2,7-二氰基萘 | 39718-11-1

• 物质功能分类: 化学试剂 - 有机试剂 - 多环化合物
• 分子结构分类: 有机化合物 - 苯类化合物 - 萘
• 中文名称: 2,7-二氰基萘
• 英文名称: 2,7-naphthalenedicarbonitrile
• 英文别名: 2,7-naphthalenedinitrile；2,7-dicyanonaphthalene；naphthalene-2,7-dicarbonitrile；Naphthalin-2,7-dicarbonitril；2.7-Dicyan-naphthalin；2,7-Dicyannaphthalin
• CAS: 39718-11-1
• 化学式: C₁₂H₆N₂
• mdl: MFCD00159054
• 分子量: 178.193
• InChiKey: NNHXOKPHDUDDAK-UHFFFAOYSA-N

物化性质

• 熔点：
  267 °C
• 沸点：
  391.6±15.0 °C(Predicted)
• 密度：
  1.23±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  2.6
• 重原子数：
  14
• 可旋转键数：
  0
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.0
• 拓扑面积：
  47.6
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 危险等级：
  6.1

SDS

2,7-Dicyanonaphthalene
SAFETY DATA SHEET

---

Section 1. IDENTIFICATION
Product name: 2,7-Dicyanonaphthalene

---

Section 2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS Not classified
HEALTH HAZARDS
Acute toxicity (Oral) Category 3
Category 3
Acute toxicity (Dermal)
Acute toxicity (Inhalation) Category 3
Category 2
Skin corrosion/irritation
Serious eye damage/eye irritation Category 2A
Not classified
ENVIRONMENTAL HAZARDS
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal word Danger
Toxic if swallowed, in contact with skin or if inhaled
Hazard statements
Causes skin irritation
Causes serious eye irritation
Precautionary statements:
Avoid breathing dust/fume/gas/mist/vapours/spray.
[Prevention]
Use only outdoors or in a well-ventilated area.
Do not eat, drink or smoke when using this product.
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
[Response] IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for
breathing. Call a POISON CENTER or doctor/physician.
IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. Rinse
mouth.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Remove/Take off immediately all contaminated clothing.
Wash contaminated clothing before reuse.
Call a POISON CENTER or doctor/physician if you feel unwell.
2,7-Dicyanonaphthalene

---

Section 2. HAZARDS IDENTIFICATION
[Storage] Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
[Disposal] Dispose of contents/container through a waste management company authorized by
the local government.

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture: Substance
Components: 2,7-Dicyanonaphthalene
>94.0%(GC)
Percent:
CAS Number: 39718-11-1
2,7-Naphthalenedicarbonitrile
Synonyms:
Chemical Formula: C12H6N2

---

Section 4. FIRST AID MEASURES
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Call a POISON CENTER or doctor/physician.
Skin contact: Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
soap and water. Call a POISON CENTER or doctor/physician.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Immediately call a POISON CENTER or doctor/physician. Rinse mouth.
Ingestion:
Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

---

Section 5. FIRE-FIGHTING MEASURES
Dry chemical, foam, water spray, carbon dioxide.
Suitable extinguishing
media:
Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to
from the chemical: generate poisonous fume.
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
When extinguishing fire, be sure to wear personal protective equipment.
Special protective
equipment for firefighters:

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, Use extra personal protective equipment (P3 filter respirator for toxic particles). Keep
protective equipment and people away from and upwind of spill/leak. Entry to non-involved personnel should
emergency procedures: be controlled around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it.
containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with
up: appropriate laws and regulations.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures: Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent dispersion of dust. Wash hands and face thoroughly after handling.
Use a closed system if possible. Use a local exhaust if dust or aerosol will be
generated.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Storage conditions:
2,7-Dicyanonaphthalene

---

Section 7. HANDLING AND STORAGE
Store locked up.
Store away from incompatible materials such as oxidizing agents.
Packaging material: Comply with laws.

---

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Install a closed system or local exhaust. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Dust respirator, self-contained breathing apparatus(SCBA), supplied air respirator,
etc. Use respirators approved under appropriate government standards and follow
local and national regulations.
Hand protection: Impervious gloves.
Eye protection: Safety goggles. A face-shield, if the situation requires.
Skin and body protection: Impervious protective clothing. Protective boots, if the situation requires.

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C): Solid
Form: Crystal- Powder
Colour: Slightly pale yellow - Yellow
Odour: No data available
pH: No data available
Melting point/freezing point:267°C
Boiling point/range: No data available
Flash point: No data available
Flammability or explosive
limits:
No data available
Lower:
Upper: No data available
No data available
Relative density:
Solubility(ies):
[Water] No data available
[Other solvents] No data available

---

Section 10. STABILITY AND REACTIVITY
Stable under proper conditions.
Chemical stability:
Possibility of hazardous No special reactivity has been reported.
reactions:
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx)
products:

---

Section 11. TOXICOLOGICAL INFORMATION
Acute Toxicity: No data available
Skin corrosion/irritation: No data available
Serious eye No data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC = No data available
NTP = No data available
Reproductive toxicity: No data available

---

Section 12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: No data available
No data available
Crustacea:
Algae: No data available
2,7-Dicyanonaphthalene

---

Section 12. ECOLOGICAL INFORMATION
Persistence / degradability: No data available
Bioaccumulative No data available
potential(BCF):
Mobility in soil
Log Pow: No data available
No data available
Soil adsorption (Koc):
Henry's Law No data available
constant(PaM3/mol):

---

Section 13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system.
Observe all federal, state and local regulations when disposing of the substance.

---

Section 14. TRANSPORT INFORMATION
Hazards Class: 6.1: Toxic substance.
3439
UN-No:
Proper shipping name: Nitriles, solid, toxic, n.o.s.
III
Packing group:

---

Section 15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  2,7-二氰基萘 在 pentylalcoholic potash 作用下， 生成 2,7-萘二羧酸
  参考文献：
  名称：

  Ebert; Merz, Chemische Berichte, 1876, vol. 9, p. 611

  摘要：

  DOI：
• 作为产物：
  描述：

  2,7-萘二羧酸 在 四磷十氧化物 作用下， 反应 1.5h， 生成 2,7-二氰基萘
  参考文献：
  名称：

  腈及其相应胺的制造方法

  摘要：

  本发明涉及一种腈的制造方法，与现有技术相比，具有氨源用量显著降低、环境压力小、能耗低、生产成本低、腈产品的纯度和收率高等特点，并且能够获得结构更为复杂的腈。本发明还涉及由该腈制造相应胺的方法。

  公开号：

  CN105001032B

文献信息

• Synthesis of Multisubstituted Azatriphenylenes by Iridium-Catalyzed [2 + 2 + 2] Cycloaddition of Biaryl-Linked Diynes with Nitriles
  作者：Ryo Takeuchi、Shunsuke Fujisawa、Yuzo Yoshida、Jun Sagano、Toru Hashimoto、Asuka Matsunami

  DOI：10.1021/acs.joc.7b02784

  日期：2018.2.16

  A convenient synthesis of multisubstituted azatriphenylenes is reported. [Ir(cod)Cl]2/diphosphine is an efficient catalyst for the [2 + 2 + 2] cycloaddition of biaryl-linked diynes with nitriles to give multisubstituted azatriphenylenes in high yields. Aromatic, heteroaromatic, aliphatic, and functionalized nitriles could be used for the reaction.

  据报道，可以方便地合成多取代的氮杂三亚苯基。[Ir（cod）Cl] 2 /二膦是联芳基连接的二炔与腈的[2 + 2 + 2]环加成反应的高效催化剂，可高收率得到多取代的氮杂三苯并苯。芳族，杂芳族，脂族和官能化腈可用于反应。
• 腈及其相应胺的制造方法
  申请人：中国石化扬子石油化工有限公司

  公开号：CN105001032B

  公开（公告）日：2018-03-16

  本发明涉及一种腈的制造方法，与现有技术相比，具有氨源用量显著降低、环境压力小、能耗低、生产成本低、腈产品的纯度和收率高等特点，并且能够获得结构更为复杂的腈。本发明还涉及由该腈制造相应胺的方法。
• CHEMICAL MECHANICAL POLISHING AND WAFER CLEANING COMPOSITION COMPRISING AMIDOXIME COMPOUNDS AND ASSOCIATED METHOD FOR USE
  申请人：Lee Wai Mun

  公开号：US20090130849A1

  公开（公告）日：2009-05-21

  A composition and associated method for chemical mechanical planarization (or other polishing) is described. The composition contains an amidoxime compound and water. The composition may also contain an abrasive and a compound with oxidation and reduction potential. The composition is useful for attaining improved removal rates for metal, including copper, barrier material, and dielectric layer materials in metal CMP. The composition is particularly useful in conjunction with the associated method for metal CMP applications.

  本文描述了一种化学机械平整化（或其他抛光）的组合物及其相关方法。该组合物含有一种酰胺肟化合物和水。该组合物还可以含有磨料和具有氧化还原潜力的化合物。该组合物可用于在金属CMP中获得改进的金属去除速率，包括铜、屏障材料和金属CMP中的介电层材料。该组合物在金属CMP应用的相关方法中特别有用。
• METHODS OF CLEANING SEMICONDUCTOR DEVICES AT THE BACK END OF LINE USING AMIDOXIME COMOSITIONS
  申请人：Lee Wai Mun

  公开号：US20100043823A1

  公开（公告）日：2010-02-25

  The present invention relates to aqueous compositions comprising amidoxime compounds and methods for cleaning plasma etch residue from semiconductor substrates including such dilute aqueous solutions. The compositions of the invention may optionally contain one or more other acid compounds, one or more basic compounds, and a fluoride-containing compound and additional components such as organic solvents, chelating agents, amines, and surfactants. The invention also relates to a method of removing residue from a substrate during integrated circuit fabrication.

  本发明涉及含有酰胺肟化合物的水性组合物及其清洗半导体衬底上等离子体刻蚀残留物的方法，包括这种稀释的水性溶液。本发明的组合物可以选择性地含有一种或多种其他酸性化合物、一种或多种碱性化合物、含氟化合物和其他成分，如有机溶剂、螯合剂、胺和表面活性剂。本发明还涉及一种在集成电路制造过程中从衬底上去除残留物的方法。
• COMPOSITION COMPRISING CHELATING AGENTS CONTAINING AMIDOXIME COMPOUNDS
  申请人：Lee Wai Mun

  公开号：US20100105595A1

  公开（公告）日：2010-04-29

  The present invention is a novel aqueous cleaning solution for use in semiconductor front end of the line (FEOL) manufacturing process wherein the cleaning solution comprises at least one amidoxime compound.

  本发明是一种用于半导体前端制造过程中的新型水性清洗溶液，其中清洗溶液包含至少一种酰胺肟化合物。