摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

(R)-(+)-2,2-dimethyl-6-methylene-1-[1'-(phenylthio)methyl]cyclohexane | 502763-41-9

中文名称
——
中文别名
——
英文名称
(R)-(+)-2,2-dimethyl-6-methylene-1-[1'-(phenylthio)methyl]cyclohexane
英文别名
[(1R)-2,2-dimethyl-6-methylidenecyclohexyl]methylsulfanylbenzene
(R)-(+)-2,2-dimethyl-6-methylene-1-[1'-(phenylthio)methyl]cyclohexane化学式
CAS
502763-41-9
化学式
C16H22S
mdl
——
分子量
246.417
InChiKey
PQRLXDJLAKNANH-HNNXBMFYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    336.9±11.0 °C(Predicted)
  • 密度:
    1.00±0.1 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    5.16
  • 重原子数:
    17.0
  • 可旋转键数:
    3.0
  • 环数:
    2.0
  • sp3杂化的碳原子比例:
    0.5
  • 拓扑面积:
    0.0
  • 氢给体数:
    0.0
  • 氢受体数:
    1.0

反应信息

  • 作为反应物:
    描述:
    (R)-(+)-2,2-dimethyl-6-methylene-1-[1'-(phenylthio)methyl]cyclohexane 在 ammonium molybdate 、 双氧水 作用下, 以 甲醇 为溶剂, 反应 8.0h, 生成 (R)-(-)-1-[1'-(benzenesulfonyl)methyl]-2,2-dimethyl-6-methylenecyclohexane
    参考文献:
    名称:
    结构上与Pallescensins1⁻2有关的呋喃半萜的立体选择性合成的一般策略。
    摘要:
    在这里,我们描述了与pallescensin 1-2结构相关的海洋呋喃型倍半萜的一般立体选择性合成。以高化学和异构体纯度获得了pallescensin 1,pallescensin 2和dihydropallescensin 2的立体异构体形式,而isomicrocionin-3则是首次合成。倍半萜骨架是通过C 10环香叶基部分与C 5 3-(亚甲基)呋喃部分的偶联而建立的。我们合成方法的关键步骤是立体选择合成四种环香叶醇异构体,将其转化为相应的环香叶基磺酰基苯衍生物,将其与3-(氯甲基)呋喃进行烷基化以及最后对苯磺酰基官能团进行还原性裂解以提供整个倍半萜烯骨架。
    DOI:
    10.3390/md17040245
  • 作为产物:
    描述:
    (R)-(2,2-dimethyl-6-methylenecyclohexyl)methyl acetate 在 potassium carbonate 、 sodium hydroxide 作用下, 以 甲醇二甲基亚砜 为溶剂, 反应 12.0h, 生成 (R)-(+)-2,2-dimethyl-6-methylene-1-[1'-(phenylthio)methyl]cyclohexane
    参考文献:
    名称:
    结构上与Pallescensins1⁻2有关的呋喃半萜的立体选择性合成的一般策略。
    摘要:
    在这里,我们描述了与pallescensin 1-2结构相关的海洋呋喃型倍半萜的一般立体选择性合成。以高化学和异构体纯度获得了pallescensin 1,pallescensin 2和dihydropallescensin 2的立体异构体形式,而isomicrocionin-3则是首次合成。倍半萜骨架是通过C 10环香叶基部分与C 5 3-(亚甲基)呋喃部分的偶联而建立的。我们合成方法的关键步骤是立体选择合成四种环香叶醇异构体,将其转化为相应的环香叶基磺酰基苯衍生物,将其与3-(氯甲基)呋喃进行烷基化以及最后对苯磺酰基官能团进行还原性裂解以提供整个倍半萜烯骨架。
    DOI:
    10.3390/md17040245
点击查看最新优质反应信息

文献信息

  • Synthesis of (+)-trixagol and its enantiomer, the terpenoid side chain of (−)-agelasine E
    作者:Anne Kristin Bakkestuen、Lise-Lotte Gundersen
    DOI:10.1016/s0040-4020(02)01455-2
    日期:2003.1
    The naturally occurring gamma-cyclogeranylgeraniol called (+)-trixagol has been synthesised for the first time. Trixagol was readily available in five steps from (S)-2,2-dimethyl-6-methylene-1-cyclohexanemethanol. The enantiomer of trixagol, which equates to the terpenoid side chain of the naturally occurring 7,9-dialkylpurinium salt (-)-agelasine E, was prepared from the (R) enantiomer of the cyclohexanemethanol. Both trixagol enantiomers were moderately active against Mycobacterium tuberculosis. (C) 2002 Elsevier Science Ltd. All rights reserved.
  • A General Strategy for the Stereoselective Synthesis of the Furanosesquiterpenes Structurally Related to Pallescensins 1–2
    作者:Stefano Serra
    DOI:10.3390/md17040245
    日期:——
    Here, we describe a general stereoselective synthesis of the marine furanosesquiterpenes structurally related to pallescensins 1-2. The stereoisomeric forms of the pallescensin 1, pallescensin 2, and dihydropallescensin 2 were obtained in high chemical and isomeric purity, whereas isomicrocionin-3 was synthesized for the first time. The sesquiterpene framework was built up by means of the coupling
    在这里,我们描述了与pallescensin 1-2结构相关的海洋呋喃型倍半萜的一般立体选择性合成。以高化学和异构体纯度获得了pallescensin 1,pallescensin 2和dihydropallescensin 2的立体异构体形式,而isomicrocionin-3则是首次合成。倍半萜骨架是通过C 10环香叶基部分与C 5 3-(亚甲基)呋喃部分的偶联而建立的。我们合成方法的关键步骤是立体选择合成四种环香叶醇异构体,将其转化为相应的环香叶基磺酰基苯衍生物,将其与3-(氯甲基)呋喃进行烷基化以及最后对苯磺酰基官能团进行还原性裂解以提供整个倍半萜烯骨架。
查看更多