3-氯苯基硼 酸片呐醇 酯 | 635305-47-4

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 3-氯苯基硼 酸片呐醇 酯
• 中文别名: 3-氯苯基硼酸片呐醇酯；3-氯苯硼酸频那醇酯
• 英文名称: 2-(3-chlorophenyl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane
• 英文别名: 3-chlorophenylboronic acid pinacol ester
• CAS: 635305-47-4
• 化学式: C₁₂H₁₆BClO₂
• 分子量: 238.522
• InChiKey: CHQKHVZXPNHWEA-UHFFFAOYSA-N

物化性质

• 沸点：
  317.9±25.0 °C(Predicted)
• 密度：
  1.1g/ml

计算性质

• 辛醇/水分配系数(LogP)：
  2.64
• 重原子数：
  16
• 可旋转键数：
  1
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.5
• 拓扑面积：
  18.5
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 海关编码：
  2934999090
• 危险性防范说明：
  P280,P305+P351+P338
• 危险性描述：
  H302
• 储存条件：
  应存放在室温、干燥、避光的环境中。

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 3-Chlorophenylboronic acid, pinacol ester
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 3-Chlorophenylboronic acid, pinacol ester
CAS number: 635305-47-4

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C12H16BClO2
Molecular weight: 238.5

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, hydrogen chloride.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  3-氯苯基硼 酸片呐醇 酯 在 copper(ll) bromide 作用下， 以 甲醇 为溶剂， 以24%的产率得到间氯溴苯
  参考文献：
  名称：

  温和条件下酚类转化为相应的芳基卤化物

  摘要：

  已经开发了温和、新颖的方法，用于通过硼酸酯中间体从相应的酚类以适度至良好的产率合成芳基卤化物。

  DOI：

  10.1055/s-2005-861791
• 作为产物：
  描述：

  3-氯苯酚 在 (1,1'-bis(diphenylphosphino)ferrocene)palladium(II) dichloride 吡啶 、 三乙胺 作用下， 以 1,4-二氧六环 、 二氯甲烷 为溶剂， 反应 0.25h， 生成 3-氯苯基硼 酸片呐醇 酯
  参考文献：
  名称：

  温和条件下酚类转化为相应的芳基卤化物

  摘要：

  已经开发了温和、新颖的方法，用于通过硼酸酯中间体从相应的酚类以适度至良好的产率合成芳基卤化物。

  DOI：

  10.1055/s-2005-861791

文献信息

• Additive- and Photocatalyst-Free Borylation of Arylazo Sulfones under Visible Light
  作者：Yuliang Xu、Xinying Yang、Hao Fang

  DOI：10.1021/acs.joc.8b01662

  日期：2018.10.19

  developed a photocatalyst-free and additive-free, visible light induced borylation reaction using arylazo sulfones as starting material. This protocol shows some advantages such as mild conditions, simple equipment, and wide substrate scope, which gives a complementary protocol for the preparation of arylboronates.

  我们开发了一种以芳基偶氮砜为起始原料的无光催化剂和无添加剂的可见光诱导的硼酸酯化反应。该方案显示出一些优点，例如温和的条件，简单的设备和广泛的底物范围，为制备芳基硼酸酯提供了补充方案。
• Visible Light-Induced Borylation of C–O, C–N, and C–X Bonds
  作者：Shengfei Jin、Hang. T. Dang、Graham C. Haug、Ru He、Viet D. Nguyen、Vu T. Nguyen、Hadi D. Arman、Kirk S. Schanze、Oleg V. Larionov

  DOI：10.1021/jacs.9b12519

  日期：2020.1.22

  photocatalytic borylation method that can effect borylation of a wide range of substrates, including strong C‒O bonds, remains elusive. Herein, we report a general, metal-free visible light-induced photocatalytic borylation platform that enables borylation of electron rich derivatives of phenols and anilines, chloroarenes, as well as other haloarenes. The reac-tion exhibits excellent functional group

  硼酸是中心重要的功能基序和合成前体。可见光诱导的硼酸化可以提供结构多样化的硼酸盐，但一种广泛有效的光催化硼酸化方法可以影响包括强 C-O 键在内的多种底物的硼化，仍然难以实现。在此，我们报告了一种通用的、无金属的可见光诱导光催化硼化平台，该平台能够对苯酚和苯胺、氯芳烃以及其他卤代芳烃的富电子衍生物进行硼化。该反应表现出优异的官能团耐受性，正如一系列结构复杂底物的硼化反应所证明的那样。值得注意的是，该反应是由吩噻嗪催化的，这是一种简单的有机光催化剂，MW< 200通过质子耦合电子转移机制介导了以前无法实现的可见光诱导的苯酚衍生物单电子还原，还原电位为~-3 V vs SCE。机理研究指出了光催化剂-碱相互作用的关键作用。
• Redox-Neutral Borylation of Aryl Sulfonium Salts via C–S Activation Enabled by Light
  作者：Chen Huang、Jie Feng、Rui Ma、Shuaishuai Fang、Tao Lu、Weifang Tang、Ding Du、Jian Gao

  DOI：10.1021/acs.orglett.9b03850

  日期：2019.12.6

  photoinduced strategy for the borylation of aryl sulfonium salts using bis(pinacolato)diboron as the boron source. This method exploits redox-neutral aryl sulfoniums to gain access to aryl radicals via C-S bond activation upon photoexcitation under transition-metal-free conditions. Therefore, it grants access to diverse arylboronate esters with good performance from easily available aryl sulfoniums accompanied

  本文报道了一种使用双（频哪醇）二硼作为硼源进行芳基sulf盐的硼化的新光诱导策略。该方法利用氧化还原中性芳基sulf在无过渡金属条件下进行光激发时通过CS键活化来获得芳基自由基。因此，它可从容易获得的芳基sulf获得具有良好性能的各种芳基硼酸酯，并伴有温和的条件，操作简便和易于扩展。
• Synthesis and Reactivity of α‐Cumyl Bromodifluoromethanesulfenate: Application to the Radiosynthesis of [ ¹⁸ F]ArylSCF ₃
  作者：Jiang Wu、Qunchao Zhao、Thomas C. Wilson、Stefan Verhoog、Long Lu、Véronique Gouverneur、Qilong Shen

  DOI：10.1002/anie.201813708

  日期：2019.2.18

  A highly reactive electrophilic bromodifluoromethylthiolating reagent, α-cumyl bromodifluoro-methanesulfenate 1, was prepared to allow for direct bromodifluoromethylthiolation of aryl boron reagents. This coupling reaction takes place under copper catalysis, and affords a large range of bromodifluoromethylthiolated arenes. These compounds are amenable to various transformations including halogen exchange

  制备了高反应性的亲电溴二氟甲基硫醇化试剂，α-枯基溴二氟甲基甲磺酸盐1，以允许芳基硼试剂的直接溴二氟甲基硫醇化。该偶联反应在铜催化下发生，并提供了大范围的溴二氟甲基硫醇化的芳烃。这些化合物可进行各种转化，包括与[18 F] KF / K222进行卤素交换，该过程可从相应的芳基硼酸频哪醇酯分两步获得[18 F]芳基SCF3。
• Enantioselective Synthesis of Functionalized Arenes by Nickel‐Catalyzed Site‐Selective Hydroarylation of 1,3‐Dienes with Aryl Boronates
  作者：Justin S. Marcum、Tiffany R. Taylor、Simon J. Meek

  DOI：10.1002/anie.202004982

  日期：2020.8.10

  A catalytic method for the site‐selective and enantioselective synthesis of functionalized arenes by the intermolecular hydroarylation of terminal and internal 1,3‐dienes with aryl pinacolato boronates is reported. The reactions are promoted by 5.0 mol % of a readily available monodentate phosphoramidite‐Ni complex in ethanol, affording a variety of enantioenriched products in up to 96 % yield and

  报道了一种通过端基和内部1,3-二烯与芳基频哪醇硼酸酯的分子间氢芳基化反应来催化官能化芳烃的选择性和对映选择性合成的催化方法。5.0 mol％的乙醇中容易获得的单齿亚磷酰胺-Ni络合物可促进反应，从而以高达96％的收率和99：1 er提供多种对映体富集的产品。机理研究表明，Ni-烯丙基的形成是不可逆的，并且与芳基硼酸酯的性质有关。