2-氨基-5-甲基噻吩-3-羧酸甲酯 | 19369-53-0

• 物质功能分类: 医药中间体 - 杂环化合物 - 噻吩类化合物
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 噻吩类
• 中文名称: 2-氨基-5-甲基噻吩-3-羧酸甲酯
• 英文名称: methyl 2-amino-5-methylthiophene-3-carboxylate
• 英文别名: 2-amino-5-methyl-thiophene-3-carboxylic acid methyl ester
• CAS: 19369-53-0
• 化学式: C₇H₉NO₂S
• mdl: MFCD01922101
• 分子量: 171.22
• InChiKey: GHPDMFBHITXJAZ-UHFFFAOYSA-N

物化性质

• 沸点：
  278.2±35.0 °C(Predicted)
• 密度：
  1.264±0.06 g/cm3(Predicted)
• 溶解度：
  溶于DMSO、甲醇

计算性质

• 辛醇/水分配系数(LogP)：
  2.1
• 重原子数：
  11
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.285
• 拓扑面积：
  80.6
• 氢给体数：
  1
• 氢受体数：
  4

安全信息

• 危险等级：
  IRRITANT
• 海关编码：
  2934999090
• 危险性防范说明：
  P261,P280,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H332,H335
• 储存条件：
  应存放在室温、干燥且密封的环境中。

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : Methyl 2-Amino-5-Methylthiophene-3-Carboxylate
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 171,22 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Avoid
breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
No data available
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  2-氨基-5-甲基噻吩-3-羧酸甲酯 在 sodium azide 、 氯化铵 、 三氯氧磷 作用下， 以 氯仿 、 N,N-二甲基甲酰胺 为溶剂， 反应 30.5h， 生成 2-methyl-7-(1H-tetrazol-5-yl)-4H-pyrido[1,2-a]thieno[2,3-d]pyrimidin-4-one
  参考文献：
  名称：

  Synthesis and antiallergy activity of 4-oxo-4H-pyrido[1,2-a]thieno[2,3-d]pyrimidines

  摘要：

  A series of 4-oxo-4H-pyrido[1,2-a]thieno[2,3-d]pyrimidines with substitutions in the 2, 3, and 7 positions was prepared. The compounds were evaluated in the rat passive cutaneous anaphylaxis test for antiallergy activity. Several compounds had potent oral activity and were found to be superior to disodium cromoglycate and doxantrazole. Structure-activity relationships are discussed.

  DOI：

  10.1021/jm00139a021
• 作为产物：
  描述：

  丙醛 、 氰乙酸甲酯 在 sulfur 、 三乙胺 作用下， 反应 12.0h， 以33%的产率得到2-氨基-5-甲基噻吩-3-羧酸甲酯
  参考文献：
  名称：

  5-烷基-2-氨基-3-甲基羧酸盐噻吩具有显着的抗增殖活性和肿瘤细胞选择性。

  摘要：

  5-（2-（4-甲氧基苯基）乙基）-2-氨基-3-甲基羧酸噻吩（TR560）是最近发现的新型肿瘤选择性化合物的原型药物，该化合物优先抑制特定肿瘤细胞类型的增殖（例如白血病/淋巴瘤）。在这里，我们通过用烷基链取代4-甲氧基苯基部分来简化分子，从而进一步提高了肿瘤的选择性。几种在C-5处含有至少6个（己基）至9个（壬基）碳单元的烷基的2-氨基-3-甲基羧酸盐噻吩衍生物在500-1000的中纳摩尔范围内表现出显着的抗增殖活性。倍的肿瘤细胞选择性。这些化合物优先抑制T淋巴瘤CEM和Molt / 4，前列腺PC-3，肾Caki-1和肝癌Huh-7肿瘤细胞的增殖，但实际上对其他肿瘤细胞系（包括B淋巴瘤Raji和宫颈癌HeLa细胞）无活性。新型原型药物3j（包含5-庚基链）已在暴露4小时后引起细胞毒性而不是细胞抑制活性。异常的肿瘤选择性无法通过敏感肿瘤细胞与耐药肿瘤细胞对药物的差异吸收（或外排）来解释。

  DOI：

  10.1016/j.ejmech.2017.03.044

文献信息

• [EN] NON-ANNULATED THIOPHENYLAMIDES AS INHIBITORS OF FATTY ACID BINDING PROTEINI(FABP) 4 AND/OR 5<br/>[FR] THIOPHÉNYLAMIDES NON ANNELÉS UTILISÉS EN TANT QU'INHIBITEURS DE LA PROTÉINE DE LIAISON À UN ACIDE GRAS (FABP) 4 ET/OU 5
  申请人：HOFFMANN LA ROCHE

  公开号：WO2014040938A1

  公开（公告）日：2014-03-20

  The invention provides novel compounds having the general formula (I), wherein R1, R2, R3, R4, R5, R6 , R7, A, E and n are as described herein, compositions including the compounds and methods of using the compounds.

  这项发明提供了具有一般式（I）的新化合物，其中R1、R2、R3、R4、R5、R6、R7、A、E和n如本文所述，包括这些化合物的组合物以及使用这些化合物的方法。
• NOVEL COMPOUNDS AS CANNABINOID RECEPTOR LIGANDS
  申请人：Carroll William A.

  公开号：US20090018114A1

  公开（公告）日：2009-01-15

  The present application relates to cannabinoid receptor ligands containing compounds of formula (I) wherein A, R 1 , R 2 , and R 3 are as defined in the specification. The present application also relates to compositions comprising such compounds, and methods of treating conditions and disorders using such compounds and compositions.

  本申请涉及含有式(I)化合物的大麻素受体配体，其中A、R1、R2和R3如规范中所定义。本申请还涉及包含这种化合物的组合物，以及使用这种化合物和组合物治疗疾病和疾病的方法。
• Heterocyclic antiviral compounds
  申请人：Blake F. James

  公开号：US20060040927A1

  公开（公告）日：2006-02-23

  Compounds having the formula I wherein A, m and R 1 are herein defined are Hepatitis C virus polymerase inhibitors. Also disclosed are compositions and methods for treating diseases mediated by HCV and for inhibiting hepatitis replication. Also disclosed are processes for making the compounds and synthetic intermediates used in the process

  具有公式I的化合物，其中A、m和R1如本文所定义，是丙型肝炎病毒聚合酶抑制剂。还公开了用于治疗HCV介导的疾病和抑制肝炎复制的组合物和方法。还公开了制备这些化合物和用于该过程的合成中间体的方法。
• New non-annulated thiophenylamides
  申请人：HOFFMANN-LA ROCHE INC.

  公开号：US20150183778A1

  公开（公告）日：2015-07-02

  The invention provides novel compounds having the general formula (I) wherein R 1 , R 2 , R 3 , R 4 , R 5 , R 6 , R 7 , A, E and n are as described herein, compositions including the compounds and methods of using the compounds.

  这项发明提供了具有通式（I）的新化合物， 其中R1、R2、R3、R4、R5、R6、R7、A、E和n如本文所述，包括这些化合物的组合物和使用这些化合物的方法。
• [EN] SULFONYLUREA DERIVATIVES AND USES THEREOF<br/>[FR] DÉRIVÉS DE SULFONYLURÉE ET LEURS UTILISATIONS
  申请人：NODTHERA LTD

  公开号：WO2020249664A1

  公开（公告）日：2020-12-17

  The present disclosure relates to compounds of Formula (I) and to their prodrugs, pharmaceutically acceptable salts, pharmaceutical compositions, methods of use, and methods for their preparation. The compounds disclosed herein are useful for inhibiting the maturation of cytokines of the IL-1 family by inhibiting inflammasomes and may be used in the treatment of disorders in which inflammasome activity is implicated, such as inflammatory, autoinflammatory and autoimmune diseases and cancers.

  本公开涉及式(I)化合物及其前药、药用可接受盐、药物组合物、使用方法和制备方法。所公开的化合物可用于通过抑制炎症小体来抑制IL-1家族细胞因子的成熟，并可用于治疗炎症、自身炎症和自身免疫疾病以及癌症等炎症小体活性涉及的疾病。