily accessible and easy to handle starting materials under mild and metal-free conditions.

  已经开发了一种简单而方便的方法，用于通过I2O5介导的胺与芳硫醇的磺酰化反应来构建磺酰胺。本方案提供了一种诱人的方法，可在温和且无金属的条件下，以易于获得和易于处理的起始原料，以中等至良好的收率获得磺酰胺类药物。
• 一种磺酰胺类化合物的制备方法
  申请人：曲阜师范大学

  公开号：CN107033106B

  公开（公告）日：2019-09-10

  本发明公开了一种磺酰胺类化合物的制备方法。本发明以简单易得的硫酚和胺为原料在安全稳定的五氧化二碘介导下进行直接氧化偶联反应制备磺酰胺。本方法的优点是：反应条件温和（60oC）、原料简单易得且价格便宜、反应环境友好、底物适应范围广、不需要使用任何金属催化剂、低或高温及无水无氧等苛刻的反应条件，避免常见合成方法涉及的金属污染，同时，还具有操作简便安全、工艺条件稳定、产品易纯化等优点，适合规模化生产。
• A general palladium-catalyzed cross-coupling of aryl fluorides and organotitanium (IV) reagents
  作者：Xiao-Yun He

  DOI：10.1007/s00706-021-02796-6

  日期：2021.7

  Pd(OAc)2/1-[2-(di-tert-butylphosphanyl)phenyl]-4-methoxy-piperidine was demonstrated to effectively catalyze cross-coupling of aryl fluoride and aryl(alkyl) titanium reagent. Both electron-deficient and electron-rich aryl fluoride can react effectively with nucleophile and provide extensive functional groups tolerance. 2-Arylated product was realized by selective activation of the C–F bond. Graphic

  Pd(OAc) 2 /1-[2-(二-叔丁基膦酰基)苯基]-4-甲氧基-哌啶被证明可以有效地催化芳基氟和芳基(烷基)钛试剂的交叉偶联。缺电子和富电子芳基氟化物均可与亲核试剂有效反应并提供广泛的官能团耐受性。2-芳基化产物是通过选择性激活 C-F 键实现的。 图形摘要