The hydrothermal treatment is based on placing the crude residual plant material in contact with hot water in a closed reactor, comprising the following steps:
a) placing the material to be treated in contact with water in a closed reactor, and adjusting the solid/liquid ratio so that it ranges from 1/5 to 1/15 (w/v):
b) stirring;
c) heating to a temperature between 180 and 240° C., and at a pressure so that the water is maintained in liquid phase;
d) constantly stirring the mixture for a time period between 4 and 30 minutes; and
e) cooling the reactor to approximately 40° C., unloading the mixture, filtering and recovering the liquid fraction.
水热处理是基于将原始残留植物材料与热
水接触在一个封闭反应器中,包括以下步骤:a) 将待处理材料与
水接触在一个封闭反应器中,并调整固液比,使其范围在1/5到1/15(w/v)之间;b) 搅拌;c) 加热至180至240°C的温度,并在压力下使
水保持液态;d) 持续搅拌混合物,时间为4至30分钟;以及e) 冷却反应器至约40°C,卸载混合物,过滤和回收液相。