N-ethyl-N-[[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-(2-trimethylsilylethynyl)phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]diazenyl]ethanamine | 174753-50-5

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 英文名称: N-ethyl-N-[[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-(2-trimethylsilylethynyl)phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]diazenyl]ethanamine
• CAS: 174753-50-5
• 化学式: C₁₄₃H₁₉₅N₃Si
• 分子量: 1984.23
• InChiKey: APIJBAIHHOMXMV-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  39.25
• 重原子数：
  147.0
• 可旋转键数：
  60.0
• 环数：
  8.0
• sp3杂化的碳原子比例：
  0.55
• 拓扑面积：
  27.96
• 氢给体数：
  0.0
• 氢受体数：
  2.0

反应信息

• 作为反应物：
  描述：

  N-ethyl-N-[[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-(2-trimethylsilylethynyl)phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]diazenyl]ethanamine 在 碘甲烷 作用下， 以100%的产率得到2-[2-(3-ethylheptyl)-4-[2-[2-(3-ethylheptyl)-4-[2-[2-(3-ethylheptyl)-4-[2-[2-(3-ethylheptyl)-4-[2-[2-(3-ethylheptyl)-4-[2-[2-(3-ethylheptyl)-4-[2-[2-(3-ethylheptyl)-4-[2-[2-(3-ethylheptyl)-4-iodophenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl-trimethylsilane
  参考文献：
  名称：

  Rapid Solution and Solid Phase Syntheses of Oligo(1,4-phenylene ethynylene)s with Thioester Termini:  Molecular Scale Wires with Alligator Clips. Derivation of Iterative Reaction Efficiencies on a Polymer Support

  摘要：

  The syntheses of soluble oligo(2-alkyl-1,4-phenylene ethynylene)s via an iterative divergent/ convergent approach starting from 1-(diethyltriazyl)-3-alkyl-4-[(trimethyl are described. When the solublizing alkyl group is an ethyl substituent, the monomer, dimer, tetramer, and octamer can be synthesized. The octamer, however, is only minimally soluble. When the alkyl substituent is 3-ethylheptyl or dodecyl, the compounds are easily dissolved even at the 16-mer stage. The 16-mer is 128 Angstrom long in its near-linear extended conformation. At each stage in the iteration, the length of the framework doubles. Only three sets of reaction conditions are needed for the entire iterative synthetic sequence: an iodination, a protodesilylation, and a Pd/Cu-catalyzed cross coupling. Synthesis of the dodecyl-containing 16-mer was also achieved on Merrifield's resin using the iterative divergent/convergent approach. The oligomers were characterized spectroscopically and by mass spectrometry. The optical properties are presented which show that at the octamer stage, the optical absorbance maximum is nearly saturated. The size exclusion chromatography values for the number average weights, relative to polystyrene, illustrate the tremendous differences in the hydrodynamic volume of these rigid rod oligomers verses the random coils of polystyrene. These differences become quite apparent at the octamer stage. Equations were derived for assessing the efficiency of the polymer-supported reactions based on resin weight; differences, molar concentration differences, and elemental analysis data. Each of these methods' limitations are discussed. Attachment of thiol end groups, protected as thioacetyl moieties, was achieved. These serve as binding sites for adhesion to gold surfaces. In some cases, one end of the oligomeric chains is capped with a thiol group so that the surface attachments to gold could be studied. In other cases, thiol groups are affixed to both ends of the molecular chains so that future conduction studies could be done between proximal metallic probes. The rigid rod conjugated oligomers may act as molecular wires in molecular scale electronic devices, and they also serve as useful models for understanding analogous bulk polymers.

  DOI：

  10.1021/jo962336q
• 作为产物：
  描述：

  N-ethyl-N-[[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-ethynylphenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]diazenyl]ethanamine 、 [2-(3-Ethyl-heptyl)-4-(2-(3-ethyl-heptyl)-4-{2-(3-ethyl-heptyl)-4-[2-(3-ethyl-heptyl)-4-iodo-phenylethynyl]-phenylethynyl}-phenylethynyl)-phenylethynyl]-trimethyl-silane 在 copper(l) iodide 、 二异丙胺 、 三苯基膦 、 bis(dibenzylideneacetone)-palladium⁽⁰⁾ 作用下， 以 四氢呋喃 为溶剂， 反应 12.0h， 以70%的产率得到N-ethyl-N-[[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-[2-[3-(3-ethylheptyl)-4-(2-trimethylsilylethynyl)phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]ethynyl]phenyl]diazenyl]ethanamine
  参考文献：
  名称：

  Rapid Solution and Solid Phase Syntheses of Oligo(1,4-phenylene ethynylene)s with Thioester Termini:  Molecular Scale Wires with Alligator Clips. Derivation of Iterative Reaction Efficiencies on a Polymer Support

  摘要：

  The syntheses of soluble oligo(2-alkyl-1,4-phenylene ethynylene)s via an iterative divergent/ convergent approach starting from 1-(diethyltriazyl)-3-alkyl-4-[(trimethyl are described. When the solublizing alkyl group is an ethyl substituent, the monomer, dimer, tetramer, and octamer can be synthesized. The octamer, however, is only minimally soluble. When the alkyl substituent is 3-ethylheptyl or dodecyl, the compounds are easily dissolved even at the 16-mer stage. The 16-mer is 128 Angstrom long in its near-linear extended conformation. At each stage in the iteration, the length of the framework doubles. Only three sets of reaction conditions are needed for the entire iterative synthetic sequence: an iodination, a protodesilylation, and a Pd/Cu-catalyzed cross coupling. Synthesis of the dodecyl-containing 16-mer was also achieved on Merrifield's resin using the iterative divergent/convergent approach. The oligomers were characterized spectroscopically and by mass spectrometry. The optical properties are presented which show that at the octamer stage, the optical absorbance maximum is nearly saturated. The size exclusion chromatography values for the number average weights, relative to polystyrene, illustrate the tremendous differences in the hydrodynamic volume of these rigid rod oligomers verses the random coils of polystyrene. These differences become quite apparent at the octamer stage. Equations were derived for assessing the efficiency of the polymer-supported reactions based on resin weight; differences, molar concentration differences, and elemental analysis data. Each of these methods' limitations are discussed. Attachment of thiol end groups, protected as thioacetyl moieties, was achieved. These serve as binding sites for adhesion to gold surfaces. In some cases, one end of the oligomeric chains is capped with a thiol group so that the surface attachments to gold could be studied. In other cases, thiol groups are affixed to both ends of the molecular chains so that future conduction studies could be done between proximal metallic probes. The rigid rod conjugated oligomers may act as molecular wires in molecular scale electronic devices, and they also serve as useful models for understanding analogous bulk polymers.

  DOI：

  10.1021/jo962336q

文献信息

• Schumm, Jeffry; Pearson, Darren L.; Tour, James M., Angewandte Chemie, 1994, vol. 106, # 13, p. 1445 - 1448
  作者：Schumm, Jeffry、Pearson, Darren L.、Tour, James M.

  DOI：——

  日期：——