2,6-二氯-4-(三氟甲基)苯磺酰氯 | 175205-76-2

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 2,6-二氯-4-(三氟甲基)苯磺酰氯
• 英文名称: 2,6-dichloro-4-(trifluoromethyl)benzenesulfonyl chloride
• 英文别名: 2,6-Dichloro-4-(trifluoromethyl)benzene-1-sulfonyl chloride
• CAS: 175205-76-2
• 化学式: C₇H₂Cl₃F₃O₂S
• mdl: MFCD00220929
• 分子量: 313.512
• InChiKey: MRGIKDMKHORAMU-UHFFFAOYSA-N

物化性质

• 熔点：
  47 °C
• 沸点：
  297.5±40.0 °C(Predicted)
• 密度：
  1.708±0.06 g/cm3(Predicted)
• 稳定性/保质期：

  避免高温、火焰、强光和水分。

计算性质

• 辛醇/水分配系数(LogP)：
  4.1
• 重原子数：
  16
• 可旋转键数：
  1
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.142
• 拓扑面积：
  42.5
• 氢给体数：
  0
• 氢受体数：
  5

安全信息

• 危险等级：
  IRRITANT, CORROSIVE
• 危险品标志：
  C
• 危险类别码：
  R34
• 危险品运输编号：
  3261
• 海关编码：
  2904909090
• 包装等级：
  II
• 安全说明：
  S26,S36/37/39,S45
• 储存条件：
  保存方法：密封于阴凉、通风干燥处。

SDS

Name:	2 6-Dichloro-4-(trifluoromethyl)benzene-1-sulfonyl chloride 95+% Material Safety Data Sheet
Synonym:
CAS:	175205-76-2

Section 1 - Chemical Product MSDS Name:2 6-Dichloro-4-(trifluoromethyl)benzene-1-sulfonyl chloride 95+% Material Safety Data Sheet
Synonym:

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
175205-76-2	2,6-Dichloro-4-(trifluoromethyl)benzen	95+%	unlisted

Hazard Symbols: C
Risk Phrases: 34

---

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

---

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.

---

Section 7 - HANDLING and STORAGE
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store under nitrogen.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 175205-76-2: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 47 - 49 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C7H2Cl3F3O2S
Molecular Weight: 314

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, carbon monoxide, oxides of sulfur, carbon dioxide, hydrogen fluoride gas, fluorine.
Hazardous Polymerization: Has not been reported

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 175205-76-2 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2,6-Dichloro-4-(trifluoromethyl)benzene-1-sulfonyl chloride - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 175205-76-2: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 175205-76-2 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 175205-76-2 is not listed on the TSCA inventory.
It is for research and development use only.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  N-[4-氯-3-(2-二甲氨基乙氧基)苯基]乙酰胺 、 2,6-二氯-4-(三氟甲基)苯磺酰氯 生成 2,6-二氯-N-[4-氯-3-[2-(二甲基氨基)乙氧基]苯基]-4-(三氟甲基)苯磺酰胺
  参考文献：
  名称：

  Urotensin-II receptor antagonists

  摘要：

  P51084本发明涉及磺胺类化合物、含有它们的药物组合物及其作为尿腺素II拮抗剂的用途。

  公开号：

  US20030100580A1

文献信息

• SUBSTITUTED SULFONAMIDE COMPOUNDS
  申请人：OBERBOERSCH Stefan

  公开号：US20080153843A1

  公开（公告）日：2008-06-26

  Substituted sulfonamide derivatives, a process for their preparation, pharmaceutical compositions containing these compounds, and to the use of substituted sulfonamide derivatives in the treatment or inhibition of pain and/or various disorders or disease states.

  磺胺取代物，其制备方法，含有这些化合物的药物组合物，以及磺胺取代物在治疗或抑制疼痛和/或各种疾病或疾病状态中的用途。
• Substituted Disulfonamide Compounds
  申请人：REICH Melanie

  公开号：US20100152158A1

  公开（公告）日：2010-06-17

  Substituted disulfonamide compounds corresponding to formula I: In which R 1 , R 2 , R 3 , R 4a , R 4b , R 5a , R 5b , R 8 , R 9a , R 9b , R 10 , R 11 , a, b, s, t and A have defined meanings, pharmaceutical compositions containing one or more such compounds, processes for preparing such compounds, and a method of using such compounds for the treatment or inhibition of pain and/or other conditions mediated by the bradykinin receptor 1 (BR1).

  将对应于公式I的取代二磺酰胺化合物： 其中R 1 ，R 2 ，R 3 ，R 4a ，R 4b ，R 5a ，R 5b ，R 8 ，R 9a ，R 9b ，R 10 ，R 11 ，a，b，s，t和A具有定义的含义，包含一种或多种此类化合物的药物组合物，制备这种化合物的方法，以及使用这种化合物治疗或抑制由激肽酶受体1（BR1）介导的疼痛和/或其他病症的方法。
• Substituted Spiro-amide Compounds
  申请人：Schunk Stefan

  公开号：US20100249095A1

  公开（公告）日：2010-09-30

  Substituted spiro-amide compounds corresponding to formula I in which R5 through R8, D, X, Y and Z have defined meanings, processes for preparing such spiro-amide compounds, pharmaceutical compositions containing such compounds, and methods of using such spiro-amide compounds for treating and/or inhibiting disorders or disease states mediated at least in part by the bradykinin 1 receptor.

  将与式I相对应的螺环酰胺化合物替代为R5至R8、D、X、Y和Z具有定义含义的过程，用于制备这种螺环酰胺化合物，含有这种化合物的药物组合物，以及使用这种螺环酰胺化合物治疗和/或抑制至少部分由激肽酶1受体介导的疾病或疾病状态的方法。
• Substituted Sulfonamide Compounds
  申请人：OBERBOERSCH Stefan

  公开号：US20080249128A1

  公开（公告）日：2008-10-09

  Substituted sulfonamide compounds with bradykinin receptor (B1R) modulating activity; processes for the preparation thereof, pharmaceutical compositions comprising such compounds, and methods of using such compounds to treat or inhibit pain and/or other disorders and/or disease states.

  用具有激肽酶受体（B1R）调节活性的磺胺化合物替代；制备这些化合物的方法，包括这些化合物的药物组合物，以及使用这些化合物治疗或抑制疼痛和/或其他疾病状态的方法。
• Phenylenediamine urotensin-II receptor antagonists and CCR-9 antagonists
  申请人：Wu Chengde

  公开号：US20050049286A1

  公开（公告）日：2005-03-03

  The present invention relates to urotensin II receptor antagonists, CCR-9 antagonists, pharmaceutical compositions containing them and their use.

  这项发明涉及尿泉素II受体拮抗剂、CCR-9拮抗剂、含有它们的药物组合物以及它们的用途。