3-(2-呋喃基)丙烷-1-草酸铵 | 4428-38-0

• 分子结构分类: 有机化合物 - 有机氮化合物
• 中文名称: 3-(2-呋喃基)丙烷-1-草酸铵
• 中文别名: 3-(2-呋喃)-1-丙胺
• 英文名称: 3-(furan-2-yl)propan-1-amine
• 英文别名: 3-(furan-2-yl)propyl-1-amine；3-(furan-2-yl)-propylamine；3-(2-Furyl)-1-propylamine；3-furan-2-yl-propylamine；3-[2]furyl-propylamine；3-[2]Furyl-propylamin
• CAS: 4428-38-0
• 化学式: C₇H₁₁NO
• mdl: MFCD06589771
• 分子量: 125.17
• InChiKey: BMBNEIGPGNXTRH-UHFFFAOYSA-N

物化性质

• 沸点：
  90.5 °C(Press: 15 Torr)
• 密度：
  1.001 g/cm3

计算性质

• 辛醇/水分配系数(LogP)：
  1.1
• 重原子数：
  9
• 可旋转键数：
  3
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.43
• 拓扑面积：
  39.2
• 氢给体数：
  1
• 氢受体数：
  2

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 3-(2-Furyl)-1-Propanamine
: CBR00236
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Serious eye damage (Category 1), H318
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi Irritant R41
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Danger
Hazard statement(s)
Causes serious eye damage.
Precautionary statement(s)
Wear protective gloves/ eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 125,17 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
3-(2-Furyl)-1-Propanamine
Eye Dam. 1; H318 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
3-(2-Furyl)-1-Propanamine
Xi, R41 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
No data available
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  3-(2-呋喃基)丙烷-1-草酸铵 在 三氟乙酸 作用下， 以 二氯甲烷 、 xylene 为溶剂， 反应 5.0h， 生成
  参考文献：
  名称：

  使用NBS促进的六氢吲哚满酮衍生物的环化反应，可以高效合成（+/-）-异戊s啶。

  摘要：

  NBS促进的六氢吲哚满酮衍生物的分子内亲电芳族取代反应用于组装赤藓烷骨架的四环核。在另外三个步骤中，将所得的环化产物转化为（+/-）-异戊酰胺。使用各种取代的芳基和呋喃基双环内酰胺在酸性条件下，环化反应也很成功。[反应：看文字]

  DOI：

  10.1021/ol036106r
• 作为产物：
  描述：

  反-3-(2-呋喃基)丙烯醛 在 乙醇 、 氨 、 镍 作用下， 70.0~100.0 ℃ 、9.81 MPa 条件下， 生成 3-(2-呋喃基)丙烷-1-草酸铵
  参考文献：
  名称：

  Alaupovic, Arhiv za Kemiju, 1953, vol. 25, p. 257

  摘要：

  DOI：

文献信息

• THERAPEUTIC AGENT FOR CEREBRAL INFARCTION
  申请人：Nakao Akira

  公开号：US20120196824A1

  公开（公告）日：2012-08-02

  The invention provides a therapeutic drug for ischemic stroke. The therapeutic drug has the formula (I) wherein each symbol is as defined herein, or a pharmacologically acceptable salt thereof, or a solvate thereof, as an active ingredient.

  这项发明提供了一种用于缺血性中风的治疗药物。该治疗药物具有如下式（I）的化学式，其中每个符号如本文所定义，或其药理学上可接受的盐，或其溶剂化物，作为活性成分。
• Pyrimidine derivatives as IL-8 receptor antagonists
  申请人：——

  公开号：US20040087601A1

  公开（公告）日：2004-05-06

  Compounds containing the pyrimidine nucleus and their use to treat diseases and conditions related to inappropriate Interleukin-8 receptor activity are disclosed. The compounds are of the formula I 1 In these compounds, Q is preferably unsubstituted and substituted heterocyclyl; U is usually hydrogen or fluorine; and V is preferably hydrogen, halogen, alkyl, —O—alkyl or —S-alkyl. A representative example is: 2

  含有嘧啶核的化合物及其用于治疗与不适当的白细胞介素-8受体活性相关的疾病和症状的用途已被披露。这些化合物的结构式为I 1 在这些化合物中，Q最好是未取代或取代的杂环烷基；U通常是氢或氟；V最好是氢、卤素、烷基、—O—烷基或—S-烷基。一个代表性的例子是： 2
• Quinoline derivatives as antibacterials
  申请人：——

  公开号：US20040053928A1

  公开（公告）日：2004-03-18

  Aminopiperidine derivatives and pharmaceutically acceptable derivatives thereof useful in methods of treatment of bacterial infections in mammals, particularly in man.

  氨氧哌啶衍生物及其药用可接受的衍生物，用于治疗哺乳动物，特别是人类的细菌感染。
• [EN] SUBSTITUTED BENZIMIDAZOLE CARBOXAMIDES AND THEIR USE IN THE TREATMENT OF MEDICAL DISORDERS<br/>[FR] BENZIMIDAZOLE CARBOXAMIDES SUBSTITUÉS ET LEUR UTILISATION DANS LE TRAITEMENT DE TROUBLES MÉDICAUX
  申请人：BIAL BIOTECH INVEST INC

  公开号：WO2021055591A1

  公开（公告）日：2021-03-25

  The invention provides substituted benzimidazole carboxamides and related compounds, compositions containing such compounds, medical kits, and methods for using such compounds and compositions to treat a medical disorder, e.g., cancer, lysosomal storage disorder, neurodegenerative disorder, inflammatory disorder, in a patient.

  这项发明提供了替代苯并咪唑羧酰胺及相关化合物，含有这些化合物的组合物，医疗工具包，以及使用这些化合物和组合物治疗患者的医疗疾病的方法，例如癌症、溶酶体贮积症、神经退行性疾病、炎症性疾病。
• Synthesis of Magnetic-Nanoparticle/Ansamitocin Conjugates-Inductive Heating Leads to Decreased Cell Proliferation In Vitro and Attenuation Of Tumour Growth In Vivo
  作者：Katja Seidel、Asha Balakrishnan、Christoph Alexiou、Christina Janko、Ronja-Melinda Komoll、Liang-Liang Wang、Andreas Kirschning、Michael Ott

  DOI：10.1002/chem.201701491

  日期：2017.9.7

  Conjugates based on nanostructured, superparamagnetic particles, a thermolabile linker and a cytotoxic maytansinoid were developed to serve as a model for tumour-selective drug delivery and release. It combines chemo- with thermal therapy. The linker-modified toxin was prepared by a combination of biotechnology and semisynthesis. Drug release was achieved by hyperthermia through an external oscillating

  基于纳米结构，超顺磁性颗粒，不耐热连接子和细胞毒性美登木素生物碱的结合物被开发为肿瘤选择性药物递送和释放的模型。它结合了化学疗法和热疗法。通过生物技术和半合成的结合制备接头修饰的毒素。药物的释放是通过外部振荡的电磁场通过热疗实现的，该电磁场在颗粒内部产生热量。在异种移植小鼠模型中证明了该释放概念对于体外癌细胞增殖和体内肿瘤生长均有效。这些磁性纳米颗粒/安那托霉素偶联物的生物相容性研究对这项工作起到了补充作用。