反-4-(二乙胺基)肉桂醛 | 22411-59-2

• 分子结构分类: 有机化合物 - 苯丙烷和聚酮 - 肉桂醛
• 中文名称: 反-4-(二乙胺基)肉桂醛
• 中文别名: 反式-4-(二乙基氨基)肉桂醛
• 英文名称: 4-(diethylamino)cinnamaldehyde
• 英文别名: trans-4-(diethylamino)cinnamaldehyde；(E)-3-(4-(diethylamino)phenyl)acrylaldehyde；p-diethylamino-cinnamaldehyde；(E)-3-[4-(diethylamino)phenyl]prop-2-enal
• CAS: 22411-59-2
• 化学式: C₁₃H₁₇NO
• 分子量: 203.284
• InChiKey: JXXOTBSUZDDHLT-AATRIKPKSA-N

物化性质

• 熔点：
  74-76℃
• 稳定性/保质期：
  在常温常压下稳定，应避免与强氧化剂和强碱接触。

计算性质

• 辛醇/水分配系数(LogP)：
  3.1
• 重原子数：
  15
• 可旋转键数：
  5
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.31
• 拓扑面积：
  20.3
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 危险品标志：
  Xi
• 海关编码：
  2922399090
• 安全说明：
  S26,S27,S36,S37,S39

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : trans-4-(Diethylamino)cinnamaldehyde
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 22411-59-2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Skin sensitisation (Category 1), H317
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi Irritant R36/37/38, R43
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust.
P280 Wear protective gloves.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C13H17NO
Molecular Weight : 203,28 g/mol
CAS-No. : 22411-59-2
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
trans-4-(Diethylamino)cinnamaldehyde
CAS-No. 22411-59-2 Skin Irrit. 2; Eye Irrit. 2; Skin <= 100 %
Sens. 1; STOT SE 3; H315,
H317, H319, H335
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
trans-4-(Diethylamino)cinnamaldehyde
CAS-No. 22411-59-2 Xi, R36/37/38 - R43 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 74 - 76 °C - lit.
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents, Strong bases
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
burning sensation, Cough, wheezing, laryngitis, Shortness of breath, Headache, Nausea, Vomiting, To the
best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly
investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  反-4-(二乙胺基)肉桂醛 在 sodium tetrahydroborate 、 溶剂黄146 、 sodium sulfate 作用下， 以 甲醇 、 二氯甲烷 为溶剂， 生成 (E)-tert-butyl 2-(3-(4-(diethylamino)phenyl)allylamino)ethylcarbamate
  参考文献：
  名称：

  Emission Wavelength Prediction of a Full-Color-Tunable Fluorescent Core Skeleton, 9-Aryl-1,2-dihydropyrrolo[3,4-b]indolizin-3-one

  摘要：

  In this paper we report on a novel fluorescent core skeleton, 9-aryl-1,2-dihydropyrrolo[3,4-b]indolizin-3-one, which we named Seoul-Fluor, having tunable and predictable photophysical properties. Using a concise and practical one-pot synthetic procedure, a 68-member library of new fluorescent compounds was synthesized with diverse substituents. In Seoul-Fluor, the electronic characteristics of the substituents, as well as their positional changes, have a close correlation with their photophysical properties. The systematic perturbation of electronic densities on the specific positions of Seoul-Fluor, guided with the Hammett constant, allows emission wavelength tunability covering the full color range. On the basis of these observations and a computational analysis, we extracted a simple first-order correlation of photophysical properties with the theoretical calculation and accurately predicted the emission wavelength of Seoul-Fluors through the rational design. In this study, we clearly demonstrate that Seoul-Fluor can provide a powerful gateway for the generation of desired fluorescent probes without the need for a tiresome synthesis and trial-and-error process.

  DOI：

  10.1021/ja110766a
• 作为产物：
  描述：

  N,N-二乙基-4-氨基苯甲醛 在 硫酸 、 ammonium acetate 、 二异丁基氢化铝 作用下， 以 吡啶 、 甲醇 、 水 、 甲苯 为溶剂， 反应 51.0h， 生成 反-4-(二乙胺基)肉桂醛
  参考文献：
  名称：

  Chao, Herbert S.-I., Synthetic Communications, 1988, vol. 18, # 14, p. 1641 - 1650

  摘要：

  DOI：

文献信息

• Iron(III)/O₂-Mediated Regioselective Oxidative Cleavage of 1-Arylbutadienes to Cinnamaldehydes
  作者：Amit Bhowmik、Rodney A. Fernandes

  DOI：10.1021/acs.orglett.9b03562

  日期：2019.11.15

  environmentally benevolent regioselective oxidative cleavage of 1-arylbutadienes to cinnamaldehydes mediated by iron(III) sulfate/O2 has been developed. The reaction offered good yields and excellent regioselectivity and showed good functional group tolerance (31 examples). The method is important, as few reports with limited substrate scope are available for such excellent oxidative cleavage of conjugated dienes

  已经开发了由硫酸铁（III）/ O 2介导的1-芳基丁二烯对肉桂醛的简单，有效和环境友好的区域选择性氧化裂解。该反应提供了良好的产率和优异的区域选择性，并显示出良好的官能团耐受性（31个实施例）。该方法很重要，因为很少有报道报道可对共轭二烯进行如此出色的氧化裂解的底物范围有限。
• <i>s</i>-Indacene-1,3,5,7(2<i>H</i>,6<i>H</i>)-tetraone (‘<i>Janus</i>dione’) and 1,3-Dioxo-5,6-indanedicarboxylic Acid: Old and New 1,3-Indandione Derivatives
  作者：James Y. Becker、Vladimir Khodorkovsky、Pnina Krief、Arkady Ellern、Ojars Neilands (the late)、Lev Shapiro

  DOI：10.1055/s-2004-831184

  日期：——

  Efficient syntheses, X-ray structures and spectroscopic properties of s-indacene-1,3,5,7(2H,6H)-tetraone (1) and 1,3-dioxo-5,6-indanedicarboxylic acid (2), their precursors and derivatives, are described for the first time.

  首次报道了s-二氢并五苯-1,3,5,7(2H,6H)-四酮（1）和1,3-二氧代-5,6-萘二甲酸（2）及其前体和衍生物的高效合成、X射线结构和光谱性质。
• SUBSTANCES FOR DYEING KERATINOUS FIBERS
  申请人：Gross Wibke

  公开号：US20100037909A1

  公开（公告）日：2010-02-18

  Disclosed are substances which contain unsaturated, non-aromatic dialdehydes of formula (Ia) and/or the tautomer (Ib) thereof, wherein R 1 , R 2 , and R 3 are defined as indicated in claim 1 , along with at least one CH-acidic compound of formulas (II) and/or (III), wherein R 6 , R 7 , R 8 , R 9 , R 10 , Y, X − , Het, and X 1 are defined as indicated in claim 1 , in a cosmetic carrier. Said substances color keratinous fibers, especially human hair, in an intensive, colorfast, natural brown shade.

  本发明涉及一种含有式(Ia)和/或其互变异构体(Ib)的不饱和非芳香二醛的物质，其中R1、R2和R3如权利要求1所示定义，以及至少一种式(II)和/或(III)的CH-酸性化合物，其中R6、R7、R8、R9、R10、Y、X−、Het和X1如权利要求1所示定义，在一种化妆品载体中。所述物质能够使角质纤维，尤其是人类头发，在一种浓郁、色牢、自然棕色的色调中着色。
• AGENT FOR DYEING KERATIN-CONTAINING FIBERS
  申请人：Gross Wibke

  公开号：US20100064450A1

  公开（公告）日：2010-03-18

  The invention relates to an agent for dying fibers comprising keratin, particularly human hair, the agent comprising at least one compound of the formula: together with at least one CH-acidic compound. The invention also relates to methods for shading oxidation dyed fibers, methods for freshening up fibers, methods for making an agent for dyeing fibers and to various compositions.

  该发明涉及一种用于染色纤维的药剂，包括角蛋白，特别是人类头发，该药剂包括至少一种具有以下结构的化合物：以及至少一种CH-酸性化合物。该发明还涉及用于给氧化染色纤维着色的方法，用于使纤维焕发的方法，用于制备染色纤维药剂的方法以及各种组合物。
• HAIR TREATMENT PRODUCTS COMPRISING POLYMERS
  申请人：Schulze zur Wiesche Erik

  公开号：US20090304620A1

  公开（公告）日：2009-12-10

  The invention relates to hair treatment products, comprising at least one copolymer made of 0.1 to 50% (in relation to the total number of monomers in the copolymer) monomers of the formula (I), wherein the unknowns are defined as in claim 1 , and A2) are monomers from the group of acrylic acid, methacrylic acid and the like, and—optionally non-ionic monomers from the group of acrylamide, vinyl alcohol, and the like, wherein the monomers A2 and A3 together represent 50 to 99.9% (in relation to the total number of monomers in the copolymer) of the copolymer, at least one silicon and at least one selected care product, wherein the products result in advantageous effects for skin and hair.

  该发明涉及头发护理产品，包括至少一种由0.1至50%（相对于共聚物中单体总数的比例）的公式（I）的单体制成的共聚物，其中未知数的定义如权利要求1中定义的，以及A2）是来自丙烯酸、甲基丙烯酸等单体组的单体，以及——可选的非离子单体，来自丙烯酰胺、乙烯醇等单体组，其中单体A2和A3共同代表共聚物中50至99.9%（相对于共聚物中单体总数的比例）的单体，至少含有一种硅和至少一种选定的护理产品，其中这些产品对皮肤和头发具有有利效果。

表征谱图