2-氟-3-甲基苯甲醛 | 886762-64-7

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 2-氟-3-甲基苯甲醛
• 英文名称: 2-fluoro-3-methylbenzaldehyde
• CAS: 886762-64-7
• 化学式: C₈H₇FO
• 分子量: 138.141
• InChiKey: CERGYJCALDGESV-UHFFFAOYSA-N

物化性质

• 沸点：
  197℃
• 密度：
  1.136
• 闪点：
  79℃

计算性质

• 辛醇/水分配系数(LogP)：
  1.8
• 重原子数：
  10
• 可旋转键数：
  1
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.12
• 拓扑面积：
  17.1
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 海关编码：
  2913000090
• 危险性防范说明：
  P261,P280,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H332,H335
• 储存条件：
  室温

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 2-Fluoro-3-methylbenzaldehyde
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 2-Fluoro-3-methylbenzaldehyde
CAS number: 886762-64-7

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels, refrigerated.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C8H7FO
Molecular weight: 138.1

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, hydrogen fluoride.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  2-氟-3-甲基苯甲醛 在 甲醇 、 sodium tetrahydroborate 作用下， 反应 0.17h， 生成 2-氟-3-甲基苄醇
  参考文献：
  名称：

  2-卤代-N-Ms-芳基胺与苄基卤化物/磺酸盐的钯催化级联反应合成菲啶

  摘要：

  已经描述了容易获得的 2-卤代-N-Ms-芳基胺（Ms = 甲磺酰基）和苄基卤化物/磺酸盐之间的有效钯催化亲核取代/C-H 活化/芳构化级联反应。以一锅法以中等至高产率 (37–86%) 合成了多种菲啶。值得注意的是，该方法为菲啶的合成提供了一种直接、简便的方法。通过成功进行克级制备进一步证实了实用性。

  DOI：

  10.1002/ejoc.201601608

文献信息

• One-pot synthesis of substituted indolo[1,2-a]quinolines under transition-metal-free conditions
  作者：Adisak Thanetchaiyakup、Hassayaporn Rattanarat、Nutthawat Chuanopparat、Paiboon Ngernmeesri

  DOI：10.1016/j.tetlet.2018.01.085

  日期：2018.3

  A simple and efficient one-pot synthesis of substituted indolo[1,2-a]quinolines under transition-metal-free conditions has been developed. When 2-fluorobenzaldehyde was treated with substituted 2-methylindoles in the presence of Cs2CO3, the desired products were typically obtained in good to excellent yields. This reaction sequence involves a nucleophilic aromatic substitution and a Knoevenagel condensation

  已经开发了一种在无过渡金属条件下简单高效的一锅合成取代吲哚[1,2- a ]喹啉的方法。当在Cs 2 CO 3存在下用取代的2-甲基吲哚处理2-氟苯甲醛时，通常以良好或优异的产率获得所需产物。该反应序列涉及亲核芳族取代和Knoevenagel缩合反应。我们的机理研究表明，第一步中两个反应都可能以分子间反应的形式进行。
• 5-Membered heterocyclic compound
  申请人：Nishida Haruyuki

  公开号：US20090156642A1

  公开（公告）日：2009-06-18

  The present invention provides 5-membered heterocycle compounds represented by the following general formula (I): The present compounds have a superior acid secretion inhibitory effect, and shows an antiulcer activity and the like.

  本发明提供了以下通式(I)表示的5元杂环化合物： 本化合物具有优异的抑制胃酸分泌效果，并显示出抗溃疡活性等。
• Inhibitors of c-Jun N-terminal kinases
  申请人：Liu Gang

  公开号：US20060173050A1

  公开（公告）日：2006-08-03

  The present invention relates to compounds that are inhibitors of c-jun N-terminal kinase 1, 2, or 3 (JNK1, JNK2, or JNK3), compositions containing the compounds and the use of the compounds in the prevention or treatment of disorders regulated by the activation of JNK1, JNK2 and JNK3.

  本发明涉及作为c-jun N-末端激酶1、2或3（JNK1、JNK2或JNK3）抑制剂的化合物，包含这些化合物的组合物以及这些化合物在预防或治疗由JNK1、JNK2和JNK3激活调控的疾病中的用途。
• [EN] BENZENESULFONAMIDE COMPOUNDS AND THEIR USE AS THERAPEUTIC AGENTS<br/>[FR] COMPOSÉS BENZÈNESULFONAMIDES ET LEUR UTILISATION EN TANT QU'AGENTS THÉRAPEUTIQUES
  申请人：XENON PHARMACEUTICALS INC

  公开号：WO2017201468A1

  公开（公告）日：2017-11-23

  This invention is directed to benzenesulfonamide compounds, as stereoisomers, enantiomers, tautomers thereof or mixtures thereof; or pharmaceutically acceptable salts, solvates or prodrugs thereof, for the treatment of diseases or conditions associated with voltage-gated sodium channels, such as epilepsy.

  本发明涉及苯磺酰胺化合物，包括它们的立体异构体、对映异构体、互变异构体或其混合物；或用于治疗与电压门控钠通道相关的疾病或病症的药用可接受盐、溶剂化物或前药，例如癫痫。
• [EN] PEPTIDE MACROCYCLES AGAINST ACINETOBACTER BAUMANNII<br/>[FR] MACROCYCLES PEPTIDIQUES CONTRE ACINETOBACTER BAUMANNII
  申请人：HOFFMANN LA ROCHE

  公开号：WO2017072062A1

  公开（公告）日：2017-05-04

  The present invention provides compounds of formula (I) wherein X1 to X8 and R1 to R8 are as described herein, as well as pharmaceutically acceptable salts thereof. Further the present invention is concerned with the manufacture of the compounds of formula (I), pharmaceutical compositions comprising them and their use as medicaments for the treatment of diseases and infections caused by Acinetobacter baumannii.

  本发明提供了式（I）的化合物，其中X1至X8和R1至R8如本文所述，以及其药学上可接受的盐。此外，本发明涉及制备式（I）的化合物，包括它们的药物组合物以及它们作为治疗由鲍曼不动杆菌引起的疾病和感染的药物的用途。