摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

溴甲基硼酸二异丙基酯 | 137297-49-5

中文名称
溴甲基硼酸二异丙基酯
中文别名
(溴甲基)硼酸二异丙基酯;(溴代甲基)硼酸二异丙酯
英文名称
(bromomethyl)boronic acid bis(isopropyl)ester
英文别名
diisopropyl (bromomethyl) boronate;diisopropyl (bromomethyl)boronate;diisopropyl bromomethaneboronate;diisopropyl(bromomethyl)boronate;diisopropoxy bromomethyl borane;diisopropyl bromomethylboronate;bromomethyl-di(propan-2-yloxy)borane
溴甲基硼酸二异丙基酯化学式
CAS
137297-49-5
化学式
C7H16BBrO2
mdl
——
分子量
222.918
InChiKey
FNHYYZNZIWONBQ-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    63-71 °C(Press: 6 Torr)
  • 密度:
    1.156±0.06 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    2.26
  • 重原子数:
    11
  • 可旋转键数:
    5
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    1.0
  • 拓扑面积:
    18.5
  • 氢给体数:
    0
  • 氢受体数:
    2

安全信息

  • 危险等级:
    3
  • 危险品标志:
    Xi
  • 危险品运输编号:
    UN 3272
  • 包装等级:
    III
  • 危险类别:
    3
  • 储存条件:
    密封、冷藏保存

SDS

SDS:22420abaee4664ca242ce7a722a465ac
查看
Diisopropyl (Bromomethyl)boronate Revision number: 5
SAFETY DATA SHEET

Section 1. IDENTIFICATION
Product name: Diisopropyl (Bromomethyl)boronate

Revision number: 5

Section 2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 3
Flammable liquids
HEALTH HAZARDS
Category 2
Skin corrosion/irritation
Serious eye damage/eye irritation Category 2A
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal word Warning
Hazard statements Flammable liquid and vapour
Causes skin irritation
Causes serious eye irritation
Precautionary statements:
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
[Prevention]
Keep container tightly closed.
Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary
measures against ignition by the static discharge and the spark.
Wash hands thoroughly after handling.
Wear protective gloves/eye protection/face protection.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
[Response]
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse
skin with water/shower.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
[Storage] Store in a well-ventilated place. Keep cool.
[Disposal] Dispose of contents/container through a waste management company authorized by
the local government.
Diisopropyl (Bromomethyl)boronate

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture: Substance
Components: Diisopropyl (Bromomethyl)boronate
Percent: >95.0%(GC)
CAS Number: 137297-49-5
Synonyms: (Bromomethyl)boronic Acid Diisopropyl Ester
Chemical Formula: C7H16BBrO2

Section 4. FIRST AID MEASURES
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Inhalation:
Get medical advice/attention if you feel unwell.
Skin contact: Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion: Get medical advice/attention if you feel unwell. Rinse mouth.
Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

Section 5. FIRE-FIGHTING MEASURES
Suitable extinguishing Dry chemical, foam, water spray, carbon dioxide.
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical: generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Keep containers cool by
spraying with water. Eliminate all ignition sources if safe to do so.
Special protective When extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

Section 6. ACCIDENTAL RELEASE MEASURES
Use personal protective equipment. Keep people away from and upwind of spill/leak.
Personal precautions,
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in dry sand or inert absorbent before recovering it into an
containment and cleaning airtight container. In case of large amount of spillage, contain a spill by bunding.
up: Adhered or collected material should be promptly disposed of, in accordance with
appropriate laws and regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards: case of a fire. Use spark-proof tools and explosion-proof equipment.

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures: Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapour or mist. Keep away from heat/sparks/open flame/hot
surfaces. -No smoking. Take measures to prevent the build up of electrostatic
charge. Use explosion-proof equipment. Wash hands and face thoroughly after
handling.
Use a closed system if possible. Use a ventilation, local exhaust if vapour or aerosol
will be generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Keep container tightly closed. Store in an explosion-poof refregerator.
Storage conditions:
Diisopropyl (Bromomethyl)boronate

Section 7. HANDLING AND STORAGE
Store under inert gas.
Protect from moisture.
Store away from incompatible materials such as oxidizing agents.
Heat-sensitive, Moisture-sensitive
Packaging material: Comply with laws.

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection: Protective gloves.
Eye protection: Safety glasses. A face-shield, if the situation requires.
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C): Liquid
Form: Clear
Colour: Colorless - Pale yellow
Odour: No data available
pH: No data available
Melting point/freezing point:No data available
Boiling point/range: No data available
Flash point: No data available
Flammability or explosive
limits:
No data available
Lower:
Upper: No data available
No data available
Relative density:
Solubility(ies):
[Water] No data available
[Other solvents] No data available

Section 10. STABILITY AND REACTIVITY
Stable under proper conditions.
Chemical stability:
Possibility of hazardous No special reactivity has been reported.
reactions:
Conditions to avoid: Spark, Open flame, Static discharge
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Boron oxides , Hydrogen bromide
products:

Section 11. TOXICOLOGICAL INFORMATION
No data available
Acute Toxicity:
Skin corrosion/irritation: No data available
No data available
Serious eye
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC = No data available
NTP = No data available
Reproductive toxicity: No data available

Section 12. ECOLOGICAL INFORMATION
Ecotoxicity:
No data available
Fish:
Crustacea: No data available
Diisopropyl (Bromomethyl)boronate

Section 12. ECOLOGICAL INFORMATION
Algae: No data available
Persistence / degradability: No data available
Bioaccumulative No data available
potential(BCF):
Mobility in soil
No data available
Log Pow:
Soil adsorption (Koc): No data available
No data available
Henry's Law
constant(PaM3/mol):

Section 13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

Section 14. TRANSPORT INFORMATION
3: Flammable liquid.
Hazards Class:
UN-No: 3272
Esters, n.o.s.
Proper shipping name:
Packing group: III

Section 15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.


SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

  • 作为反应物:
    描述:
    溴甲基硼酸二异丙基酯偶氮二异丁腈三(三甲基硅基)硅烷 作用下, 以 正己烷 为溶剂, 反应 36.0h, 生成
    参考文献:
    名称:
    Tethered α-boryl radical cyclizations of haloalkyl boronates
    摘要:
    Boroalkyl radicals readily cyclize onto alkenyl and alkynyl traps tethered via a C-B-O linkage. Oxidative cleavage-of the C-B bond of the temporary connection following cyclization affords 1,3-diols in good yields. (C) 1999 Elsevier Science Ltd. All rights reserved.
    DOI:
    10.1016/s0040-4039(99)01970-x
  • 作为产物:
    描述:
    Lithium;bromomethyl-tri(propan-2-yloxy)boranuide 生成 溴甲基硼酸二异丙基酯
    参考文献:
    名称:
    连续流动化学法合成三氟硼酸溴甲基酯
    摘要:
    开发了一种连续流法来合成溴甲基三氟硼酸钾,这是铃木-宫浦偶联剂的关键前体。连续流法用于生产从克到千克的规模的溴甲基三氟硼酸钾,成功的过程利用了分批合成所需资源的一小部分。在该工厂中,一个由三个人组成的小组在不到4周的时间内生产了约100千克溴甲基三氟硼酸钾。此过程使得使用溴代甲基三氟硼酸钾及其衍生物进行多千克级的Suzuki-Miyaura偶联既实用又经济。
    DOI:
    10.1021/op400090a
点击查看最新优质反应信息

文献信息

  • Lewis Acid Catalyzed Allylboration:  Discovery, Optimization, and Application to the Formation of Stereogenic Quaternary Carbon Centers
    作者:Jason W. J. Kennedy、Dennis G. Hall
    DOI:10.1021/jo049773m
    日期:2004.6.1
    A full account of the development of the first catalytic manifold for the additions of allylboronates to aldehydes is described. The thermal additions (both diastereospecific and enantioselective) of 2-carboxyester 3,3-disubstituted allylboronates 1 to both aromatic and aliphatic aldehydes give biologically and synthetically important exo-methylene butyrolactones 2 containing a β-quaternary carbon
    描述了将烯丙基硼酸酯加成到醛中的第一催化歧管的发展的完整说明。将2-羧酸酯3,3-二取代的烯丙基硼酸酯1热加成(非对映体特异性和对映体选择性)对芳香族和脂肪族醛均具有生物学和合成意义的外亚甲基丁内酯2包含一个β-季碳中心。尽管热反应在室温下需要14 d才能完成,但是某些金属盐的存在可以使反应12-16 h,同时保留未催化过程中观察到的非对映特异性。描述了对催化作用起源的初步机理研究,以及内酯2立体选择性转化为环状和非环状的立体三单元体,具有潜在的合成中间体用途。
  • [EN] NOVEL CYCLIC BORONATE INHIBITORS OF HCV REPLICATION<br/>[FR] NOUVEAUX INHIBITEURS DE BORONATE CYCLIQUES DE RÉPLICATION DU VIRUS DE L'HÉPATITE C
    申请人:SMITHKLINE BEECHAM CORP
    公开号:WO2009046098A1
    公开(公告)日:2009-04-09
    Compounds of formula (I) or a salt thereof are provided; wherein R1, R2, R3, R4, R6, R8, R20, R30, Y, Z and n are as defined in the description. Uses of the compounds as medicaments, and in the manufacture of medicaments for treating viral infection, especially HCV infection are also disclosed. The invention further comprises processes to make these compounds and pharmaceutical formulations thereof.
    提供了化学式(I)的化合物或其盐;其中R1、R2、R3、R4、R6、R8、R20、R30、Y、Z和n的定义如描述中所述。还公开了将这些化合物用作药物以及用于治疗病毒感染,特别是HCV感染的药物制造中的用途。该发明还包括制备这些化合物和其药物配方的过程。
  • Alternating Radical Stabilities: A Convergent Route to Terminal and Internal Boronates
    作者:Qi Huang、Jean Michalland、Samir Z. Zard
    DOI:10.1002/anie.201906497
    日期:2019.11.18
    on the boron atom, thus stabilizing or not stabilizing the corresponding adjacent radical, it is possible to control the behavior of α-boronyl xanthates and construct a large variety of terminal or internal boronates in a modular fashion. The remarkable tolerance of polar groups and the ability to introduce quaternary centers are particularly noteworthy features of this process.
    与硼被sp3-杂化的二乙醇胺基硼酸酯[B(DEA)]相比,硼上具有空p轨道的品纳可乐硼酸酯(Bpin)可以稳定相邻的碳原子团。通过将频哪醇或二乙醇胺部分交替地放置在硼原子上,从而稳定或不稳定相应的相邻基团,可以控制α-硼基黄原酸酯的行为,并以模块化的方式构建多种末端或内部的硼酸酯。极性基团的显着耐受性和引入四元中心的能力在此过程中特别值得注意。
  • Synthesis of a (β-acetamido-α-acetoxyethyl)boronic ester via azido boronic esters
    作者:Donald S. Matteson、Davis Maliakal、Levente Fabry-Asztalos
    DOI:10.1016/j.jorganchem.2008.03.031
    日期:2008.6
    (Azidomethyl)boronic esters of 1,2-dicyclohexyl-1,2-ethanediol (“DICHED”) and pinanediol have been prepared from the corresponding (bromomethyl)boronic esters. Conversion to (2-azido-1-chloro- or bromoethyl)boronic esters by reaction with a (dihalomethyl)lithium followed. Attempted displacement of halide from DICHED (2-azido-1-haloethyl)boronates with alkoxides failed. Reaction of either pinanediol
    由相应的(溴甲基)硼酸酯已经制备了1,2-二环己基-1,2-乙二醇(“叠氮基”)硼酸酯(“ DICHED”)和pin烷二醇。然后通过与(二卤甲基)锂反应转化为(2-叠氮基-1-氯-或溴乙基)硼酸酯。尝试用醇盐从DICHED(2-叠氮基-1-卤代乙基)硼酸酯中取代卤化物失败。pin烷二醇或DICHED(2-叠氮基-1-氯甲基)硼酸酯与乙酸钠在乙酸中的反应生成1-乙酰氧基衍生物,为约1:1的非对映异构体混合物,表明α-硼烷基碳正离子中间体可能参与其中。在氯化氢在二恶烷溶液中的铂上的pin烷二醇叠氮基硼酸酯在铂上的氢化伴随脱乙酰基化反应,形成不纯的(2-氨基-1-羟乙基)硼酸酯盐酸盐。尝试纯化该物质导致脱硼为乙醇胺。乙酰化得到pin二醇(2-乙酰氨基-1-乙酰氧基乙基)硼酸酯。
  • YAP/TAZ-TEAD 상호작용의 억제제인 신규 화합물 및 악성 중피종의 치료에서의 이들의 용도
    申请人:INVENTIVA 엥방티바(520140524752)
    公开号:KR20190137803A
    公开(公告)日:2019-12-11
    본 발명은 화학식: 의 화합물에 관한 것이며, 여기서 R 내지 R은 설명부에 정의된 바와 같다. 이들 화합물은 YAP/TAZ-TEAD 상호작용의 억제제로서 유용하다.
    本发明涉及化学式中的化合物,其中R至R如描述部分中所定义。这些化合物对YAP/TAZ-TEAD相互作用的抑制剂具有用处。
查看更多