四氢噻喃-4-酮肟 | 6309-59-7

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 噻烷
• 中文名称: 四氢噻喃-4-酮肟
• 英文名称: tetrahydro-4H-thiopyran-4-one oxime
• 英文别名: dihydro-2H-thiopyran-4(3H)-one oxime；Tetrahydrothiopyran-4-one oxime；N-(thian-4-ylidene)hydroxylamine
• CAS: 6309-59-7
• 化学式: C₅H₉NOS
• mdl: MFCD00102049
• 分子量: 131.199
• InChiKey: XWSBAVVPGULZOY-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  0.6
• 重原子数：
  8
• 可旋转键数：
  0
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.8
• 拓扑面积：
  57.9
• 氢给体数：
  1
• 氢受体数：
  3

安全信息

• 海关编码：
  2934999090
• 包装等级：
  III
• 危险类别：
  4.1
• 危险性防范说明：
  P280,P210,P240,P264,P270,P301+P310,P330,P370+P378,P403+P233,P405,P501
• 危险品运输编号：
  1325
• 危险性描述：
  H228,H302,H317,H319,H341,H351

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : Tetrahydrothiopyran-4-One Oxime
: SYX00364
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 131,2 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
No special environmental precautions required.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
No special environmental precautions required.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  四氢噻喃-4-酮肟 在 lithium aluminium tetrahydride 作用下， 以 四氢呋喃 为溶剂， 生成 四氢噻喃-4-胺
  参考文献：
  名称：

  [EN] NOVEL COMPOUNDS
  [FR] NOUVEAUX COMPOSÉS

  摘要：

  这项发明涉及某些新颖化合物。具体而言，该发明涉及符合式(I)及其盐的化合物。该发明的化合物是激酶活性抑制剂，特别是IKK2活性的抑制剂。

  公开号：

  WO2009112473A1
• 作为产物：
  描述：

  四氢噻喃-4-酮 在 盐酸羟胺 、 碳酸氢钠 作用下， 以 乙醇 为溶剂， 生成 四氢噻喃-4-酮肟
  参考文献：
  名称：

  评估基于氨基酸和羟基酸侧链插入的连续环扩展的可行性。

  摘要：

  基于氨基/羟基酸侧链插入的扩环反应的结果很大程度上取决于环的大小。这份手稿建立在我们之前关于连续环扩展 (SuRE) 方法的工作的基础上，详细介绍了为更好地定义内酰胺和 β-酮酯环系统上这些反应在环大小和附加功能方面的范围和局限性所做的努力。合成结果为哪些底物类别更有可能成功提供了明确的指导，并得到了使用密度泛函理论 (DFT) 方法的计算结果的支持。计算扩环过程中可逆形成的三种异构体的相对吉布斯自由能，使得在大多数情况下能够正确预测新合成反应的可行性。新的合成和计算结果预计将支持新的基于内酰胺和β-酮酯的扩环反应的设计。

  DOI：

  10.1002/chem.202002164

文献信息

• [EN] 1-(DIHYDRONAPHTHALENYL)PYRIDONES AS MELANIN-CONCENTRATING HORMONE RECEPTOR 1 ANTAGONISTS<br/>[FR] 1-(DIHYDRONAPHTALÉNYL)PYRIDONES EN TANT QU'ANTAGONISTES DU RÉCEPTEUR 1 DE L'HORMONE DE CONCENTRATION DE LA MÉLANINE
  申请人：GLAXOSMITHKLINE LLC

  公开号：WO2013149362A1

  公开（公告）日：2013-10-10

  Provided are 1-(dihydronaphthalenyl)pyridones which are antagonists at the melanin-concentrating hormone receptor 1 (MCHR1), pharmaceutical compositions containing them, processes for their preparation, and their use in therapy for the treatment of obesity and diabetes.

  提供的是1-(二氢萘基)吡啶酮，它们是黑素浓集激素受体1（MCHR1）的拮抗剂，包含它们的药物组合物，它们的制备过程，以及它们在治疗肥胖和糖尿病方面的用途。
• AZEPANE DERIVATIVES AND METHODS OF TREATING HEPATITIS B INFECTIONS
  申请人：Novira Therapeutics, Inc.

  公开号：US20150197493A1

  公开（公告）日：2015-07-16

  Provided herein are compounds useful for the treatment of HBV infection in a subject in need thereof, pharmaceutical compositions thereof, and methods of inhibiting, suppressing, or preventing HBV infection in the subject.

  本文提供了一些用于治疗HBV感染的化合物，以及其药物组合物和抑制、抑制或预防受试者HBV感染的方法。
• Kinase inhibitor compounds
  申请人：Liang Congxin

  公开号：US20090076005A1

  公开（公告）日：2009-03-19

  The invention relates to compounds, compositions comprising the compounds, and methods of using the compounds and compound compositions. The compounds, compositions, and methods described herein can be used for the therapeutic modulation of kinase-mediated processes, and treatment of disease and disease symptoms, particularly those mediated by certain kinase enzymes.

  这项发明涉及化合物、包含这些化合物的组合物，以及使用这些化合物和化合物组合物的方法。本文描述的化合物、组合物和方法可用于治疗激酶介导的过程，并治疗疾病和疾病症状，特别是那些由特定激酶酶介导的症状。
• AZOLE COMPOUNDS
  申请人：Takeda Chemical Industries, Ltd.

  公开号：EP1486490A1

  公开（公告）日：2004-12-15

  The present invention provides a compound represented by the formula (I) wherein R1 is a hydrogen atom, a halogen atom, an optionally substituted hydrocarbon group, an optionally substituted heterocyclic group, an optionally substituted hydroxy group, an optionally substituted thiol group or an optionally substituted amino group, A is an optionally substituted cyclic amino group or -NR2-W-D wherein R2 is a hydrogen atom or an alkyl group, W is a bond or a divalent acyclic hydrocarbon group, and D is an optionally substituted cyclic group, an optionally substituted amino group or an optionally substituted acyl group, B is an optionally substituted hydrocarbon group or an optionally substituted heterocyclic group, X is an oxygen atom, a sulfur atom or an optionally substituted nitrogen atom, and Y is a bond or a divalent acyclic hydrocarbon group, or a salt thereof, which is useful for the prophylaxis or treatment of diabetic neuropathy and the like.

  本发明提供了一种由以下式（I）表示的化合物， 其中R1是氢原子、卤原子、可选择取代的碳氢基团、可选择取代的杂环基团、可选择取代的羟基、可选择取代的硫醇基团或可选择取代的氨基， A是可选择取代的环氨基团或-NR2-W-D，其中R2是氢原子或烷基，W是键或二价的非环烃基团，D是可选择取代的环基团、可选择取代的氨基团或可选择取代的酰基团， B是可选择取代的碳氢基团或可选择取代的杂环基团， X是氧原子、硫原子或可选择取代的氮原子，以及 Y是键或二价的非环烃基团，或其盐，用于预防或治疗糖尿病性神经病变等。
• Copper-Catalyzed β-Lactam Formation Initiated by 1,3-Azaprotio Transfer of Oximes and Methyl Propiolate
  作者：Zhenjie Qi、Shaozhong Wang

  DOI：10.1021/acs.orglett.1c01937

  日期：2021.8.6

  A copper(II)-catalyzed protocol to construct trans-configured β-lactams and spirocyclic β-lactams from oximes and methyl propiolate has been developed, which features excellent substrate flexibility and diastereoselectivity (up to >99:1 dr). In situ FT-IR mechanistic experiments support that ketene species might be involved in the formation of β-lactams.

  已经开发了一种铜 (II) 催化的协议，用于从肟和丙炔酸甲酯构建反式配置的β-内酰胺和螺环 β-内酰胺，其具有出色的底物灵活性和非对映选择性（高达 >99:1 dr）。原位 FT-IR 机械实验支持乙烯酮物质可能参与 β-内酰胺的形成。