摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

bis(4-pyridylthio)methane | 91091-06-4

中文名称
——
中文别名
——
英文名称
bis(4-pyridylthio)methane
英文别名
4-(Pyridin-4-ylsulfanylmethylsulfanyl)pyridine;4-(pyridin-4-ylsulfanylmethylsulfanyl)pyridine
bis(4-pyridylthio)methane化学式
CAS
91091-06-4
化学式
C11H10N2S2
mdl
——
分子量
234.346
InChiKey
VEWYZCLIKFRHJW-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 熔点:
    146.5-147.5 °C
  • 沸点:
    411.7±25.0 °C(Predicted)
  • 密度:
    1.29±0.1 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    2.6
  • 重原子数:
    15
  • 可旋转键数:
    4
  • 环数:
    2.0
  • sp3杂化的碳原子比例:
    0.09
  • 拓扑面积:
    76.4
  • 氢给体数:
    0
  • 氢受体数:
    4

反应信息

  • 作为反应物:
    描述:
    bis(4-pyridylthio)methanecopper(ll) bromide乙醇 为溶剂, 以85%的产率得到[CuBr2(bis(4-pyridylthio)methane)2]
    参考文献:
    名称:
    双(4-吡啶硫基)甲烷与氯化铜和溴化铜(II)相互作用的研究
    摘要:
    新配体双(4-吡啶硫基)甲烷(4-bpytm)(1)及其配合物[CuX2(4-bpytm)]和[CuX2(4-bpytm)2](X = Cl和Br)(2 - 5 ) 已通过元素分析、IR-Raman、UV/Vis 光谱制备和表征。(4-bpytm) (1)、[CuCl2 (4-bpytm) 2] (3) 和[CuBr2 (4-bpytm) 2] (4) 的结构通过单晶X 射线衍射分析确定。1:2 衍生物的 X 射线分析表明,铜原子具有扭曲的 (4 + 2) 八面体环境。铜原子由来自四个桥连 4-bpytm 配体的四个氮原子和两个卤素原子配位。由于 JahnTeller 畸变,轴向 Cu-N 键比赤道 Cu-N 键长得多。CuX2 单元通过桥接 4-bpytm 配体相互连接,形成 2D 互穿配位聚合物。
    DOI:
    10.1002/zaac.200570051
  • 作为产物:
    参考文献:
    名称:
    有机硫化物对温室红蜘蛛螨卵和幼虫的毒性。I.-SS'-二取代烷烃-αω-二硫醇
    摘要:
    描述了一种实验室测试方法,用于评估化学品对温室红蜘蛛(Tetranychus telarius L.)的卵和幼螨的活性。使用该测试方法由一系列 SS'-二取代烷烃-αω-二硫醇给出的结果列表和讨论。
    DOI:
    10.1002/jsfa.2740080106
点击查看最新优质反应信息

文献信息

  • External anion effect on the synthesis of new MOFs based on formate and a twisted divergent ligands
    作者:Ana Belén Lago、Rosa Carballo、Luis Lezama、Ezequiel M. Vázquez-López
    DOI:10.1016/j.jssc.2015.08.022
    日期:2015.11
    New copper(II) metal–organic compounds with the formulae [Cu3Cl(HCO2)5(SCS)3(H2O)2]·8H2O·EtOH (1) and [Cu3(HCO2)4(SCS)4(H2O)2](NO3)2·9H2O (2) (SCS=bis(4-pyridylthio)methane) have been synthesized after a careful study of the reaction of the SCS ligand with copper(II) formate. The compounds were obtained in the presence of sodium chloride and nitrate salts under microwave irradiation. The influence
    分子式为[Cu 3 Cl(HCO 2)5(SCS)3(H 2 O)2 ]·8H 2 O·EtOH(1)和[Cu 3(HCO 2)4的新型铜(II)金属有机化合物(SCS)4(H 2 O)2 ](NO 3)2 ·9H 2 O(2)(SCS =双(4-吡啶硫基)甲烷)是在仔细研究了SCS配体与甲酸铜(II)的反应后合成的。该化合物是在微波辐射下在氯化钠和硝酸盐存在下获得的。研究了不同金属/阴离子比例下阴离子对最终结构的影响。新型氯化物-MOF 1的特征在于电子顺磁共振(EPR),磁性能和单晶X射线衍射研究。还研究了热稳定性和拓扑分析。
  • Control over the preparation of two pH-dependent Cu(ii) supramolecular isomers based on 1,3,5-benzenetricarboxylic acid and the bis(4-pyridylthio)methane ligand
    作者:Ana Belén Lago、Rosa Carballo、Sabina Rodríguez-Hermida、Ezequiel M. Vázquez-López
    DOI:10.1039/c2ce26652k
    日期:——
    The possibility of controlling the formation of copper(II) coordination polymers based on the rigid carboxylate ligand 1,3,5-benzenetricarboxylic acid (H3btc) and an N,N-divergent spacer with conformational flexibility, bis(4-pyridylthio)methane (SCS), was investigated. The new coordination polymers 1∞[Cu(H2btc)2(SCS)] (1) and 2∞[Cu(Hbtc)(SCS)2]·H2O (2) have been prepared and characterized. Compounds
    基于刚性羧酸盐配体控制铜(II)配位聚合物形成的可能性1,3,5-苯三羧酸(H 3 btc)和具有构象柔韧性的N,N-发散间隔基,双(4-吡啶硫基)甲烷(SCS),进行了调查。新的配位聚合物1 ∞ [铜(H 2 BTC)2(SCS)](1)和2 ∞ [铜(HBTC)(SCS)2 ]·H 2 O(2)已经被制备和表征。获得化合物1和2的混合物,合成条件的优化使高纯度的纯相分离成为可能。拓扑分析表明三个网络的相互渗透在一个VCM型拓扑2。还研究了这些系统的热稳定性和结构动力学。
  • Role of inorganic and organic anions in the formation of metallosupramolecular assemblies of silver(I) coordination polymers with the twisted ligand bis(4-pyridylthio)methane
    作者:Rosa Carballo、Berta Covelo、Emilia García-Martínez、Ana Belén Lago、Ezequiel M. Vázquez-López
    DOI:10.1016/j.poly.2009.01.020
    日期:2009.4
    dithioether ligand bis(4-pyridylthio)methane (4bpytm) with silver(I) salts afforded four complexes with 1:1 stoichiometries, namely [Ag(4bpytm)](NO3) (1), [Ag(4bpytm)](ClO4) (2) and [Ag(4bpytm)](ClO4) ½CH2Cl2 ½dmf (2·Solv), [Ag(CH3COO)(4bpytm)]·H2O (3) and [Ag(CF3COO)(4bpytm)] (4). X-ray structural analysis of these complexes showed that one-dimensional structures are obtained for 1, 2·Solv and 4 whereas
    扭曲的吡啶基二硫醚配体双(4-吡啶硫基)甲烷(4bpytm)与银(I)盐的反应提供了化学计量比为1:1的四种配合物,即[Ag(4bpytm)](NO 3)(1),[Ag( 4bpytm)](CLO 4)(2)和[Ag(上4bpytm)](CLO 4)½CH 2氯2 ½dmf(2 · SOLV)和[Ag(CH 3 COO)(4bpytm)]·H 2 O(3)和[Ag(CF 3 COO)(4bpytm)](4)。这些复合物的X-射线结构分析显示,获得一维结构1,2 ·Solv和4,而在3中形成一个二维网络。配体4bpytm在所有情况下均作为N,N′-双(单齿)桥连系统,除了在3中,其中利用其两个吡啶氮原子和硫原子以三齿方式起作用的配体获得了空前的配位模式。配位聚合物是通过辅助触头组装:银...银在4,银... S IN 1,2 · SOLV和4,银...○在2 · SOLV和结晶水之间的氢键相
  • Anion effect on the construction of copper(II) coordination polymers with the twisted ligand bis(4-pyridylthio)methane
    作者:Rosa Carballo、Berta Covelo、Nuria Fernández-Hermida、Emilia García-Martínez、Ana Belén Lago、Ezequiel M. Vázquez-López
    DOI:10.1016/j.poly.2008.07.014
    日期:2008.10
    · H 2 O with 4-bpytm [4-bpytm = bis(4-pyridylthio)methane] in EtOH afforded the complex [Cu(SO 4 )(4-bpytm)(H 2 O) 3 ] · H 2 O ( 1 · H 2 O ) while the reaction of 4-bpytm with Cu(NO 3 ) 2 · 3H 2 O in EtOH afforded the complex [Cu(NO 3 ) 2 (4-bpytm) 2 ] · H 2 O ( 2 · H 2 O). The reaction of 4-bpytm with Cu(NO 3 ) 2 · 3H 2 O in EtOH/dmf under microwave irradiation afforded the pseudo-polymorph [Cu(NO
    摘要CuSO 4·H 2 O与4-bpytm [4-bpytm =双(4-吡啶硫基)甲烷]在乙醇中反应,得到配合物[Cu(SO 4)(4-bpytm)(H 2 O)3] ·H 2 O(1·H 2 O),而4-bpytm与Cu(NO 3)2·3H 2 O在EtOH中的反应生成了配合物[Cu(NO 3)2(4-bpytm)2]·H 2 O(2·H 2 O)。4-bpytm与Cu(NO 3)2·3H 2 O在EtOH / dmf中在微波辐射下的反应得到假多晶型[Cu(NO 3)2(4-bpytm)2]·Solv(2·Solv) 。化合物1·H 2 O形成螺旋链,而化合物2·H 2 O和2·Solv是2D配位聚合物,基于2·H 2 O中的菱形网格和2·H2O中的拼花图案具有(4,4)拓扑结构求解。通过氢键对3种化合物的3D超分子组织进行了分析,并研究了它们的热行为。
  • Polymorphism in a two-dimensional copper(<scp>i</scp>) metal–organic framework with the ligand bis(4-pyridylthio)methane
    作者:Olaya Gómez-Paz、Rosa Carballo、Ana B. Lago、Ezequiel M. Vázquez-López
    DOI:10.1039/d1ce00461a
    日期:——
    Polymorphism is a common phenomenon in crystalline materials but it has barely been studied in the field of metal organic frameworks. The study of polymorphism is useful to investigate structure–property relationships and control over the synthesis of particular polymorphs could be an effective way to fine-tune the physical properties of materials. We report here the preparation and characterization
    多晶现象是晶体材料中的普遍现象,但在金属有机骨架领域却鲜有研究。多晶型研究有助于研究结构-性能关系,控制特定多晶型物的合成可能是微调材料物理性能的有效方法。我们在此报告了铜 ( I ) 配位聚合物2 ∞ CuCl(4bpytm), 4bpytm = 双 (4-吡啶硫基) 甲烷的三种多晶型物的制备和表征。研究了这些化合物的结构和热特性,以详细了解三种多晶型物之间的差异。
查看更多