Material Safety Data Sheet Section 1. Identification of the substance Product Name: 4-Morpholino-3-nitrobenzotrifluoride Synonyms: 4-[2-Nitro-4-(trifluoromethyl)phenyl]morpholine Section 2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. Section 3. Composition/information on ingredients. Ingredient name: 4-Morpholino-3-nitrobenzotrifluoride CAS number: 62054-72-2 Section 4. First aid measures Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section 5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section 6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution: Wear approved mask/respirator Hand precaution: Wear suitable gloves/gauntlets Skin protection: Wear suitable protective clothing Eye protection: Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section 7. Handling and storage Handling: This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels. Storage: Section 8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section 9. Physical and chemical properties Appearance: Not specified Boiling point: No data No data Melting point: Flash point: No data Density: No data Molecular formula: C11H11F3N2O3 Molecular weight: 276.2 Section 10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen fluoride. Section 11. Toxicological information No data. Section 12. Ecological information No data. Section 13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section 14. Transportation information Non-harzardous for air and ground transportation. Section 15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313.
Optimisation of 2-(N-phenyl carboxamide) triazolopyrimidine antimalarials with moderate to slow acting erythrocytic stage activity
作者:Brodie L. Bailey、William Nguyen、Anna Ngo、Christopher D. Goodman、Maria R. Gancheva、Paola Favuzza、Laura M. Sanz、Francisco-Javier Gamo、Kym N. Lowes、Geoffrey I. McFadden、Danny W. Wilson、Benoît Laleu、Stephen Brand、Paul F. Jackson、Alan F. Cowman、Brad E. Sleebs
DOI:10.1016/j.bioorg.2021.105244
日期:2021.10
the Janssen Jumpstarter library against the asexual stages of the P. falciparum parasite. Here we describe the structure activity relationship of the identified class and the optimisation of asexual stage activity while maintaining selectivity against the human HepG2 cell line. The most potent analogues from this study were shown to exhibit equipotent activityagainst P. falciparum multidrug resistant
Decarboxylative <i>ipso</i>
Amination of Activated Benzoic Acids
作者:Martin Pichette Drapeau、Janet Bahri、Dominik Lichte、Lukas J. Gooßen
DOI:10.1002/anie.201812068
日期:2019.1.14
the ligand and either air or N‐methylmorpholine N‐oxide as the oxidant, electron‐deficient benzoic acids undergo oxidative decarboxylative coupling with unprotected amines. This operationally simple aniline synthesis is widely applicable with respect to the amine and gives good yields, even on multigram scale. The orthogonality of this reaction to other Pd‐catalyzedcross‐couplings allows the concise
Electrooptic chromophores with large optical birefringence for applications at high speed and short wavelengths
申请人:McGinniss D. Vincent
公开号:US20060106262A1
公开(公告)日:2006-05-18
Disclosed is a series of materials, which exhibit large birefringence under the influence of an applied electric field. These materials are capable of switching this large birefringence with a characteristic time on the order of 1 microsecond or less. In addition, these materials have good optical loss at this wavelength, and are stable under irradiation. These materials are suitable for fabrication of optical devices such a variable optical attenuators, switches, and modulators that respond in these time frames or slower. These materials are also suitable for use across a wide range of wavelengths. As a second component of this invention, some of these novel materials exhibit these desired optical properties (large birefringence, low loss, stability under illumination) at wavelengths as short as about 400 nm. These materials are suitable for fabrication of optical devices operating at or about 405 nm, where conventional EO materials strongly absorb and/or quickly degrade.
Synthesis of 3,6-Disubstituted-2-nitrotoruenes by Methylation of Aromatic Nitrocompounds with Dimethylsulfonium Methylide
作者:Masafumi Kitano、Naohito Ohashi
DOI:10.1080/00397910008087046
日期:2000.12
Abstract 3,6-disubstituted-2-nitrotoluenes were obtained in moderate yield by methylation of 2,5-disubstituted nitrobenzenes with dimethylsulfoniummethylide in DMSO-THF mixture.
(2-Aminophenyl)morpholine compounds having a haloalkyl, lower alkylsulfonyl, halo-lower alkylsulfonyl, or branched-chain alkyl substituent on the aromatic ring para to the morpholino nitrogen. The compounds are useful as herbicides and may be used as intermediates for making herbicidal compounds.