摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

17α-hydroxy-17β-methylandrosta-1,4-dien-3-one | 33526-40-8

中文名称
——
中文别名
——
英文名称
17α-hydroxy-17β-methylandrosta-1,4-dien-3-one
英文别名
17α-17-hydroxy-17-methylandrosta-1,4-dien-3-one;17β-methyl-androst-1,4-dien-17α-ol;17-epi-Methandrostenolone;epi-methandrostenolone;17-epimethandienone;17-epimetandienone;Epimethandienone;(8R,9S,10R,13S,14S,17R)-17-hydroxy-10,13,17-trimethyl-7,8,9,11,12,14,15,16-octahydro-6H-cyclopenta[a]phenanthren-3-one
17α-hydroxy-17β-methylandrosta-1,4-dien-3-one化学式
CAS
33526-40-8
化学式
C20H28O2
mdl
——
分子量
300.441
InChiKey
XWALNWXLMVGSFR-MPRNQXESSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    3.6
  • 重原子数:
    22
  • 可旋转键数:
    0
  • 环数:
    4.0
  • sp3杂化的碳原子比例:
    0.75
  • 拓扑面积:
    37.3
  • 氢给体数:
    1
  • 氢受体数:
    2

SDS

SDS:eaee94c68e37e26c42d25847fbc2237e
查看

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    17α-hydroxy-17β-methylandrosta-1,4-dien-3-one碘代三甲硅烷三甲基硅咪唑 作用下, 反应 0.42h, 生成 17-epimetandienone,bis-TMS
    参考文献:
    名称:
    人类中17种α-甲基同化类固醇的17-表异构化:17种α-羟基-17β-甲基类固醇的代谢和合成。
    摘要:
    17个β-二醇(XIX)(也是VI,VII和XI的代谢物),17个α-甲基-5α-雄甾烷3β,17个β-二醇(XX),17个α-甲基-5β-雄烷醇-3 alpha,17 beta-diol(XXI)(也是V,VII和VIII的代谢物),17 alpha-methyl-5 beta-androstane-3 beta,17 beta-diol(XXII)和17 beta-hydroxy -7α,17α-二甲基-5β-雄烷-3-酮(XXIII)是通过17β-硫酸盐合成的,该硫酸盐在水中自发水解成几种脱水产物,再合成为17α-羟基-17β-甲基差向异构体。通过使17β-羟基-17α-甲基甾族化合物与三氧化硫吡啶配合物反应来制备17β-硫酸盐。在相应的17个α-甲基差向异构体之前,从毛细管SE-54或OV-1色谱柱的70-170个亚甲基单元中,将17种β-甲基差向异构体作为三甲基甲硅烷基衍生物从气
    DOI:
    10.1016/0039-128x(92)90023-3
  • 作为产物:
    描述:
    美雄酮三氧化硫吡啶 作用下, 以 N,N-二甲基甲酰胺 为溶剂, 反应 36.0h, 生成 17α-hydroxy-17β-methylandrosta-1,4-dien-3-one
    参考文献:
    名称:
    人类中17种α-甲基同化类固醇的17-表异构化:17种α-羟基-17β-甲基类固醇的代谢和合成。
    摘要:
    17个β-二醇(XIX)(也是VI,VII和XI的代谢物),17个α-甲基-5α-雄甾烷3β,17个β-二醇(XX),17个α-甲基-5β-雄烷醇-3 alpha,17 beta-diol(XXI)(也是V,VII和VIII的代谢物),17 alpha-methyl-5 beta-androstane-3 beta,17 beta-diol(XXII)和17 beta-hydroxy -7α,17α-二甲基-5β-雄烷-3-酮(XXIII)是通过17β-硫酸盐合成的,该硫酸盐在水中自发水解成几种脱水产物,再合成为17α-羟基-17β-甲基差向异构体。通过使17β-羟基-17α-甲基甾族化合物与三氧化硫吡啶配合物反应来制备17β-硫酸盐。在相应的17个α-甲基差向异构体之前,从毛细管SE-54或OV-1色谱柱的70-170个亚甲基单元中,将17种β-甲基差向异构体作为三甲基甲硅烷基衍生物从气
    DOI:
    10.1016/0039-128x(92)90023-3
点击查看最新优质反应信息

文献信息

  • Mass spectrometric behavior of anabolic androgenic steroids using gas chromatography coupled to atmospheric pressure chemical ionization source. Part I: Ionization
    作者:M. Raro、T. Portolés、J. V. Sancho、E. Pitarch、F. Hernández、J. Marcos、R. Ventura、C. Gómez、J. Segura、O. J. Pozo
    DOI:10.1002/jms.3367
    日期:2014.6
    The detection of anabolic androgenic steroids (AAS) is one of the most important topics in doping control analysis. Gas chromatography coupled to (tandem) mass spectrometry (GC–MS(/MS)) with electron ionization and liquid chromatography coupled to tandem mass spectrometry have been traditionally applied for this purpose. However, both approaches still have important limitations, and, therefore, detection
    合成代谢雄激素类固醇(AAS)的检测是兴奋剂控制分析中最重要的主题之一。气相色谱联用电子电离(串联)质谱分析法(GC-MS(/ MS))和液相色谱联用的质谱联用已被传统地用于此目的。但是,这两种方法仍然具有重要的局限性,因此,目前通过这些策略的组合可以检测所有AAS。替代电离技术可以最大程度地减少这些缺点,并有助于实施一种用于检测AAS的单一方法。在当前工作中,已经测试了一种商业化的气相色谱与四极杆飞行时间分析仪结合使用的新型常压化学电离(APCI)源,以评估60型AAS的电离。已对未衍生化和三甲基甲硅烷基(TMS)衍生的化合物进行了研究。使用GC–APCI–MS可以将所有测定的AAS离子化,无论其结构如何。源中水作为改性剂的存在促进了质子化分子的形成([M + H]+),成为大多数研究化合物的光谱基峰。在这些条件下,非衍生化AAS的[M + H] +,[M + H-H 2 O] +和[M
  • Gas chromatography/chemical ionization triple quadrupole mass spectrometry analysis of anabolic steroids: ionization and collision-induced dissociation behavior
    作者:Michael Polet、Wim Van Gansbeke、Peter Van Eenoo、Koen Deventer
    DOI:10.1002/rcm.7472
    日期:2016.2.28
    detection of new anabolic steroid metabolites and new designer steroids is a challenging task in doping analysis. Switching from electron ionization gas chromatography triple quadrupole mass spectrometry (GC/EI‐MS/MS) to chemical ionization (CI) has proven to be an efficient way to increase the sensitivity of GC/MS/MS analyses and facilitate the detection of anabolic steroids. CI also extends the possibilities
    新的合成代谢类固醇代谢物和新设计的类固醇的检测在掺杂分析中是一项艰巨的任务。从电子电离气相色谱三重四极杆质谱(GC / EI-MS / MS)切换到化学电离(CI)是提高GC / MS / MS分析灵敏度并促进合成代谢类固醇检测的有效方法。CI还扩展了GC / MS / MS分析的可能性,因为分子离子由于较软的电离而保留为其质子化形式。在EI中,由于分子离子的丰度低或不存在以及广泛的(很大程度上是不可预测的)碎片,很难找到以前未知但预期的代谢物。这项工作的主要目的是研究大量合成代谢雄激素类固醇(AAS)作为其三甲基甲硅烷基衍生物的CI和碰撞诱导解离(CID)行为,以确定结构与CID片段化之间的相关性。需要澄清这些相关性,以阐明未知类固醇和新代谢产物的结构。
  • Real-time reaction monitoring by continuous-introduction ion-spray tandem mass spectrometry
    作者:Edgar D. Lee、Wolfgang Mueck、Jack D. Henion、Thomas R. Covey
    DOI:10.1021/ja00195a012
    日期:1989.6
    for real-time measurement of reactions. The reaction medium, reactants, and products were transferred to the ion source of the mass spectrometer from the reaction vessel in less than 1 s. A variety of model reactions have been investigated to demonstrate the feasibility acd potential for continuous-introduction ion-spray mass spectrometry for real-time reaction monitoring. The half-life for the solvolysis
    温度控制的反应容器与大气压电离、三重四极杆质谱仪上的离子喷雾 LC/MS 接口紧密耦合,用于研究在溶液中发生的反应的机械和动力学方面。自由进入反应容器和温度控制以及最小的样品消耗使连续引入离子喷雾质谱法成为实时测量反应的有用方法。反应介质、反应物和产物在不到 1 s 的时间内从反应容器转移到质谱仪的离子源。已经研究了各种模型反应,以证明连续引入离子喷雾质谱法用于实时反应监测的可行性和潜力。测定了硫酸甲氢烯醇酮在水性介质中的溶解半衰期和乳糖酶对 0-硝基苯基 PD-吡喃半乳糖苷的酶促水解的 Michaelis-Menten 常数。在线获得了α-胰凝乳蛋白酶和亮氨酸氨肽酶对强啡肽 1-8 的酶水解以及使用 fi-巯基乙醇对催产素中二硫键的还原,以强调该技术在肽测序和结构解析方面的能力。
  • TEMPERATURE DETECTION MATERIAL, TEMPERATURE DETECTION INK USING SAME, TEMPERATURE INDICATOR, METHOD FOR MANUFACTURING TEMPERATURE DETECTION MATERIAL, AND PRODUCT MANAGEMENT SYSTEM
    申请人:HITACHI INDUSTRIAL EQUIPMENT SYSTEMS CO., LTD.
    公开号:EP3557208A1
    公开(公告)日:2019-10-23
    An object of the present invention is to provide a temperature detection material that can be manufactured through a simple step and is excellent in handleability. In order to solve the above problem, the temperature detection material according to the present invention includes a temperature-indicating material including a leuco dye, a color developer, and a color eraser and a matrix material; and is characterized in that the matrix material is in a solid state, a melting point of the matrix material is higher than a melting point of the temperature-indicating material, and a phase separation structure in which the temperature-indicating material disperses in the matrix material is formed.
    本发明的目的是提供一种温度检测材料,该材料可通过简单的步骤制造,且操作性极佳。为了解决上述问题,根据本发明的温度检测材料包括一种温度指示材料,其中包括一种白兰地染料、一种显色剂和一种擦色剂以及一种基体材料;其特征在于,基体材料处于固态,基体材料的熔点高于温度指示材料的熔点,并且形成了温度指示材料分散在基体材料中的相分离结构。
  • TEMPERATURE SENSING MATERIAL, AND TEMPERATURE DEVIATION TIME ESTIMATING SYSTEM EMPLOYING SAME
    申请人:HITACHI INDUSTRIAL EQUIPMENT SYSTEMS CO., LTD.
    公开号:EP3730911A1
    公开(公告)日:2020-10-28
    An object of the present invention is to provide a temperature sensing material that changes a color density continuously with the lapse of time at a temperature not lower or higher than a predetermined temperature and a temperature deviation time estimating system using it. In order to achieve the above object, the temperature sensing material according to the present invention is a temperature sensing material having a structure of dispersing a temperature indicating material that changes color by crystallization in a dispersion medium and is characterized in that an average particle size of the temperature indicating material is not larger than a resolution when observed and a volume fraction of the temperature indicating material to the temperature sensing material is not less than 5%.
    本发明的目的是提供一种温度传感材料,它能在不低于或高于预定温度的条件下随着时间的推移连续改变颜色密度,并提供一种使用它的温度偏差时间估计系统。为了实现上述目的,根据本发明的温度传感材料是一种温度传感材料,其结构是在分散介质中分散通过结晶变色的温度指示材料,其特征在于温度指示材料的平均粒度在观察时不大于分辨率,并且温度指示材料占温度传感材料的体积分数不小于 5%。
查看更多