摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

丁基二硫代氨基甲酸 | 18879-99-7

中文名称
丁基二硫代氨基甲酸
中文别名
——
英文名称
butyldithiocarbamic acid
英文别名
N-butyldithiocarbamic acid;Butyl-dithiocarbamidsaeure;Dithiokohlensaeure-butylamid;Methanedithioic acid, butylamino-;butylcarbamodithioic acid
丁基二硫代氨基甲酸化学式
CAS
18879-99-7
化学式
C5H11NS2
mdl
MFCD19216879
分子量
149.281
InChiKey
IEQPZXXXPVAXRJ-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    2
  • 重原子数:
    8
  • 可旋转键数:
    3
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    0.8
  • 拓扑面积:
    45.1
  • 氢给体数:
    2
  • 氢受体数:
    2

安全信息

  • 海关编码:
    2930909090

SDS

SDS:8258222293d62d1c31ac05efd77f83a2
查看

反应信息

  • 作为反应物:
    描述:
    丁基二硫代氨基甲酸 在 1,2-dipyridinium ditribromide ethane 、 三乙胺 作用下, 以 乙腈 为溶剂, 以70%的产率得到丁基异硫氰酸酯
    参考文献:
    名称:
    使用无溴溴化试剂从二硫代氨基甲酸酯有效制备异硫氰酸酯
    摘要:
    首次确定了双溴化物试剂 1,1'-(乙烷-1,2-二基)二吡啶鎓双溴化物 (EDPBT) 的晶体结构。利用这种亲硫性无溴溴化剂 EDPBT,可以直接从二硫代氨基甲酸酯获得非常有用的合成中间体(异硫氰酸烷基酯和芳基酯)。EDP​​BT 可以很容易地用现成的试剂制备。它已被用作亲硫试剂,对于适合溴化的底物,其亲硫性优于其溴化能力。这是制备异硫氰酸酯的可持续过程,因为用过的试剂可以回收、再生和重复使用。
    DOI:
    10.1080/00397910903219476
  • 作为产物:
    描述:
    二硫化碳正丁胺碳酸氢钠 作用下, 以 乙酸乙酯 为溶剂, 反应 1.0h, 生成 丁基二硫代氨基甲酸
    参考文献:
    名称:
    脱硫介导的钴合成异硫氰酸酯
    摘要:
    摘要描述了在廉价、易得且空气稳定的钴催化剂存在下,从各自的胺中构建芳香族和脂肪族异硫氰酸酯的高效且简单的方案。所有反应均在优化的反应条件下进行,并在较短的反应时间内以良好至极好的收率得到目标产物。图形概要
    DOI:
    10.1080/00397911.2016.1224351
点击查看最新优质反应信息

文献信息

  • Synthesis of novel dithiocarbamates and xanthates using dialkyl azodicarboxylates: S N bond formation
    作者:Azim Ziyaei Halimehjani、Blanka Klepetářová、Petr Beier
    DOI:10.1016/j.tet.2018.02.049
    日期:2018.4
    characterized by a wide scope, high efficiency and straightforward isolation protocol. The synthetic utility of the dithiocarbamates and xanthates was demonstrated on the preparation of symmetrical and unsymmetrical thioureas, isothiocyanates, and thiocarbamates.
    通过在温和且无催化剂的条件下原位生成的二硫代氨基甲酸或黄原酸酯与偶氮二羧酸二烷基酯的反应,开发了一种用于合成一类新型二硫代氨基甲酸酯或黄原酸酯的单锅三组分途径。该反应的特点是范围广,效率高和直接的分离方案。在制备对称和不对称的硫脲,异硫氰酸酯和硫代氨基甲酸酯时,证明了二硫代氨基甲酸酯和黄原酸酯的合成效用。
  • Efficient One-pot Synthesis of Alkyl 3-(alkyl)-4-methyl-2-thioxo-2,3-dihydrothiazole-5-carboxylates in a Multi Component Reaction
    作者:Nasir Iravani、Jalal Albadi、Somaieh Varnaseri、Zahra Jaberi、Nahid Karami、Marzieh Khadamati
    DOI:10.1002/jccs.201200109
    日期:2012.12
    A simple and efficient one‐pot synthesis of alkyl 2‐(alkyl)‐4‐methyl‐2‐thioxo‐2,3‐dihydrothiazole‐5‐carboxylates from the reaction of primary alkylamines and carbon disulfide in the presence of 2‐chloro‐1,3‐dicarbonyl compounds is described. This new protocol has several advantages such as lack of necessity of the catalyst, good yields, mild conditions and short times for reaction.
    由伯烷基胺和二硫化碳在2-氯-存在下的反应简单,高效地一锅法合成2-(烷基)-4-甲基-2-硫代-2-2,3-二氢噻唑-5-羧酸烷基酯描述了1,3-二羰基化合物。该新方案具有许多优点,例如不需要催化剂,产率高,条件温和且反应时间短。
  • Alkali-metal-ion-doping strategy to improve the photovoltaic properties of Ag<sub>2</sub>BiI<sub>5</sub> solar cells
    作者:Yuxiang Wang、Yue Liu、Xinan Shi、Lijian Huang、Junye Tong、Gang Wang、Daocheng Pan
    DOI:10.1039/d1nj02627e
    日期:——
    of Ag2BiI5 thin films, leading to a porous absorber that reduces the device efficiency. The device performance of Li+-, Na+-, K+- and Rb+-doped Ag2BiI5 is significantly improved compared with that of pristine Ag2BiI5. It is found that the order of the power conversion efficiency promotion ability is K+ > Rb+ > Na+ > Li+ > Cs+ under the same experimental conditions. The present approach can be extended
    碱金属离子掺杂是提高薄膜太阳能电池器件性能的有效策略。尽管已经报道了在 Ag-Bi-I 太阳能电池中掺杂 Li +或 Cs +掺杂,但尚未系统研究掺杂其他碱金属离子对 Ag-Bi-I 太阳能电池的影响。在这项工作中,我们研究了五种碱金属离子(Li +、Na +、K +、Rb +和 Cs +)对 Ag 2 BiI 5吸收层的结构、形貌以及光学和电学性能的影响,以及以及它们对器件性能的影响。全碱金属掺杂的 Ag 2 BiI5薄膜显示出高结晶度并具有相似的合适带隙。霍尔效应测量表明,与原始的Ag 2 BiI 5薄膜相比,碱金属掺杂的Ag 2 BiI 5薄膜显示出改进的电性能,这有利于实现高效太阳能电池。出乎意料的是,Cs +掺杂可以显着增加 Ag 2 BiI 5薄膜的晶粒尺寸,导致多孔吸收体降低器件效率。Li + -、Na + -、K + - 和 Rb +掺杂的 Ag 2 BiI的器件性能5与原始
  • Synthesis of thioureido peptidomimetics employing alkyl azides and dithiocarbamates
    作者:L. Roopesh Kumar、Veladi Panduranga、T. M. Vishwanatha、Shekharappa Shekharappa、Vommina. V. Sureshbabu
    DOI:10.1039/c8ob00239h
    日期:——
    An unprecedented approach for the assembly of thioureido peptidomimetics is developed employing alkyl azides and dithiocarbamates. Dithiocarbamates react with alkyl azides with the liberation of N2 and elemental sulfur thereby leading to thiourea in a traceless manner. Thioureido peptidomimetics are thus furnished in good yields with no epimerization. This process is mild, free from the use of a base
    利用烷基叠氮化物和二硫代氨基甲酸酯开发了一种用于组装硫脲基拟肽的前所未有的方法。二硫代氨基甲酸酯与烷基叠氮化物反应,释放出N 2和元素硫,从而无痕地生成硫脲。硫脲基肽模拟物因此以高产率提供而没有差向异构化。这个过程是温和的,没有使用基础的,可扩展的和逐步的经济性。该方法的实用性已经通过N,N′-正交保护的硫脲基肽模拟物的合成得到强调。
  • Untersuchungen an 1,3-Thiazinen, VIII. Konkurrierende Bildung von Tetrahydro-1,3-thiazin-2-thionen und 2-Imino-1,3-dithianen
    作者:Wolfgang Hanefeld
    DOI:10.1002/ardp.19773100511
    日期:——
    Bei der Umsetzung der Dithiocarbamate 1 mit 1,3‐Dibrompropan in Gegenwart einer Base wurden die Verbindungen 3 und 4 erhalten und durch spektroskopische und chemische Methoden charakterisiert. Einige Verbindungen sind wirksam gegen Candida albicans.
    当二硫代氨基甲酸酯 1 在碱存在下与 1,3-二溴丙烷反应时,得到化合物 3 和 4,并通过光谱和化学方法进行表征。一些化合物对白色念珠菌有效。
查看更多