2-(4-溴苯基)-1-吗啉代乙酮 | 349428-85-9

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 2-(4-溴苯基)-1-吗啉代乙酮
• 中文别名: 2-(4-溴苯基)-1-吗啉酮
• 英文名称: 2-(4-bromophenyl)-1-morpholinoethanone
• 英文别名: 2-(4-bromophenyl)-1-morpholin-4-ylethanone
• CAS: 349428-85-9
• 化学式: C₁₂H₁₄BrNO₂
• mdl: MFCD01175592
• 分子量: 284.153
• InChiKey: SBYPWFXETHVEOJ-UHFFFAOYSA-N

物化性质

• 溶解度：
  38.8 [ug/mL]

计算性质

• 辛醇/水分配系数(LogP)：
  1.6
• 重原子数：
  16
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.416
• 拓扑面积：
  29.5
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 海关编码：
  2934999090

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 2-(4-Bromophenyl)-1-morpholinoethanone
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 2-(4-Bromophenyl)-1-morpholinoethanone
CAS number: 349428-85-9

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C12H14BrNO2
Molecular weight: 284.1

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen bromide.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  2-(4-溴苯基)-1-吗啉代乙酮 在 bis(1,5-cyclooctadiene)diiridium(I) dichloride 、 苯硅烷 作用下， 反应 2.0h， 以80 mg的产率得到4-(4-溴苯乙基)吗啉
  参考文献：
  名称：

  使用羧酸催化胺的还原性N-烷基化

  摘要：

  我们报告了伯胺或仲胺与羧酸的催化还原烷基化反应。两阶段过程涉及硅烷介导的直接酰胺化，然后进行催化还原。

  DOI：

  10.1039/c5cc08881j
• 作为产物：
  描述：

  对溴苯乙酸 在 氯化亚砜 作用下， 以 二氯甲烷 为溶剂， 反应 3.0h， 生成 2-(4-溴苯基)-1-吗啉代乙酮
  参考文献：
  名称：

  SUBSTITUTED BENZAMIDES AND THEIR USES

  摘要：

  本文提供了取代苯甲酰胺、其组合物的制备方法和使用方法。

  公开号：

  US20150329503A1

文献信息

• Nickel-Catalyzed Stereoselective Arylboration of Unactivated Alkenes
  作者：Kaitlyn M. Logan、Stephen R. Sardini、Sean D. White、M. Kevin Brown

  DOI：10.1021/jacs.7b12160

  日期：2018.1.10

  A Ni-catalyzed method for arylboration is disclosed. The method allows for highly stereoselective arylboration of unactivated alkenes. The reactions utilize a simple Ni-catalyst and work with a broad range of alkenes and aryl bromides. The products represent useful intermediates for chemical synthesis due to the versatility of the C-B bond. Preliminary mechanistic details of the method are also disclosed

  公开了一种用于芳基硼化的Ni催化方法。该方法允许未活化烯烃的高度立体选择性芳基硼化。该反应使用简单的 Ni 催化剂，并适用于广泛的烯烃和芳基溴化物。由于 CB 键的多功能性，这些产品代表了用于化学合成的有用中间体。还公开了该方法的初步机械细节。
• [EN] SMALL MOLECULE LFA-1 INHIBITORS<br/>[FR] INHIBITEURS DE LFA-1 À PETITES MOLÉCULES
  申请人：ALLOCYTE PHARMACEUTICALS AG

  公开号：WO2015189265A1

  公开（公告）日：2015-12-17

  The present invention relates to novel compounds which are capable of inhibiting the interaction of LFA-1 with its counter ligands.

  本发明涉及一类新颖的化合物，这些化合物能够抑制LFA-1与其对抗配体的相互作用。
• Amidation Reaction of Carboxylic Acid with Formamide Derivative Using SO₃·pyridine
  作者：Shota Kawano、Kodai Saito、Tohru Yamada

  DOI：10.1246/cl.171216

  日期：2018.4.5

  The amidation reaction of carboxylic acid derivatives was developed using sulfur trioxide pyridine complex (SO3·py) as a commercially available and easily handled oxidant. This method could be applied to the reaction of various aromatic and aliphatic carboxylic acids, including optically active ones, with formamide derivatives to afford the corresponding amides in good to high yields.

  羧酸衍生物的酰胺化反应是使用三氧化硫吡啶配合物（SO3·py）作为市售且易于处理的氧化剂开发的。该方法可应用于各种芳香族和脂肪族羧酸，包括光学活性羧酸，与甲酰胺衍生物反应，以良好或高产率得到相应的酰胺。
• Chemoselective α-Sulfidation of Amides Using Sulfoxide Reagents
  作者：Mario Leypold、Kyan A. D’Angelo、Mohammad Movassaghi

  DOI：10.1021/acs.orglett.0c03160

  日期：2020.11.20

  The direct α-sulfidation of tertiary amides using sulfoxide reagents under electrophilic amide activation conditions is described. Employing convenient and readily available reagents, selective functionalization takes place to generate isolable sulfonium ions en route to α-sulfide amides. Mechanistic studies identified activated sulfoxides as promoters of the desired transformation and enabled the

  描述了在亲电子酰胺活化条件下使用亚砜试剂对叔酰胺进行直接 α-硫化。使用方便且容易获得的试剂，进行选择性官能化以在生成 α-硫醚酰胺的过程中生成可分离的锍离子。机理研究确定活化的亚砜是所需转化的促进剂，并使该方法从苄基底物扩展到脂肪族酰胺底物。
• [EN] METALLOENZYME INHIBITOR COMPOUNDS<br/>[FR] COMPOSÉS INHIBITEURS DE MÉTALLOENZYME
  申请人：VIAMET PHARMACEUTICALS INC

  公开号：WO2014117090A1

  公开（公告）日：2014-07-31

  The instant invention describes compounds having metalloenzyme modulating activity, and methods of treating diseases, disorders or symptoms thereof mediated by such metalloenzymes.

  这项即时发明描述了具有金属酶调节活性的化合物，以及治疗由这些金属酶介导的疾病、疾病或症状的方法。