3,3'-羰基双(7-二乙胺香豆素) | 63226-13-1

• 分子结构分类: 有机化合物 - 苯丙烷和聚酮 - 香豆素及其衍生物
• 中文名称: 3,3'-羰基双(7-二乙胺香豆素)
• 中文别名: 3,3’-羰基双(7-二乙胺香豆素)；3,3"-羰基双(7-二乙胺香豆素)
• 英文名称: 3,3'-carbonylbis(7-diethylaminocoumarin)
• 英文别名: 3,3'-carbonylbis(7-(diethylamino)-2H-chromen-2-one)；7-(diethylamino)-3-[7-(diethylamino)-2-oxochromene-3-carbonyl]chromen-2-one
• CAS: 63226-13-1
• 化学式: C₂₇H₂₈N₂O₅
• 分子量: 460.53
• InChiKey: SANIRTQDABNCHF-UHFFFAOYSA-N

物化性质

• 熔点：
  214 °C
• 沸点：
  565.35°C (rough estimate)
• 密度：
  1.2310 (rough estimate)
• 最大波长(λmax)：
  456nm(EtOH)(lit.)
• 稳定性/保质期：
  遵照规定使用和储存，则不会分解。

计算性质

• 辛醇/水分配系数(LogP)：
  5.4
• 重原子数：
  34
• 可旋转键数：
  8
• 环数：
  4.0
• sp3杂化的碳原子比例：
  0.3
• 拓扑面积：
  76.2
• 氢给体数：
  0
• 氢受体数：
  7

安全信息

• 海关编码：
  2932209090
• 危险性防范说明：
  P264,P280,P302+P352,P337+P313,P305+P351+P338,P362+P364,P332+P313
• 危险性描述：
  H315,H319

SDS

Name:	3 3 -Carbonylbis(7-Diethylaminocoumarin) 99% (UV-Vis) Material Safety Data Sheet
Synonym:	2H-1-Benzopyran-2-One,3,3'-Carbonylbis7-(Diethylamino)-
CAS:	63226-13-1

Section 1 - Chemical Product MSDS Name:3 3 -Carbonylbis(7-Diethylaminocoumarin) 99% (UV-Vis) Material Safety Data Sheet
Synonym:2H-1-Benzopyran-2-One,3,3'-Carbonylbis7-(Diethylamino)-

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
63226-13-1	2H-1-Benzopyran-2-One,3,3'-Carbonylbis	99	unlisted

Hazard Symbols: None Listed.
Risk Phrases: None Listed.

---

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation.
Skin:
May cause skin irritation.
Ingestion:
May cause irritation of the digestive tract. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated.
Chronic:
No information found.

---

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid.
Notes to Physician:

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Extinguishing Media:
Use agent most appropriate to extinguish fire. Use water spray, dry chemical, carbon dioxide, or appropriate foam.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions.
Provide ventilation.

---

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 63226-13-1: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: yellow orange
Odor: none reported
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 214 deg C
Autoignition Temperature: Not applicable.
Flash Point: Not applicable.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C27H28N2O5
Molecular Weight: 460.52

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, dust generation, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents.
Hazardous Decomposition Products:
Nitrogen oxides, carbon monoxide, irritating and toxic fumes and gases, carbon dioxide.
Hazardous Polymerization: Has not been reported

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 63226-13-1 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
2H-1-Benzopyran-2-One,3,3'-Carbonylbis7-(Diethylamino)- - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
S 28A After contact with skin, wash immediately with
plenty of water.
S 37 Wear suitable gloves.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 63226-13-1: No information available.
Canada
CAS# 63226-13-1 is listed on Canada's NDSL List.
CAS# 63226-13-1 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 63226-13-1 is listed on the TSCA inventory.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为产物：
  描述：

  1,3-丙酮二羧酸二甲酯 、 4-(二乙氨基)水杨醛 在 哌啶 作用下， 生成 3,3'-羰基双(7-二乙胺香豆素)
  参考文献：
  名称：

  酮香豆素：新型三重态敏化剂

  摘要：

  制备了3-酮香豆素的几种衍生物，并显示它们具有有效三重态敏化剂所需的许多光物理标准。这些化合物包括3-芳酰基香豆素（1）和3，3'-羰基双香豆素（2）。1中的芳基是苯基和取代的苯基衍生物或杂环基，例如噻吩基和苯并呋喃基。1和2中香豆素部分上的取代基（如果有）是烷氧基或二烷基氨基。这些化合物的最大吸收在330至450 nm之间，消光系数在10 4至几乎10 5的范围内。，这是对光敏抗蚀剂和光刻中使用的聚合物薄膜进行有效敏化的重要标准。几个导数的单重态-三重态系统间穿越（isc）效率接近统一。但是，在其他情况下，无辐射衰变过程则与isc竞争。衰减过程是在的不对称取代的衍生物特别优势2，但似乎在聚合物基质可以显着抑制。这些化合物的三线态能量的范围从CA。48至60 kcal / mol。这些酮香豆素中的一些显示出磷光光谱，表明存在“冷冻”旋转异构体。

  DOI：

  10.1016/0040-4020(82)85104-1

文献信息

• SILANE COUPLING COMPOUNDS AND MEDICAL AND/OR DENTAL CURABLE COMPOSITIONS COMPRISING THE SAME
  申请人：KABUSHIKI KAISHA SHOFU

  公开号：US20190300552A1

  公开（公告）日：2019-10-03

  The present invention relate to a novel silane coupling agent and a medical and/or dental curable composition comprising the same. It is an object of the present invention to provide a novel silane coupling agent that imparts high affinity to a radical polymerizable monomer, thereby imparting high mechanical strength, flexibility and durability when used for a medical and/or dental curable composition, and an inorganic filler surface-treated with the novel silane coupling agent and a novel medical and/or dental curable composition. A silane coupling agent including repeating units such as a urethane bond and polyethylene glycol (ether bond) at a specific position is used.

  本发明涉及一种新型硅烷偶联剂以及包括该偶联剂的医用和/或牙科可固化组合物。本发明的目的是提供一种新型硅烷偶联剂，使其对自由基聚合单体具有高亲和力，从而在用于医用和/或牙科可固化组合物时赋予高机械强度、柔韧性和耐久性，并且包括经新型硅烷偶联剂表面处理的无机填料和新型医用和/或牙科可固化组合物。该硅烷偶联剂包括在特定位置具有尿素键和聚乙二醇（醚键）等重复单元。
• [EN] OXIME ESTER PHOTOINITIATORS<br/>[FR] PHOTO-INITIATEURS À BASE D'ESTER D'OXIME
  申请人：BASF SE

  公开号：WO2021175855A1

  公开（公告）日：2021-09-10

  Disclosed are α-oxo oxime ester compounds based on carbazole derivatives which have specific substituent groups useful as a photoinitiator, as well as photopolymerizable compositions comprising said photoinitiator and ethylenically unsaturated compounds. The photopolymerizable compositions are useful, for example, in photoresist formulations for display applications, e.g. liquid crystal display (LCD), organic light emitting diode (OLED) and touch panel.

  揭示了基于咔唑衍生物的α-氧代肟酯化合物，其具有特定取代基，可用作光引发剂，以及包括所述光引发剂和乙烯不饱和化合物的光聚合组合物。这些光聚合组合物可用于例如显示应用的光阻配方，例如液晶显示器（LCD）、有机发光二极管（OLED）和触摸面板。
• OXIME ESTER PHOTOINITIATORS
  申请人：BASF SE

  公开号：US20180208583A1

  公开（公告）日：2018-07-26

  Compounds of the formulae (I) or (II) wherein X is A is O, S, NR 5 or CR 16 R 17 ; R 1 is for example hydrogen or C 1 -C 20 alkyl R 2 is for example hydrogen, C 1 -C 20 alkyl or C 6 -C 20 aryl R 5 for example is C 1 -C 20 alkyl; R 7 , R 8 , R 9 , R 10 and R 11 for example independently of each other are hydrogen. C 1 -C 20 alkyl, halogen, CN or NO 2 ; Ar 1 is for example unsubstituted or substituted C 6 -C 20 aryl, C 3 -C 20 heteroaryl, C 6 -C 20 aroyl, C 3 -C 20 heteroarylcarbonyl or or Ar 1 is Ar 2 is for example phenylene, all of which are unsubstituted or substituted M is for example unsubstituted or substituted C 1 -C 20 alkylene Y is a direct bond, O, S, NR 5 or CO; Z 1 is for example O or S; Z 2 is a direct bond, O, S or NR 5 ; and Q is CO or a direct bond.

  公式(I)或(II)的化合物 其中 X是 A是O, S, NR 5 或CR 16 R 17 ; R 1 例如是氢或C 1 -C 20 烷基 R 2 例如是氢, C 1 -C 20 烷基或C 6 -C 20 芳基 R 5 例如是C 1 -C 20 烷基; R 7 , R 8 , R 9 , R 10 和R 11 例如彼此独立是氢. C 1 -C 20 烷基, 卤素, CN或NO 2 ; Ar 1 例如是不取代或取代的C 6 -C 20 芳基, C 3 -C 20 杂芳基, C 6 -C 20 芳酰基, C 3 -C 20 杂芳基甲酰基或 或Ar 1 是 Ar 2 例如是苯基, 所有这些都不取代或取代 M例如是不取代或取代的C 1 -C 20 亚烷基 Y是直接键, O, S, NR 5 或CO; Z 1 例如是O或S; Z 2 是直接键, O, S或NR 5 ; 和 Q是CO或直接键。
• [EN] OXIME ESTER PHOTOINITIATORS<br/>[FR] PHOTOAMORCEURS À BASE D'ESTER D'OXIME
  申请人：BASF SE

  公开号：WO2015036910A1

  公开（公告）日：2015-03-19

  Disclosed are oxime ester compounds which have specific benzo (unsaturated 5-membered ring)-carbonyl group and their use as photoinitiators in photopolymerizable compositions, in particular in photoresist formulations for display applications, e.g. liquid crystal display (LCD), organic light emitting diode (OLED) and touch panel.

  披露的是具有特定苯并（不饱和五元环）-羰基基团的肟酯化合物及其作为光聚合组合物中的光引发剂的使用，特别是在显示应用的抗蚀剂配方中，例如液晶显示（LCD）、有机发光二极管（OLED）和触摸面板。
• [EN] POLYMERIZABLE COMPOSITION COMPRISING AN OXIME SULFONATE AS THERMAL CURING AGENT<br/>[FR] COMPOSITION POLYMÉRISABLE COMPRENANT UN SULFONATE D'OXIME EN TANT QU'AGENT DE DURCISSEMENT THERMIQUE
  申请人：BASF SE

  公开号：WO2012101245A1

  公开（公告）日：2012-08-02

  The present invention relates to a polymerizable composition comprising at least one ethylenically unsaturated, polymerizable compound and at least one oxime sulfonate compound of the formula (I) QAaBbCc where a is 0, 1, 2, 3, 4 or 6, b is 0, 1, 2, 3, 4 or 6, and c is 0, 1, 2, 3, 4 or 6, where the sum of a + b + c is 1, 2, 3, 4 or 6 where (A) is a group (B) is a group (C) is a group where # denotes the point of attachment to Q; X is S or NR14 and Q, R1, R2, R3 and R14 are as defined in claim 1 and in the description. The present invention also relates to the use of the this composition, to novel oxime sulfonates and the use of the oxime sulfonates as thermal curing promoter.

  本发明涉及一种可聚合的组成，包括至少一种乙炔基不饱和的可聚合化合物和至少一种具有公式（I）QAaBbCc的亚硝基亚磺酸酯化合物，其中a为0、1、2、3、4或6，b为0、1、2、3、4或6，c为0、1、2、3、4或6，其中a+b+c的总和为1、2、3、4或6，其中（A）是一个基团，（B）是一个基团，（C）是一个基团，其中#表示与Q连接的点；X是S或NR14，Q、R1、R2、R3和R14如权利要求1和说明书中所定义。本发明还涉及使用这种组成物，新型亚硝基亚磺酸酯及其作为热固化促进剂的应用。